1140 x 1180mm centre-pivot roof window with flashing and blind set in generic 300mm roof.

This Revit family is now superseded.

Please visit www.velux.co.uk for latest BIM information

Product Version: Revit Architecture 2008

7352 Downloads

Basic 1140 x 1180mm centre-pivot roof window with flashing and blind set in generic 300mm roof.

This Revit family is now superseded.

Please visit www.velux.co.uk for latest BIM information

Product Version: Revit Architecture 2008

9661 Downloads

The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet.

No Rating

Product Version: Revit Architecture 2019

242 Downloads

This is release 1 of a roof drain. If you like it feel free to make it better and upload it. But someone had to get this block started.

Product Version: Unknown

3668 Downloads

This is a set of rafters for a gable roof with symmetrical span but differing overhang lengths. It is for a two-cut plumb roof.

Product Version: Unknown

2688 Downloads

This is for anyone looking for a more realistic tiled roof. Array horizontal model lines up the face of your roof at a spacing of 18", select peak_valley, gable, valley_valley, etc depending on what type of face it is, and place the line-based generic model family by line-selection. Height of tile is adjustable (good for fitting in last row). Made for a 5/12 slope, but will probably work with others. Also included is the jpeg for the material I used. Renders beautifully.

Product Version: Unknown

25460 Downloads

The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet.

No Rating

Product Version: Revit Architecture 2019

125 Downloads

Based on Woodford Y2 roof hydrant. Has cw & san connectors, ht parametric

No Rating

Product Version: Unknown

1060 Downloads

Portal frame roof ventilation. Parametric Length.

No Rating

Product Version: Revit Architecture 2013

3218 Downloads

Modified an existing roof vent model for this pretty common type seen on old houses.

No Rating

Product Version: Revit Architecture 2018

2816 Downloads

Roof Drain - General 3D form of strainer and receiver

Product Version: Unknown

11551 Downloads

Rail (0.5 m height) at the access hatch and around skylights etc. from supports when ascending/descending to the roof and shall prevent people from going onto roof areas that cannot withstand the weight of a person.

They are also approved for the anchoring of personal fall protection according to SS 831333.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

554 Downloads

Reference Model: Custom metal profile ladders for roof access.

Parametric materials, dimensions and parts visibility.

Made entirely with Revit tools.

Product Version: Revit Architecture 2019

2907 Downloads

Generic base component. Not parametric.  Model includes a 12" roof curb.  

No Rating

Product Version: Revit Structure 2018

1992 Downloads

This a combination of kkerridge roof drain & kshahan roof drain layout.

Parametric

By Juul

Product Version: Revit Architecture 2009

5617 Downloads

The JUAL Vapour Barrier Roof Outlet is a vertical roof outlet which is installed in the vapour barrier below the insulation. The bottom part of the outlet fits into a standard downpipe. The upper part of the outlet pipe is wider and has a lip seal. It works as a watertight socket for a standard roof outlet which is installed at the roof surface.The vapour barrier roof outlet is available in one length and in various standard diameters.

No Rating

Product Version: Revit Architecture 2019

109 Downloads

This is a set of roof rafters with adjustable spans on either end. It is for a two-cut plumb roof.

No Rating

Product Version: Unknown

2560 Downloads

This is a Church Roof Spire. It is a Generic Model made from extruded objects and sweeps. It's about +/-25'-10" tall and about +/-4'-9" wide at the base.

Product Version: Revit Architecture 2012

3135 Downloads

Butler Pre-Engineered Metal Building MR-24 Standing Seam Roof Panel Adj Length.

Product Version: Unknown

8059 Downloads

This vent can replace the ugly dormer vents used on the roof.

This is a face based family.   enjoy!

Product Version: Revit Architecture 2015

2495 Downloads

drafting pattern - ar-rroof roof shingles

Product Version: Unknown

5201 Downloads

Parametric Domed Roof Light Fsmily Type

Product Version: Revit Architecture 2009

13908 Downloads

This roof top Finial is a Generic Model made with simple extrusions and sweep... Very generic, you will need to mirror the W-E in the Right view in order to read correctly... oops!

Ok I've Updated and corrected the problem... should be good now!

No Rating

Product Version: Revit Architecture 2014

2407 Downloads

No Rating

Product Version: Revit Architecture 2019

55 Downloads

Parametric Single Run Alternating Tread Stair terminating at roof hatch based on Lapeyre Stair Products.

No Rating

Product Version: Revit Architecture 2010

8922 Downloads

Wall hosted chain support for holding up your roof or awning or whatever you like. Fully Parametric that automatically adjusts chain length and angle based on a couple parameters that dictate where the supports will be.

No Rating

Product Version: Revit Architecture 2013

5598 Downloads

This is a Parametric Finial (Roof Gable Decoration)

Parametric in Material Finish and Length

No Rating

Product Version: Revit Architecture 2014

2619 Downloads

Curved metal roof, edit be front elevation and radius profile.

No Rating

Product Version: Revit Architecture 2020

259 Downloads

Curved metal roof, edit be front elevation and radius profile.

No Rating

Product Version: Revit Architecture 2020

141 Downloads

Car parking roof tent in fabric finish for 2 cars slot on 1 column support

Product Version: Revit Architecture 2018

5970 Downloads