Series WCA-411-D/WCA-411-D-WC back-to-back floor mounted concealed arm lavatory carrier with heavy gauge steel offset uprights with integral welded feet, adjustable epoxy coated cast iron arms with leveling screws and basin locking device, upper tie rod, and plated hardware.

No Rating

Product Version: Revit MEP 2014

21 Downloads

Series FD-100-B epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary & secondary weepholes, adjustable heavy duty round heel proof nickel bronze strainer, and no hub (standard) outlet

No Rating

Product Version: Revit MEP 2014

137 Downloads

Series FD-100-L epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary & secondary weepholes, adjustable heavy duty square heel proof nickel bronze strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

173 Downloads

Series FD-100-EG epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary & secondary weepholes, adjustable heel proof nickel bronze strainer with 4 in.(102mm) x 9 in.(229mm) oval nickel bronze funnel, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

70 Downloads

Series FD-230-A epoxy coated cast iron floor drain/cleanout combination with anchor flange, integral trap, membrane clamp with weepholes, adjustable round heel proof nickel bronze strainer & cleanout top, removable plug, and no hub outlet.

No Rating

Product Version: Revit MEP 2014

404 Downloads

Series TCA-440 epoxy coated wall mounted concealed arm track lavatory carrier come with heavy gauge steel cross plate and back-up mounting plates, sliding adjustable arm brackets, adjustable epoxy coated cast iron arms with leveling screws and basin locking device and plated hardware.

No Rating

Product Version: Revit MEP 2014

51 Downloads

Series TCA-450 epoxy coated wall mounted concealed arm track lavatory carrier for 27x20 lavatories come with heavy gauge steel cross plate and back-up mounting plates, sliding adjustable arm brackets, adjustable epoxy coated cast iron arms with leveling screws and basin locking device and plated hardware.

No Rating

Product Version: Revit MEP 2014

46 Downloads

Series LF6 & LFP6 MIDI Check Valves operate efficiently and silently with all of the functions of a swing check or vertical lift check valve. These are not suggested for installation in sewage ejector piping. The LF6/P6 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

307 Downloads

Series 27 V-Pattern Cast Copper Silicon Alloy Strainers are designed to protect system components from dirt, rust and other damaging debris in the piping system. This series is ideal for beverage dispensers, ice cube machines, dental equipment, instrument control systems and similar applications.

No Rating

Product Version: Revit MEP 2014

99 Downloads

Series LF909 prevents the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a potential health hazard. An exclusive relief valve design provides substantially improved relief valve discharge performance during emergency conditions of combined backsiphonage and backpressure. The seats are replaceable for economical repair. Smaller sizes can be installed vertically or horizontally.

No Rating

Product Version: Revit MEP 2014

486 Downloads

Series LF6 & LFP6 MIDI Check Valves operate efficiently and silently with all of the functions of a swing check or vertical lift check valve. These are not suggested for installation in sewage ejector piping. The LF6/P6 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

226 Downloads

Series TCA-411 epoxy coated floor mounted concealed arm track lavatory carrier with heavy gauge steel offset uprights with welded feet, steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

83 Downloads

Series Dead Level BK Pre-Sloped Trench Drain System with 6(152) wide x 48(1219) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4(102) No Hub bottom outlet(s). System shall be frame-anchored, with BK grating. System to include frame connectors, grate lock-downs, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

166 Downloads

Series Dead Level S Deck Channel system with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4" IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and recommendations.

No Rating

Product Version: Revit MEP 2014

206 Downloads

Series TCA-411-D-WC epoxy coated back-to-back floor mounted concealed arm track lavatory carrier for 27 x 20 lavatories, with heavy gauge H2267steel offset uprights with welded feet, steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

32 Downloads

Series F100, F1100 are single chamber basic valves that incorporate a one-piece disc and diaphragm assembly. This assembly is the only moving part within the valve allowing it to open, close or modulate as commanded by the pilot control system. Model F100 is a globe pattern design. Model F1100 is an angle pattern design.

