I make this object for break waves, cause we have more than 18.000 islands...Surya Consultant, Tual, Maluku Tenggara, Indonesia..

Product Version: Revit Architecture 2008

1494 downloads

2 lane parametric Parking Ramp

Product Version: Unknown

14178 downloads

2 lane parametric Parking Ramp

Product Version: Unknown

3445 downloads

These is a 2d Post Tension Cable call out and symbols. Below is a list of the files that are used with it. Please let me know if you see something that would make these better.

PT - Post Tension.rfa is the main file. It's the one will use to place your cable. I have 4 Family Types setup in it. It can be easily changed up to do what ever you need.

PT - Force Tag.rfa is the tag that you need to call out the Force on that Cable. There are 2 types setup here. one for Kips Per FT and one for Total Kips.

PT - Text is used to show the height of the cable. PT-text are just symbols you can place them were ever you need them.

PT - Offset End. I made it up so if i need to work around an opening in the slab. It's still in Beta. It will get you around the opening but you are going to have to work for it. I'm hoping to think of a better way to do it later on.

You will also need to add two Parameters to your Shared Parameters. One called FORCE for Discipline Structural and Type of Parameter Force. The other is FORCE PER FOOT for Discipline Structural and Type of Parameter Linear Force.

Product Version: Revit Structure 2013

1525 downloads

3/4" chamfered curb, Adjustable width and height

Product Version: Revit Structure 2009

8672 downloads

3/4" chamfered curb with adjustable width and height

No rating

Product Version: Revit Structure 2009

3926 downloads

This profile may be used to create a concrete curb at sidewalks, etc... It is 6" high but, it can be edited as desired. Use with Host sweep\floor slab edge.

Product Version: Revit Architecture 2009

24812 downloads

8X16 concrete footer

No rating

Product Version: Unknown

6460 downloads

This fully parametric handicap accesible ramp with flared sides is based on a 1:12 slope for the ramp and 1:10 slope for the flared sides. Adjust the curb height and the ramp automatically calculates the depth and the width of the flares. The ramp width itself is expandable and the material is changeable. You can recalculate the slope ratios to meet your local codes. Enjoy!

Product Version: Revit Building 8

20129 downloads

This was my first family for drafting views. It makes revising footings simple I think

Product Version: Revit Architecture 2014

766 downloads

Product Version: Revit Architecture 2010

9814 downloads

Industrial column - Cot nha cong nghiep 1 vai

Product Version: Revit Architecture 2011

7115 downloads

Industrial column - Cot nha cong nghiep 2 vai

Product Version: Revit Architecture 2011

7222 downloads

Parametric Footing for variable size thickness & ecentricity

No rating

Product Version: Revit Architecture 2008

3641 downloads

Fully Parametric Column with Drop Panel

No rating

Product Version: Revit Structure 2014

2259 downloads

Fully parametric column with Drop Panel with Corner Cut

No rating

Product Version: Unknown

1179 downloads

Fully parametric for column & footing size along with variable thickness of footing & ecenricity.

No rating

Product Version: Revit Architecture 2008

4271 downloads

This is a simple concrete apron I made. Used for ADA access to sidewalks from the street and the like.  Nothing special about it. I think it is parametric. I got tired of my void forms not working so i made this. 

This is a face based family. 

Let me know if this doesn't work or how it can be impoved. This is my first upload. 

Thanks

No rating

Product Version: Unknown

941 downloads

This is a simple concrete apron I made. Used for ADA access to sidewalks from the street and the like.  Nothing special about it. I think it is parametric. I got tired of my void forms not working so i made this. 

This is a face based family. 

Let me know if this doesn't work or how it can be impoved. This is my first upload. 

Thanks

No rating

Product Version: Unknown

273 downloads

Fully parametric Concrete Column Capital and Drop Panel

No rating

Product Version: Revit Architecture 2009

3001 downloads

Parameters: Length, Width, and Thickness on both sides

(Fixed Material Graphics from the Older Version)

Enjoy and give your Feedback :)

Product Version: Revit Architecture 2014

1446 downloads

This is a Concrete Drilled Pier with an optional bell.

Product Version: Unknown

4210 downloads

Level based model component of a concrete driveway apron, to be placed at the threshhold of an overhead garage door leading to the driveway. Length is adjustable, dimensions of profile can be changed in type editor.

Created with Autodesk Revit 2023

No rating

Product Version: Unknown

250 downloads

No rating

Product Version: Revit Architecture 2015

2735 downloads

No rating

Product Version: Revit Architecture 2009

1705 downloads

A parametric conical column I created for a project.

No rating

Product Version: Unknown

5151 downloads

Fully parametric column footing with provision for eccentricity of column to footing. All parameters are adjustable

Product Version: Revit Architecture 2009

2175 downloads

This is a *curtain wall panel* that was modeled as an example on the forums.  It is a proof of concept, inflexible and non-parametric, and needs a grid spacing of 6' 3.5". 

Maybe someone will find a use for it.

No rating

Product Version: Revit Architecture 2012

4705 downloads

Use this profile to sweep along a path to model your curb & gutter.

Product Version: Revit Architecture 2009

3366 downloads

I defined a wall foundation family for a curved wall

No rating

Product Version: Unknown

1177 downloads