 |
Different types of screws for architectural and structural detailing. Rubber, hex head, self drilling. Plastic dowel is optional. |

|
Product Version: Revit Architecture 2018
5692 Downloads
|
|
 |
UOT - Kamel - Door - Movable solid aluminum plate fixed with screws ... Building and Construction Engineering Department ... University of Technology ... Baghdad, Iraq ... |
No Rating |
Product Version: Revit Architecture 2013
396 Downloads
|
|
 |
Here is a pergola that is modeled after the details provided by Simpson Strong Tie. All components are nested families and every aspect is parametric. All hardware is shown except for screws and bolts. |

|
Product Version: Revit Architecture 2018
13488 Downloads
|
|
 |
Exterior gutter scupper with downspout with iron braces, I update the model because they lacked the screws to it, it's 100% parametric with lots of dimensions and parameters, if you see anything wrong give me a email and i fix it... |

|
Product Version: Revit Architecture 2009
14976 Downloads
|
|
 |
Detail Component that contains a Pan Head Screw. This object contains #8 & #10 Screws of different lengths in 1/2" increments up to 3". Contains 5 nested families; automatically calculates number of threads required for each length. Threads appear at "Fine" detail level. |

|
Product Version: Revit Architecture 2009
14532 Downloads
|
|
 |
This family will automatically generate the right length desk for the number of seats required. Seats are set @ 30" apart. Width of the desk cannot be changed dynamically as it screws up the chair array. If you find a way to fix the chair array please upload a modified family. |

|
Product Version: Unknown
17126 Downloads
|
|
 |
Series CO-410 epoxy coated cast iron floor access housing with scoriated heavy duty ductile iron top and securing thumb screws. |
No Rating |
Product Version: Revit MEP 2014
70 Downloads
|
|
 |
MIFAB® C1300-____ (select model number): C1300-R for round scoriated, C1300-S for square scoriated access cover with frame (specify material) anchor lugs and vandal resistant stainless steel allen key screws. |
No Rating |
Product Version: Unknown
330 Downloads
|
|
 |
Aviator wing desk as seen on www.restaurationhardware.com
"Inspired by streamlined World War II fighter planes, our desk is a shining swoop of metal, its shape mimicking the bent wing of a plane. Poised as if for take-off, it features a polished aluminum patchwork exterior accented with steel screws, built around a solid hardwood frame. 3 canvas-lined shelves offer ample storage."
Revit 2012 |