No Rating

Product Version: Revit MEP 2014

912 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. They have a bronze (1/2 to 2 in.) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

229 Downloads

Series LF777S, LFS777S Wye-Pattern Lead Free* Bronze Strainers are designed to protect system components from dirt, rust and other damaging debris in the piping system. This series features a retainer cap tapped for closure plug. The LF777S and LFS777S feature Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

163 Downloads

Series TCA-411-D epoxy coated back-to-back floor mounted concealed arm track lavatory carrier with heavy gauge steel offset uprights with welded feet, double steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

28 Downloads

Series 957, 957N, 957Z Reduced Pressure Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a potential health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. Groove connections also ease installation and pipe alignment. A variety of shutoff valve options are available.

No Rating

Product Version: Revit MEP 2014

725 Downloads

Series Dead Level D Pre-Sloped Trench Drain System with 6 in.(152mm) wide x 48 in.(1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4(102) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

422 Downloads

Series Dead Level DX Pre-Sloped Trench Drain System with 12 in.(305mm) wide x 48 in.(1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with 6 in.(152mm) No Hub Bottom or End outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

245 Downloads

Series LF777S, LFS777S Wye-Pattern Lead Free* Bronze Strainers are designed to protect system components from dirt, rust and other damaging debris in the piping system. This series features a retainer cap tapped for closure plug. The LF777S and LFS777S feature Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

147 Downloads

Series TD-300 Elevator Channel Drain with 11-3/4 (298) wide x (specify) long 12 ga. type 304 stainless steel body, heel proof and ADA compliant load class B stainless steel grating with grate open area of 65 sq. in. per foot is secured with vandal-proof stainless steel screws, and 4 (110) no hub center outlet. Complies with 2013 California Building Code 403.6.1, 403.6.2, 3007.4, 3008.4, and SFFC Section 511.1.4 for a flow rate of 100 GPM.

No Rating

Product Version: Revit MEP 2014

460 Downloads

Series LFFBV-4B, LFFBVS-4B 2-Piece, Full Port, Brass Ball Valves are suitable for a full range of liquids and gases in residential and commercial applications. These valves feature an adjustable packing for longer service life, a bottom loaded blow-out proof stem for safety, a fluorocarbon elastomer stem O-ring to prevent stem leaking at installation, and are rated to 600psi WOG/150psi WSP 1⁄4"– 3".

No Rating

Product Version: Revit MEP 2014

678 Downloads

Series Dead Level Z Parking Deck Channel System with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame with integral deck flange, UV stabilized talc-filled polypropylene channels with integral 4 in IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. System can be specified in 1 in (305mm) increments. Installation to be performed in accordance with manufacturer's recommendations.

No Rating

Product Version: Revit MEP 2014

235 Downloads

Series LF4001E Lead Free* Dielectric Unions feature a female iron pipe thread to solder connection. Compliant to American Society of Sanitary Engineering ASSE Standard 1079-2005. These unions are designed to be installed between pipe made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. Maximum Pressure: 250psi (17.2 bar). Maximum Temperature: 180°F (82°C)

No Rating

Product Version: Revit MEP 2014

93 Downloads

Series LF3006 Dielectric Unions feature a female iron pipe thread to female iron pipe thread (black). These unions are designed to be installed between pipe made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. The LF3006 features Lead Free* construction to comply with Lead Free* installation requirements. Maximum Pressure: 250psi (17.2 bar).

No Rating

Product Version: Revit MEP 2014

216 Downloads

Series Dead Level P Pre-Sloped Trench Drain System with 6 in.(152mm) wide x 48 in.(1219mm) long (standard) UV stabilized glass-filled polypropylene frame, UV stabilized talc-filled polypropylene channels with integral 4 in.(102mm) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

206 Downloads

Series LFN45B-L Lead Free* Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Available with double union threaded or solder end connections. Standard pressure setting is 50psi with an adjustable range of 25 ‒ 75psi (172 ‒ 517 kPa).

No Rating

Product Version: Revit MEP 2014

432 Downloads