18050 Downloads

This is my first upload so please be gentel.  This is a simple family that allows you to place a shower partition with a curb on 4 sides and glass for the partition, in a room.  You can change a lot,

• Curb Heights - independent on all 4 sides


• Curb depth


• Overall Height


• Overall Width (you should be able to use align and lock to make it stretch.


• 2 - Panel or 3- Panel glass partition


• Each partition door has a 2D 45 degree rep for plan view.


• Each partition configuration allows you to put in two override dimensions that I will try to explain.


• Override Panel Width - If you need one of the panels to be say "6" use this to do that.  When this is set to 0 it should return to equal equal.


• Override Door Width - If you need the door to be a certain width say 30" enter it here.

This model is not foolproof, although I did do a few basics to keep people out of trouble, like a minimum door height and glass thickness.  But if you try to specify a panel override width and a door override width on the 2 panel with the curbs locked to the wall it will probably break.  However if you do that on the 3 panel, the 3rd panel will take up the slack.

Please leave your comments for me.  Thanks.

Product Version: Revit Architecture 2013

Uploaded By: RavenTech
Uploaded On: Sat, Apr 13, 2013
Original Creator: Raven Designs LLC