POOL SPOT

Art. S.3693 12 MODULES LED RGBW (W=6000K)  24VdcRated luminaire luminous flux: 430lmRated input power: 31WLuminaire efficacy: 14lm/WRequires remote ON-OFF power supply or Dimmable power supply CELUMINAIRE TYPESubmersion luminaire. IP rating IP 68MATERIAL CHARACTERISTICSTalc-filled technopolymer housing. Marine grade stainless steel AISI 316L front trim 2 mm thick. A4 grade Stainless Steel screws with 2,5-3% molybdenum content whitch increases the resistance against corrosion. Toughened transparent glass 4mm thick for MICROPOOL SPOT, 8mm MINIPOOL SPOT and POOL SPOT. Mechanical resistance IK 10 Silicone gaskets.LIGHTING PERFORMANCEThe spectral distribution of the light is intended to change the appearance of the scene or object lit. Not intended for use in other applications. Lamp  fixed position. LOR -- WIRINGPOOL SPOT requires a FLANGE accessory to anchor the fitting to the bottom of pools or fountains. The stainless steel flange is supplied with fastening screws, both for fixing the fitting to the flange and for the anchorage to the bottom of the pool. Should the fixation with screws be impossible, the weight of the accessory still allows to keep the luminaire sitting on the bottom of the pool. Single cable entry with M20 brass cable gland. Luminaire hard wired with 6 m. cable (5 x 1mm²) cable type H07RN8-F for MICROPOOL RGBW, 6 m. cable (5 x 1mm²) cable type H07RN8-F for MINIPOOL RGBW and 8 m. cable (5 x 1mm²) cable type H07RN8-F for POOL RGBW closed by cable gland and sealed with B component epoxy resin, wired internally protected by silicon sheaths Isolation: CLASS III . Available colours: Stainless steel (cod.19). Weight: 4.48 Kg LED circuit included. Not suitable to install outside the water.The luminaire cannot be installed out of the water. Not compatible with pools containing salt water and that are treated with salt water chlorinationPOOL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

929 Downloads

Series RD-400 epoxy coated cast iron deck receptor drain with 2 in. (51mm) high receptor flange, internal dome strainer and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

31 Downloads

Series RD-410 epoxy coated cast iron deck receptor drain with 2 in. (51mm) high receptor flange, internal dome strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

56 Downloads

Series RD-500 epoxy coated cast iron roof drain with flashing clamp with integral gravel stop, self-locking ductile iron dome, and no hub outlet.

No Rating

Product Version: Revit MEP 2014

147 Downloads

Series RD-100 epoxy coated cast iron roof drain with flashing clamp with integral gravel stop, self-locking polyethylene dome (standard), and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

203 Downloads

Series RD-200 epoxy coated cast iron roof drain with flashing clamp with integral gravel stop, self-locking polyethylene dome (standard), and no hub (standard) outlet

No Rating

Product Version: Revit Structure 2014

146 Downloads

Series RD-300 epoxy coated cast iron roof drain with flashing clamp with integral gravel stop, self-locking polyethylene dome (standard), and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

121 Downloads

Series FD-530 epoxy coated offset parking area drain with fabricated steel body and extra heavy duty 24-1/2 in. x 24-1/2 in. (622 x 622mm) two-section ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

173 Downloads

Epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable square solid hinged nickel bronze strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

102 Downloads

Series FD-320-Y epoxy coated cast iron area drain with anchorflange, weepholes, 8 in.(203mm) diameter fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

74 Downloads

Series FD-410 epoxy coated steel catch basin with anchor flange, 24 1/2 in x 24 1/2 in (622mm x 622mm) top with loose set heavy duty cast iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

151 Downloads

Series FD-1100-M epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable square stainless steel strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

74 Downloads

Series FD-100-AS epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable nickel bronze angle strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

157 Downloads

Series RD-230 epoxy coated cast iron side outlet balcony drain with flashing clamp, cast nickel bronze dome strainer, and IPS threaded outlet.

No Rating

Product Version: Revit MEP 2014

99 Downloads

Series RD-240 epoxy coated cast iron bottom outlet balcony drain with flashing clamp, cast nickel bronze dome strainer, and IPS threaded outlet.

No Rating

Product Version: Revit MEP 2014

129 Downloads

Series FD-300 epoxy coated cast iron area drain with anchor flange, weepholes, 7 in. (178mm) diameter adjustable top with heel proof ductile iron grate and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

57 Downloads

Series FD-310 epoxy coated cast iron heel proof area drain with anchor flange, weepholes, 7 in. (178mm) diameter fixed top with ductile iron grate, and no hub(standard) outlet.

No Rating

Product Version: Revit MEP 2014

38 Downloads

Series FD-340-Y epoxy coated cast iron area drain with anchor flange, weepholes, 12-1/2 in(318 mm) diameter fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

47 Downloads

Series FD-360-Y epoxy coated cast iron area drain with anchor flange, weepholes, 15-1/2 in (394mm) diameter fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

44 Downloads

Series FD-200-H on-grade epoxy coated cast iron floor drain with anchor flange, weepholes, adjustable heel proof nickel bronze strainer with wide flange, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

47 Downloads

Series RD-100-W epoxy coated cast iron overflow roof drain with flashing clamp with integral 4 in.(102mm) high internal standpipe, self-locking polyethylene dome (standard), and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

106 Downloads

Series RD-200-W epoxy coated cast iron overflow roof drain with flashing clamp with integral 4 in. (102mm) high internal standpipe, self-locking polyethylene dome (standard), and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

64 Downloads

Series RD-300-W epoxy coated cast iron overflow roof drain with flashing clamp with integral 4 in (102mm) high internal standpipe, self-locking polyethylene dome (standard), and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

62 Downloads

Series FD-380 epoxy coated cast iron wood floor drain with 5 in.(127mm) round adjustable heel proof nickel bronze top, steel securing flange with countersunk holes and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

163 Downloads

Series CA-401 floor mounted exposed arm lavatory carrier with heavy gauge steel uprights with integral welded feet, epoxy coated steel arms (specify length), upper tie rod, and plated hardware.

No Rating

Product Version: Revit MEP 2014

82 Downloads

Series FD-320 epoxy coated cast iron area drain with anchorflange, body collar with weepholes, 8 in.(203mm) diameter adjustable top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

58 Downloads

Series FD-330-Y epoxy coated cast iron area drain with anchor flange, weepholes, 8 in. x 8 in. (203 x 203mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

123 Downloads

Series FD-330-Y epoxy coated cast iron area drain with anchor flange, weepholes, 8 in. x 8 in. (203 x 203mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

35 Downloads

Series FD-460-F epoxy coated cast iron area drain with anchor flange, weepholes, 12-3/4 in. x 12-3/4 in. (324 x 324mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

67 Downloads

Series FD-460-F epoxy coated cast iron area drain with anchor flange, weepholes, 12-3/4 in. x 12-3/4 in. (324 x 324mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

61 Downloads