A parametric water boiler from Heliotek (Bosch), models MK(P) 200, 300, 400, 500 and 600(Lts). For use with solar thermal collectors. Also has a electricl conector for a 2500W internal electrical resistance heating.

Modeled by dufbp, made by Bosch.

Country: Brazil

Product Version: Revit Architecture 2017

4971 Downloads

Parametric Water Tank with Parametric water inside. I tried to work out the water and tank volume calculations but gave up when I relaized that I and Revit can't do math very well

No Rating

Product Version: Revit Architecture 2011

11816 Downloads

This is a basic water fountain I created. Overall diameter is 20'-0". Top of water is just under 12'-0".

The water is one material and the base is one material. You can control their appearance under "Materials."

Product Version: Revit Architecture 2015

19322 Downloads

Separated this element from a fountain found in this library, useful to put it on top of any water fountain base... 

Product Version: Unknown

7803 Downloads

Water Table with a picnic like design. Designed for Preschool and under, indoor or outdoor.

Can be used for water or sand

No cover included

Credit to whoever made this originally

Product Version: Unknown

10735 Downloads

Water tanks - Australasia - So many shapes and sizes. The few here are just a few used here.

No Rating

Product Version: Revit Architecture 2014

1306 Downloads

based on the STEP 2 childrens toy. on off toggle for sand or water, complete with Sand toys and boats on water

Product Version: Revit Architecture 2015

1293 Downloads

This is my first try at it... but it got the job done which is to have a family to connecto to from a single cold water line under sink to hot water service line 1/2" diameter.

Product Version: Revit Structure 2011

15386 Downloads

Water meter as used by utility network operators, Drainlayers and Plumbers in NZ when connecting potable cold water reticulation to residential and small commerical and industrial  buildings for new build work, refurbishment and as the local regulations change to require water meters in more local government jurisdictions.

Manufactured by Arthur D Riley of NZ, this WTD-DRA70 water meter has the "extra tall manifold" (in ground case)

Revit face based model.

Can easily be hosted on Building Pad with a small area in the topography

CBI (NZ) Liquid 71-21 for cold potable water reticulation systems.

Materials include copper for supply in/out, water meter lid (green plastic) and water meter case (generic ABS plastic).

MEP connections for supply In/OUT  (25 mm).

Revit 2018

No Rating

Product Version: Unknown

1639 Downloads

It has 2 inlets for hot and cold water, and 1 outlet for mixed water.

It is en Revit 2023

No Rating

Product Version: Revit Architecture 2020

28 Downloads

Water fountain with water coming out

Product Version: Revit Architecture 2009

11126 Downloads

Hello, being frusterated trying to find a simple water jug, I just made one up super quick and am uploading for anyone who is looking for the same. 

Parametric with basic materials/ water. 

Very basic, you can alter to suit your tastes. 

No Rating

Product Version: Revit Architecture 2018

1040 Downloads

This is a plastic 20 oz water bottle.

Clear plastic with water inside.

White cap. No label.

Product Version: Revit Architecture 2011

17373 Downloads

This is a Generic Wall based supply Water Valve I made for toilets and sink water supply.

Product Version: Revit Architecture 2012

5627 Downloads

very comfy water bed that lightly accents really any color scheme

Product Version: Revit Architecture 2012

5376 Downloads

Single prop plane with water landing floats

No Rating

Product Version: Revit Building 5.1

4634 Downloads

Series LF123LP Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 200psi (13.8 bar) and may be adjusted from 10 - 30psi (69 - 207 kPa). The standard setting is 30psi (207 kPa). All parts are quickly and easily serviceable without removing the valve from the line. The LF123LP features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

250 Downloads

Wellington City Council water Toby.

Street - in ground footpath mounted,   old style cast steel manifold/case and hinged lid ,  which contains the below ground mains pressure (town supply/Utility reticulation) cold potable water supply Valve,  to Residential, light commerical and light industrial properties.

Utility Network operator Toby case only - Wellington Water.

CBI (NZ) Liquid 71-21 - cold potable water reticulation systems.

Material for case and lid.

Generic  model,   no MEP connections.

Revit 2018

No Rating

Product Version: Unknown

427 Downloads

Series LF560 Mini Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is ideal where a small, economical package is required such as on special industrial process applications, miscellaneous plumbing applications, and OEM equipment. Series LF560 is suitable for water supply pressures up to 300psi (21 bar). The LF560 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

128 Downloads

This is a typical water cooler. It is not a 3-D model but has all pertinent views (elevation, section, plan)

Product Version: Revit Architecture 2009

1659 Downloads

Series LFN45B-L Lead Free* Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Available with double union threaded or solder end connections. Standard pressure setting is 50psi with an adjustable range of 25 ‒ 75psi (172 ‒ 517 kPa).

No Rating

Product Version: Revit MEP 2014

404 Downloads

A simple hand powered water pump. Energy efficient.

Product Version: Unknown

3956 Downloads

Series LFN250 Iron Body Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 250psi (17.2 bar) and may be adjusted from 25 - 75psi(172 - 517 kPa). The standard setting is 50psi (345 kPa). All parts are quickly and easily serviceable without removing the valve from the line. The optional bypass feature permits the flow of water back through the valve into the main when pressures, due to thermal expansion on the outlet side of the valve, exceed the pressure in the main supply. The LFN250 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

328 Downloads

Here is a water slide that I designed from this company:

http://www.naturalstructures.com/aquatics_water_over20.shtml

Hope you enjoy!

Product Version: Revit Architecture 2018

4392 Downloads

Galvanized s-profile steel sheeting water tank

No Rating

Product Version: Unknown

9001 Downloads

this is a park style water foutain that has a pet dish as well for small animals

No Rating

Product Version: Revit Building 9

6338 Downloads

Revit 2018 Water Heater Stand_parametric

No Rating

Product Version: Unknown

774 Downloads

Filtrine Model ES-2-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-100' via recirculating drinking water loop. (2) Gal. storage tank. Serves a population of (100), (assuming 1 qt./day/person typical usage).

Product Version: Revit Architecture 2012

1429 Downloads

Filtrine Model ES-4-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-200' via recirculating drinking water loop. (4) Gal. storage tank. Serves a population of (200), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

725 Downloads

Filtrine Model ES-6-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (6) Gal. storage tank. Serves a population of (300), (assuming 1 qt./day/person typical usage).

Product Version: Revit Architecture 2012

1136 Downloads