A generic wood cabinet with the handles toward the bottom that you can specify to meet you need. You can move the handles and change the material if needed in the family view.

Product Version: Unknown

29110 downloads

Lazy Susan with 1 connected swing out door and TWO rotating shelves

Image is from http://trendkitchencabinets.com/wp-content/uploads/2012/11/Menards-Kitchen-Cabinets-Unfinished-1.jpg 

Product Version: Revit Architecture 2013

16003 downloads

wall based 6ft wide by 3ft high mirror designed for public bathrooms. Default 4ft above floor.

Product Version: Unknown

37976 downloads

Adjustable Double vanity bench top and tops. Not fully modeled. Better be used only in plan and elevation views.

Product Version: Revit Architecture 2016

4405 downloads

Angled corner cupboard. (Part of the default revit domestic kitchen set)

No rating

Product Version: Revit Architecture 2008

3680 downloads

No rating

Product Version: Unknown

1377 downloads

Product Version: Unknown

18241 downloads

Base Cabinet - Open

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

4243 downloads

Base Cabinet - 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

7183 downloads

Base Cabinet - 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

12361 downloads

Base Cabinet - Sink, 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

4807 downloads

Base Cabinet - Sink, 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

7949 downloads

Base Cabinet - False front, open

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

2376 downloads

Base Cabinet - False front, 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

2745 downloads

Base Cabinet - False front, 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

3872 downloads

Base Cabinet - 1 Drawer above open

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

3269 downloads

Base Cabinet - 1 Drawer above 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

5206 downloads

Base Cabinet - 1 Drawer above 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

5658 downloads

Base Cabinet - 3 Drawer

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

8109 downloads

Base Cabinet - 4 Drawer

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

7505 downloads

Wall Cabinet - Open

 *** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

4089 downloads

Wall Cabinet - 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

6171 downloads

Wall Cabinet - 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

9869 downloads

Wall Cabinet - 2 Door above microwave shelf

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

6782 downloads

Tall Cabinet - Open

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

6337 downloads

Tall Cabinet - 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

9240 downloads

Tall Cabinet - 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

15098 downloads

Tall Cabinet - Open with Divider

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

3671 downloads

Tall Cabinet - 1 Door above 2 Drawer

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No rating

Product Version: Revit Architecture 2014

4878 downloads

Base Cabinet - Acid Cabinet - Wall Mounted - Lab

Product Version: Revit Building 5.1

11135 downloads