|
Product Version: Unknown
9553 Downloads
|
|
 |
Series FD-670 PVC area drain with anchor flange, weepholes, 10-1/8 in. diameter fixed top, heel proof PVC grate secured with vandal proof stainless steel screws, and socket outlet. |
No Rating |
Product Version: Revit MEP 2014
156 Downloads
|
|
 |
Series FD-670 PVC area drain with anchor flange, weepholes, 10-1/8 in. diameter fixed top, heel proof PVC grate secured with vandal proof stainless steel screws, and socket outlet. |
No Rating |
Product Version: Revit MEP 2014
89 Downloads
|
|
 |
Series FD-660 PVC area drain with anchor flange, weepholes, 7-3/4 in. (197mm) diameter fixed top, heel proof PVC grate secured with vandal proof stainless steel screws, and socket outlet. |
No Rating |
Product Version: Revit MEP 2014
112 Downloads
|
|
 |
Series FD-1160 chemical resistant PVC floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, 6-1/2 in. (165mm) round heel proof adjustable PVC strainer secured with stainless steel screws, and socket outlet |
No Rating |
Product Version: Revit MEP 2014
130 Downloads
|
|
 |
MIFAB® Series F1240 lacquered ductile iron area drain with ½” (13) thick, 6 ½” (165) diameter heavy duty ductile iron grate with stainless steel screws. Recommended for use in vehicular traffic areas. |
No Rating |
Product Version: Unknown
843 Downloads
|
|
 |
The Extensive range of Lynx Ottoman and Bench collection seating with contemporary linear lines yet featuring all the safety features required for challenging environments. Reinforced frame with plywood skinning where possible, including plywood under bottom. Anti-tamper security fixings including use of non-retractable screws and no visible staples.
Constructed using fire retardant CMHR foams and Chromed metal legs.
(Created in Revit (2014) |
No Rating |
Product Version: Unknown
20284 Downloads
|
|
 |
*Medical Chart Holder* Parameters: Chart Holder Color - Folder Color - Folder Tag Color - Screws |
No Rating |
Product Version: Unknown
1996 Downloads
|
|
 |
Series WCA-411/WCA-411-WC floor mounted concealed arm lavatory carrier with heavy gauge steel uprights with integral welded feet, adjustable epoxy coated cast iron arms with leveling screws and basin locking device, upper tie rod, and plated hardware. |
No Rating |
Product Version: Revit MEP 2014
53 Downloads
|
|
 |
MIFAB® Series F1650 flushing rim floor drain with white epoxy coated interior and exterior cast iron body, 3/4” (19) N.P.T. flushing connection, anchor flange, membrane clamp, and stain finished (specify material finish) grate and frame with stainless steel allen key vandal proof screws. |
No Rating |
Product Version: Unknown
28 Downloads
|
|
 |
MIFAB® Series F1650 flushing rim floor drain with white epoxy coated interior and exterior cast iron body, 3/4” (19) N.P.T. flushing connection, anchor flange, membrane clamp, and stain finished (specify material finish) grate and frame with stainless steel allen key vandal proof screws. |
No Rating |
Product Version: Unknown
26 Downloads
|
|
 |
MIFAB® F1100-C Series lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard satin finished nickel bronze strainer with vandal resistant stainless steel all on key screws (For non-membrane floors, delete -C from Series number). |
No Rating |
Product Version: Unknown
198 Downloads
|
|
 |
Series CA-461 wall mounted concealed arm lavatory carrier with adjustable epoxy coated cast iron wall plate, steel back-up plate, adjustable epoxy coated cast iron arms with leveling screws and basin locking device, and plated hardware. |
No Rating |
Product Version: Revit MEP 2014
64 Downloads
|
|
 |
MIFAB® Series F1160 Prison Cell floor drain with lacquered cast iron body and anchor flange, weepholes, 3” or 4” no hub side outlet, integral deep seal trap with cleanout plug and adjustable (specify material finish) strainer with T-20 torx and pin security screws. (For membrane floors, use MIFAB F1160-C Series.) |
No Rating |
Product Version: Unknown
274 Downloads
|
|
 |
MIFAB® Series F1100-AS-1 lacquered cast iron floor drain with anchor flange, weepholes, and “AS” angle satin finished nickel bronze strainer with vandal resistant stainless steel allen key screws. (For non-membrane floors, use MIFAB® F1100-AS Series.) |
No Rating |
Product Version: Unknown
255 Downloads
|
|
 |
Series WCA-411-D/WCA-411-D-WC back-to-back floor mounted concealed arm lavatory carrier with heavy gauge steel offset uprights with integral welded feet, adjustable epoxy coated cast iron arms with leveling screws and basin locking device, upper tie rod, and plated hardware. |
No Rating |
Product Version: Revit MEP 2014
21 Downloads
|
|
 |
POOL SPOT
Art. S.3693 12 MODULES LED RGBW (W=6000K) 24VdcRated luminaire luminous flux: 430lmRated input power: 31WLuminaire efficacy: 14lm/WRequires remote ON-OFF power supply or Dimmable power supply CELUMINAIRE TYPESubmersion luminaire. IP rating IP 68MATERIAL CHARACTERISTICSTalc-filled technopolymer housing. Marine grade stainless steel AISI 316L front trim 2 mm thick. A4 grade Stainless Steel screws with 2,5-3% molybdenum content whitch increases the resistance against corrosion. Toughened transparent glass 4mm thick for MICROPOOL SPOT, 8mm MINIPOOL SPOT and POOL SPOT. Mechanical resistance IK 10 Silicone gaskets.LIGHTING PERFORMANCEThe spectral distribution of the light is intended to change the appearance of the scene or object lit. Not intended for use in other applications. Lamp fixed position. LOR -- WIRINGPOOL SPOT requires a FLANGE accessory to anchor the fitting to the bottom of pools or fountains. The stainless steel flange is supplied with fastening screws, both for fixing the fitting to the flange and for the anchorage to the bottom of the pool. Should the fixation with screws be impossible, the weight of the accessory still allows to keep the luminaire sitting on the bottom of the pool. Single cable entry with M20 brass cable gland. Luminaire hard wired with 6 m. cable (5 x 1mm²) cable type H07RN8-F for MICROPOOL RGBW, 6 m. cable (5 x 1mm²) cable type H07RN8-F for MINIPOOL RGBW and 8 m. cable (5 x 1mm²) cable type H07RN8-F for POOL RGBW closed by cable gland and sealed with B component epoxy resin, wired internally protected by silicon sheaths Isolation: CLASS III . Available colours: Stainless steel (cod.19). Weight: 4.48 Kg LED circuit included. Not suitable to install outside the water.The luminaire cannot be installed out of the water. Not compatible with pools containing salt water and that are treated with salt water chlorinationPOOL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2018
1008 Downloads
|
|
 |
MIFAB Series C1440-S (select model number with required plug pipe size) expandable line cleanout plug with tapping and 7” x 7” square, smooth nickel bronze access panel with allen key screws and anchor frame with mounting lugs. |
No Rating |
Product Version: Unknown
62 Downloads
|
|
 |
MIFAB Series C1450-S (select model number with required plug pipe size) line cleanout plug with blind tapping and 7” x 7” square, smooth nickel bronze access panel with allen key screws and anchor frame with mounting lugs. |
No Rating |
Product Version: Unknown
77 Downloads
|
|
 |
Series TCA-440 epoxy coated wall mounted concealed arm track lavatory carrier come with heavy gauge steel cross plate and back-up mounting plates, sliding adjustable arm brackets, adjustable epoxy coated cast iron arms with leveling screws and basin locking device and plated hardware. |
No Rating |
Product Version: Revit MEP 2014
52 Downloads
|
|
 |
Series TCA-450 epoxy coated wall mounted concealed arm track lavatory carrier for 27x20 lavatories come with heavy gauge steel cross plate and back-up mounting plates, sliding adjustable arm brackets, adjustable epoxy coated cast iron arms with leveling screws and basin locking device and plated hardware. |
No Rating |
Product Version: Revit MEP 2014
50 Downloads
|
|
 |
Series TCA-411 epoxy coated floor mounted concealed arm track lavatory carrier with heavy gauge steel offset uprights with welded feet, steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device. |
No Rating |
Product Version: Revit MEP 2014
87 Downloads
|
|