|
|
Search Downloads
Search Results
 |
MIFAB Series MC-10D-EXT double, horizontal, adjustable high rough-in water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste, 2" (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts. |
No Rating |
Product Version: Unknown
42 Downloads
|
|
 |
MIFAB® Series MC-62 floor mounted service sink carrier with two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet, and lacquered cast iron fitting with no hub waste and vent connection (specify size of each). Complete with lacquered cast iron faceplate assembly, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors and polished chrome plated finishing cap nuts. |
No Rating |
Product Version: Unknown
52 Downloads
|
|
|
 |
MIFAB® Series MC-12 single, vertical, adjustable, water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
39 Downloads
|
|
|
 |
Series ISCA-102-D Industry Standard back-to-back horizontal adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements. |
No Rating |
Product Version: Revit MEP 2014
64 Downloads
|
|
|
 |
Series ISCA-122-D Industry Standard back-to-back vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements. |
No Rating |
Product Version: Revit MEP 2014
45 Downloads
|
|
|
 |
MIFAB® Series MC-15D double, vertical, fixed water closet carrier with offset lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts. |
No Rating |
Product Version: Unknown
34 Downloads
|
|
|
 |
Series ISCA-132-L/R/2 Industry Standard single vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, 4 in. (102mm) no hub side inlet(s), epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements. |
No Rating |
Product Version: Revit MEP 2014
37 Downloads
|
|
|
 |
Series ISCA-132-D Industry Standard back-to-back vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, 4 in. (102mm) no hub side inlet(s), epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements. |
No Rating |
Product Version: Revit MEP 2014
50 Downloads
|
|
|
 |
MIFAB® Series MC-10-EXT (Specify L for left or R for right design) single, horizontal, adjustable, high rough-in water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support |
No Rating |
Product Version: Unknown
21 Downloads
|
|
|
 |
MIFAB® Series MC-13D-HS double, vertical, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, left, right or both (specify) 4” (102) side inlets, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts. |
No Rating |
Product Version: Unknown
16 Downloads
|
|
|
 |
MIFAB® Series MC-10-HDX, 1000 lb. Carrier Support complies with all applicable requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) load.
This support is used in concert with the standard lacquered cast iron adjustable faceplate, lacquered cast iron waste fitting, adjustable ABS nipple, hardware and finishing kit. |
No Rating |
Product Version: Unknown
49 Downloads
|
|
|
 |
MIFAB® Series MC-10-27-37 (Specify L for left or R for right design) single, horizontal, adjustable, water closet carrier with lacquered, 37” (940) long barrel cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, 2” (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
17 Downloads
|
|
|
 |
MIFAB® Series MI-O-HU ____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). Unit comes complete with integral holding tank for additional waste oil storage. |
No Rating |
Product Version: Unknown
219 Downloads
|
|
|
 |
MIFAB® Series MC-15 single, vertical, fixed, water closet carrier with offset lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
13 Downloads
|
|
|
 |
MIFAB® Series MC-10 (Specify -L for left or -R for right design) single, horizontal, adjustable, water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear
anchor tie down support. |
No Rating |
Product Version: Unknown
51 Downloads
|
|
|
 |
SERGIO Urbane 1/2 Bowl Only
Overall Measurements: 220x450mm
Bowl Size: 170x400x140mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with:Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
633 Downloads
|
|
|
 |
SERGIO Urbane 1/2 Bowl #2 Only
Overall Measurements: 250x450mm
Bowl Size: 200x400x140mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
544 Downloads
|
|
|
 |
SERGIO Urbane 3/4 Bowl Only
Overall Measurements: 290x450mm
Bowl Size: 340x400x200mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
1074 Downloads
|
|
|
 |
SERGIO Urbane Extra Large Bowl Only
Overall Measurements: 750x450mm
Bowl Size: 700x400x200mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
1480 Downloads
|
|
|
 |
SERGIO Urbane Standard Bowl Only
Overall Measurements: 450x450mm
Bowl Size: 400x400x200mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
861 Downloads
|
|
|
 |
SERGIO Urbane Large Bowl #2 Only
Overall Measurements: 500x450mm
Bowl Size: 450x400x200mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
676 Downloads
|
|
|
 |
SERGIO Urbane Large Bowl Only
Overall Measurements: 550x450mm
Bowl Size: 500x400x200mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
810 Downloads
|
|
|
 |
SERGIO Compass Large Bowl
Overall Measurements: 445x445mm
Bowl Size: 395x395x210mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 0.8mm
Internal Bowl Radius: 75mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
1311 Downloads
|
|
|
 |
SERGIO Compass Small Bowl
Overall Measurements: 360x390mm
Bowl Size: 310x340mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 0.8mm
Internal Bowl Radius: 75mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
1372 Downloads
|
|
|
 |
SERGIO Compass Medium Bowl #2
Overall Measurements: 370x450mm
Bowl Size: 320x400x190mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 0.8mm
Internal Bowl Radius: 75mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
968 Downloads
|
|
|
 |
SERGIO Compass Medium Bowl
Overall Measurements: 410x445mm
Bowl Size: 360x395x210mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 0.8mm
Internal Bowl Radius: 75mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
964 Downloads
|
|
|
 |
SERGIO Unica 1 1/2 Bowl Only
Overall Measurements: 625x495
Bowl 1: 355x405x180mm
Bowl 2: 155x300x110mm
Material: 304 Grade Stainless Steel
Gauge: 0.8mm
Internal Bowl Radius: -
Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
No Rating |
Product Version: Revit Architecture 2011
1039 Downloads
|
|
|
 |
SERGIO Cameo 1 1/2 Bowl and Drainer
Overall Measurements: 1080x500mm
Bowl 1: 355x405x170mm
Bowl 2: 200x300x150mm
Material: 304 Grade Stainless Steel
Gauge: 0.8mm
Internal Bowl Radius: -
Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
|
Product Version: Revit Architecture 2011
1945 Downloads
|
|
|
 |
SERGIO Ansa Single Bowl and Drainer
Overall Measurements: 780x480mm
Bowl 1: 330x380x170mm
Bowl 2: -
Material: 304 Grade Stainless Steel
Gauge: 0.8mm
Internal Bowl Radius: -
Suppliedwith: Basket Waste and Overflow Kit, Sealing Tape, Fixing Clips
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
|
Product Version: Revit Architecture 2011
8714 Downloads
|
|
|
 |
SERGIO Ansa 1 1/2 Bowl and Drainer
Overall Measurements: 980x480mm
Bowl 1: 330x380x170mm
Bowl 2: 200x300x170mm
Material: 304 Grade Stainless Steel
Gauge: 0.8mm
Internal Bowl Radius: -
Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
No Rating |
Product Version: Revit Architecture 2011
4791 Downloads
|
|
|
|
Site Stats
Members: | 2082797 | Objects: | 23124 | Forum Posts: | 152273 | Job Listings: | 3 |
|
Search