Rooftop Ventilation Hood on Sloped Roof
8070 Downloads
|
 | 
| |
This is an instance based parametric model of a rooftop ventilation hood with an associated roof curb. The model is roof hosted and remains vertical while the base of the curb follows the slope of the roof. There are 4 main parameters that you can adjust and are as follows:
1) Roof Pitch Numerator: You will need to type in and match the roof pitch of the roof you are placing the vent hood upon. For example, if the roof is a 6:12 pitch, enter 6".
2) Roof Opening Width and Roof Opening Depth: Specify the opening you need. The Depth is the dimension along the slope of the roof.
3) Roof Curb Minimum Height: This will be the minimum height you require at the shortest height of the curb on the slope.
|
|
CSI Division: 23 00 00 Heating, Ventilating, & Air-Conditioning
RevitCity Division: Equipment > Miscellaneous
Product Version: Revit Architecture 2014 |
Uploaded By: jroh
Uploaded On: Thu, Aug 21, 2014
Original Creator: JRoh Digital
|
|
Comments
|
Fri, Aug 22, 2014 at 3:18:26 AM
#1
|
|
site moderator
Joined Tue, May 22, 2007
 This user is offline |
"There are 4 main parameters that you can adjust and are as follows:" ---- and the 4th is???
|
|
|
Mon, Jun 22, 2015 at 3:56:56 PM
#2
|
|
active
Joined Wed, Feb 9, 2005
 This user is offline |
The 4th is the width. The description simply states that the depth is the dimension along the roof slope so the width is obviously measuring the other way, side-to-side.
|
|
|
Search