Brass Cleanout Plug

No Rating

Product Version: Revit Structure 2014

105 Downloads

Inspired by JAMES termotanque linea cilíndrica cobre

Model Wall Based / basado en muro

Parametric 40, 60 & 80 Litres

Detail level: LOW - MEP level: LOW - Annotations: YES

No Rating

Product Version: Revit Architecture 2017

1723 Downloads

Series LF215 Super Sensitive Low Pressure Regulators are designed to meet low pressure precision requirements. The high ratio of diaphragm to orifice provides excellent performance and stability at low reduced pressure. The Series LF215 is ideally suited for water requirements up to 2.5 gpm (9.5 lpm) due to its Lead Free* brass body and brass and stainless steel internal parts. The LF215 is also suitable for pressure supply to wall attachment fluidic devices. The LF215 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

91 Downloads

Two "beds" to lay down, and bench seating the rest of the way around. Complete with headrests and an LED ambient lighting fixture. Filled with water.

Product Version: Revit Architecture 2010

1720 Downloads

Series 774DCDA Double Check Detector Assemblies prevent the backflow of fire protection system substances from being pumped or siphoned into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body, thermoplastic and stainless steel check valves, and low head loss. Series 774DCDA can be installed in the horizontal or vertical flow-up positions. It is designed for installation on applications identified by local authorities as non-health hazard, such as on fire protection systems. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

541 Downloads

Wall Cleanout with Brass Plug, Stainless Steel Cover

No Rating

Product Version: Revit Structure 2014

98 Downloads

Series LFFBV-3C-QC 2-Piece, Full Port, Lead Free* cast copper silicon alloy Ball Valves with Quick-Connect Technology are used in residential and commercial potable water applications. They feature a bottom-loaded blowout proof stem, virgin PTFE seats and thrust washer, adjustable packing gland, stem packing nut, chrome-plated brass ball adapter and steel handles. Comes with integral Quick-Connect inlet and outlet connections for fast installation on copper, CPVC, PEX, and PB pipe.

No Rating

Product Version: Revit MEP 2014

570 Downloads

Original Design. Meant to be used in as water sprayer, possible in customized poolside showers or wherever. Created in Revit Architect (Student Version) 2011. Used catelog imagery as guide. (Please, no genetalia jokes. I'm perfectly aware of how it looks.)

Product Version: Unknown

1007 Downloads

Dispenser for Milli-Q Integral, Milli-Q Advantage, or Elix Advantage laboratory pure/ultrapure water systems.

Product Version: Revit Architecture 2013

1627 Downloads

This is just an update of my first upload, added a non parametric chilled water connections (supply and return) and a power supply inlet.

Product Version: Revit MEP 2012

1426 Downloads

Lavadora extractora TSL-200 Braun, hospedada en pared, de paso a travez para uso hospitalario, para barrera sanitaria, para cuartos libres de contaminacion,  conexiones listas para vapor, agua fria y agua caliente, 90-105 kilogramos de capacidad

(Washer extractor TSL-200 Braun, hosted wall pass-travez for hospital use, for sanitary barrier for rooms free of contamination, lists connections for steam, hot water and cold water, capacity 90-105 kg ) 

Product Version: Revit MEP 2013

3844 Downloads

In wall washer water/drain connection

Product Version: Revit MEP 2014

1523 Downloads

The BEECO Friendly Double Check Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, CSA B64.5 and IAPMO listed.

No Rating

Product Version: Unknown

236 Downloads

Series ISCA-101-L/R Industry Standard single horizontal adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Unknown

120 Downloads

Watts ISCA-101-L/R-T Industry Standard single horizontal tapered thread water closet carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron threaded faceplate assembly, epoxy coated cast iron foot supports with incremental measurements embossed onto legs to easily adjust height of carrier to most commonly used fixture requirements. Adjustable for standard and wheelchair height, threaded ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load.

No Rating

Product Version: Revit MEP 2014

71 Downloads

The BEECOFriendly Double Check Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, CSA B64.5 and IAPMO listed. Certified lead free devices.

No Rating

Product Version: Unknown

325 Downloads

The BEECO Friendly Reduced Pressure Zone Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1013. Is Certified to cUPC and IAPMO listed.

