Terracotta Warrior for exterior/interior decoration

No Rating

Product Version: Revit Architecture 2019

257 Downloads

This is a single Terracotta wall cap piece, intended for use in an array along the top of a wall. I made it for a custom project and thought someone else might be able to use it for detailing. It's not parametric, sorry.

Product Version: Unknown

2635 Downloads

You need three families to make spanish roof tiles (tiles, ridge, finial) and we can't upload zip file to revitcity so I share with you this download link where you can download and watch tutorial how to use these families. 

Download Link: https://goo.gl/MZ3ZUq

My Youtube channel: MTH REVIT TUTORIALS

MY Website (where you can download free project files): www.cadneeds.com

Product Version: Revit Architecture 2015

9620 Downloads

model pattern - clay roof tiles

Product Version: Unknown

39465 Downloads

Hi there

Here are two families of the same ‘crested ridge tiles’. One been build using the generic model line base template so you can drag it along the line with to control points but the tiles sometimes over lap, the second family been build using the generic model template and you control it either by the length or by the number of tiles. In both families you can control the angle of the tile and the material.

nirim      

No Rating

Product Version: Revit Architecture 2011

4412 Downloads

Tejas como elemento de Curtain Wall PanelRoof tiles (Curtain Wall Panel)

Para mas informacion vean el video en youtube.com

For more info check the video in youtube.com:

http://www.youtube.com/watch?v=QANslR6NukU

comentarios u otros tutoriales ke deseen ke ponga manden un email (comments or tutorial about revit sendme a email)  gracias/ Thanks

Product Version: Revit Building 9.1

15519 Downloads

Product Version: Unknown

21487 Downloads

Product Version: Unknown

11211 Downloads

Product Version: Unknown

13424 Downloads

A simple ridge tile for use on roofs.  Pick the line and sweep along to create the ridge.

No Rating

Product Version: Revit Architecture 2015

1119 Downloads

This is for anyone looking for a more realistic tiled roof. Array horizontal model lines up the face of your roof at a spacing of 18", select peak_valley, gable, valley_valley, etc depending on what type of face it is, and place the line-based generic model family by line-selection. Height of tile is adjustable (good for fitting in last row). Made for a 5/12 slope, but will probably work with others. Also included is the jpeg for the material I used. Renders beautifully.

Product Version: Unknown

25287 Downloads

Roof steps are a simple way to creat an access route, for example, up to a chimney. They may be used on roofs of up to a 4-meter access height with a pitch of a 45 degrees.

They are installed in a straight line one over the other are finished off with anchoring device for personal fall protection, for example , a rdige rail.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

464 Downloads

This is for anyone looking for a more realistic tiled roof. Array horizontal model lines up the face of your roof at a spacing of 18", select peak_valley, gable, valley_valley, etc depending on what type of face it is, and place the line-based generic model family by line-selection. Height of tile is adjustable (good for fitting in last row). Made for a 5/12 slope, but will probably work with others. Renders beautifully.

No Rating

Product Version: Unknown

1955 Downloads

This is a simple raised computer floor system which works. (Floor based family!)

Few things: it's only square and it doesn't end with whole or half tiles. But that's just my choice, edit it if you like.

Good luck!

Product Version: Revit Architecture 2011

8931 Downloads

For all those who place tiles on wall i'm sure u know how much of a hassle it is. Guys check this tile family out.......PARAMETRIC ROWS,COLUMNS, MATERIALS, TILE DIMENSIONS etc....err what more can I possibly say. Face based family

Please give ur feed back.

Product Version: Revit Architecture 2011

4628 Downloads

Floor-based indoor swimming pool. Rectangular minus one corner, not parametric in any way, made from mixed colour cerami tiles and pre-filled with water. Still learning, but hopefully someone can use it.

Product Version: Revit Architecture 2009

38256 Downloads