 |
Filtrine Model ES-2-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-100' via recirculating drinking water loop. (2) Gal. storage tank. Serves a population of (100), (assuming 1 qt./day/person typical usage). |
|
Product Version: Revit Architecture 2012
1452 downloads
|
|
 |
Parametrical in radius, radius in and height..used for water channel..Surya Consultant, Tual |
|
Product Version: Revit Architecture 2008
2028 downloads
|
|
|
 |
Started with the Revit 2017 Out-Of-Box Ball Valve (Pipe Accessory) and added additional valve symbol as model lines so that the valve symbol still shows up in course detail level, even if the valve is rotated to the side of the pipe. You will need to disable the checkbox for "Symbol Top Visible" or the checkbox fo "Symbol End Visible" depending on how the valve is rotated. (I'm open to suggestions on better ways to do it, but ran out of time for now.) |
No rating |
Product Version: Revit MEP 2016
751 downloads
|
|
|
 |
Forsøg på at lave Hansgrohe produktet:
Raindance Select 300x160 2jet Showerpipe
I have tried to make a product form the manufacturer Hansgrohe. The name of the product is:
Raindance Select 300x160 2jet Showerpipe |
|
Product Version: Revit Architecture 2013
3305 downloads
|
|
|
 |
Turn down slab edges to sloped slab. Grating over the top. Includes detail components in fine detail.
This is my comanies standard trench drain and I got tired of modeling it piece by piece.
Revit 2017 |
|
Product Version: Unknown
3284 downloads
|
|
|
 |
Compressed air carriage |
|
Product Version: Revit MEP 2013
2095 downloads
|
|
|
 |
erher |
No rating |
Product Version: Revit Architecture 2018
321 downloads
|
|
|
 |
This is a fully parametric sink with shared faucet and drains. |
|
Product Version: Revit Architecture 2013
65242 downloads
|
|
|
 |
A drinking fountain modeled in 2016 Revit. |
|
Product Version: Unknown
13514 downloads
|
|
|
 |
Granudos Plus |
|
Product Version: Revit MEP 2013
641 downloads
|
|
|
 |
800 gallon grease trap/oil interceptor |
No rating |
Product Version: Revit Architecture 2018
726 downloads
|
|
|
 |
Gully Trap
Classified as fitting in order to keep the values of flow fixture units |
No rating |
Product Version: Unknown
2248 downloads
|
|
|
| |
Exterior tap for hose connection |
|
Product Version: Revit Building 9.1
7865 downloads
|
|
|
| |
Exterior Hose Bibb with adjustable length |
No rating |
Product Version: Revit Building 9.1
3469 downloads
|
|
|
 |
Inspection Chamber having 3 inlet port and 1 outlet port
(it has been classified as pipe fitting in order to calculate the flow fixture units) |
|
Product Version: Unknown
2803 downloads
|
|
|
 |
The JUAL Angular bowl outlet consists of a bowl which cumulates the water before it is led to the pipe system of the building. The outlet is delivered with standard pipe diametres 50, 63 and 75 mm.The bowl outlet is made from stainless steel and is delivered with Integrated bitumen or foil membrane.
|
No rating |
Product Version: Revit Architecture 2019
110 downloads
|
|
|
 |
The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types. |
No rating |
Product Version: Revit Architecture 2019
101 downloads
|
|
|
 |
The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types. |
No rating |
Product Version: Revit Architecture 2019
203 downloads
|
|
|
 |
The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types. |
No rating |
Product Version: Revit Architecture 2019
186 downloads
|
|
|
 |
The vertical bowl outlet consists of a bowl that cumulates the water before it flows down into the pipe system of the building via vertical pipes of standard diametres from ø50 to ø110 mm.Bowl outlets are made from stainless steel and can be delivered with integrated bitumen or foil membrane. |
No rating |
Product Version: Revit Architecture 2019
97 downloads
|
|
|
 |
The vertical bowl outlet consists of a bowl that cumulates the water before it flows down into the pipe system of the building via vertical pipes of standard diametres from ø50 to ø110 mm.Bowl outlets are made from stainless steel and can be delivered with integrated bitumen or foil membrane. |
No rating |
Product Version: Revit Architecture 2019
102 downloads
|
|
|
 |
JUAL Outlet with rectangular pipe. The outlet can be supplied in many different standard dimensions with a cross section ranging from 77x56 to 500x100 mm and lengths from 400 mm to 1000 mm.
|
No rating |
Product Version: Revit Architecture 2019
86 downloads
|
|
|
 |
JUAL Outlet with rectangular pipe. The outlet can be supplied in many different standard dimensions with a cross section ranging from 77x56 to 500x100 mm and lengths from 400 mm to 1000 mm.
|
No rating |
Product Version: Revit Architecture 2019
40 downloads
|
|
|
 |
JUAL Outlet with rectangular pipe. The outlet can be supplied in many different standard dimensions with a cross section ranging from 77x56 to 500x100 mm and lengths from 400 mm to 1000 mm.
|
No rating |
Product Version: Revit Architecture 2019
39 downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No rating |
Product Version: Revit Architecture 2019
57 downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No rating |
Product Version: Revit Architecture 2019
35 downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No rating |
Product Version: Revit Architecture 2019
40 downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No rating |
Product Version: Revit Architecture 2019
30 downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No rating |
Product Version: Revit Architecture 2019
72 downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No rating |
Product Version: Revit Architecture 2019
40 downloads
|
|
|
Search