No Rating

Product Version: Unknown

160 Downloads

Series LF601 & LF601S Lead Free* cast copper silicon alloy Maxi-Flo Check Valves are used to prevent the effects of water hammer in the piping system. They feature a Lead Free* copper silicon alloy body, Viton disc, and integral copper silicon alloy seat. They have a low pressure drop and can be installed in a horizontal or vertical position. Model LF601 is available in sizes 1/4 to 1/2 in. (8 to 15mm) with threaded connections. Model LF601S is available in sizes 1/2 to 1 in. (15 to 25mm) with solder connections. Maximum Pressure: 250psi (17.24 bar) WOG non-shock @ 100°F (38°C).

No Rating

Product Version: Revit MEP 2014

117 Downloads

Watts ISCA-101-D-T Industry Standard back-to-back horizontal tapered thread water closet carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron threaded faceplate assembly, epoxy coated cast iron foot supports with incremental measurements embossed onto legs to easily adjust height of carrier to most commonly used fixture requirements. Adjustable for standard and wheelchair height, threaded ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load.

No Rating

Product Version: Revit MEP 2014

72 Downloads

brick placed in a slanting way especiallyon top of compound walls and first floor slab edges(where there are no sunshades) so that rain water will not flow through the walls

Product Version: Unknown

1182 Downloads

nohs, surf, stained glass window, art, water, moon, surfer, surfing, blue, green, purple, surfboard, wave, waves

Product Version: Unknown

9399 Downloads

Soda or seltzer water dispenser - generic model meant to be mounted on wall or other backing.

No Rating

Product Version: Revit Architecture 2011

1966 Downloads

Series LF26A Lead Free* Small Pressure Regulators are used in small general purpose applications to regulate pressure in piping systems using water and No. 2 fuel oil. They have a Lead Free* brass body construction with NPT threaded female inlet and outlet connections, 1/4 in. two-way low-pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, reinforced Buna-N diaphragm, and tee handle adjustment. Options include Viton trim and slotted adjusting screw. Strainers are recommended. Series LF26A has an oversized orifice and is ideal for use on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. Maximum Working Pressure: 300psi (21 bar).

No Rating

Product Version: Revit MEP 2014

158 Downloads

Series LF263A Lead Free* Small Pressure Regulators are used in small general purpose applications to regulate pressure in piping systems using water and No. 2 fuel oil. They have a Lead Free* brass body construction with NPT threaded female inlet and outlet connections, 1/4 in. three-way low-pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, reinforced Buna-N diaphragm, and tee handle adjustment. Options include Viton trim and slotted adjusting screw. Strainers are recommended. Series LF263A has an oversized orifice and is ideal for use on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. Maximum Working Pressure: 300psi (21 bar).

No Rating

Product Version: Revit MEP 2014

112 Downloads

Series ISCA-141 Industry Standard single vertical thin wall water closet carrier with epoxy coated cast iron fitting, no hub waste and vent connection (specify size) epoxy coated cast iron compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

57 Downloads

Plastic Pitcher for fetch water from pipe, River, Pond etc...

Size : Width 340 mm X Height 360 mm

Comments always welcomed.

Product Version: Revit Architecture 2014

2444 Downloads

Weida(Malaysia) HDPE water tank with type selector from 0.45m3 to 68m3 capacity.

No Rating

Product Version: Unknown

1379 Downloads

Parametric Termic Sun Panels, water tank, degree elevation, ecc..

Product Version: Unknown

2221 Downloads

Series LF530C Lead Free* Calibrated Pressure Relief Valves are used in commercial, residential, and industrial applications to protect against excessive pressure in systems containing water, oil, or air. They have a Lead Free* brass body construction with NPT threaded male inlet and NPT threaded female (drain) outlet connections, stainless steel spring, brass bonnet, Buna-N disc, and Buna-N O-ring. Series LF530C has a calibrated adjustment feature for setting the valve to the required relief pressure, and is ideal for by-pass thermal expansion pressure relief (not ASME approved). Maximum Pressure: 300psi (20.67 bar). Adjustable Pressure Ranges: Sizes 1/2, 3/4 in. - 50 to 175psi (3.45 to 12.06 bar); Size 3/4 in. - 100 to 300psi (6.89 to 20.67 bar).

No Rating

Product Version: Revit MEP 2014

234 Downloads

The Sphere of Water

Product Version: Revit Architecture 2015

2608 Downloads