Facade ladder for evacuation, ascending to the roof and chimney.

Installed with a bracket depending on the depth of the roof foot. Handrails shall be installed with a bracing kit on facade ladders and on roofs or other permanently installed access device.

Satisfies the requirements set out in SS 831340

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

720 Downloads

Snow fence tube protects your inhabitants from falling snow during the melting season.

 The snow fence satisfies SS 831335

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

1843 Downloads

assign it a rainfall rate, and total surface area (has ability to include vertical surfaces as well)

It will size the pipe dia based on michigan plumbing code

-can be adapted for other states, based on Wade

Based on 1% slope I intend to include rates based on 2% slope at a later date

Product Version: Revit MEP 2009

14204 Downloads

This is a soffit box profile to be used as a Roof Fascia Sweep (use the bottom edge).  Used to finish of the gable end of simple roofs.   You will need to join the sweep to the roof and then use the invisible linework tool to make the box look as one solid surface.  Has parameters for the slope and the overhang. Thanks to dano3d for the slope formula.

Product Version: Revit Architecture 2009

2558 Downloads

Adjustable Radius, Height, Border Wall Height, and Materials

Product Version: Revit Architecture 2011

738 Downloads

Snow fence profile protects your inhabitants from falling snow during the melting season.

 The snow fence satisfies SS 831335

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

906 Downloads

The height, radius, start angle, end angle, border wall height, and materials are adjustable. Adjusting the start and end angles can make the dome a full dome, half dome, quarter dome, etc.

Product Version: Revit Architecture 2011

13514 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

76 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

35 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

58 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

40 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

31 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

74 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

40 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

Product Version: Revit Architecture 2019

40 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

29 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

Product Version: Revit Architecture 2019

64 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

24 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

20 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

14 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

12 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

21 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

16 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

14 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

29 Downloads

Pitched Roof 4kWp Photovoltaic Panel

4kWp 16 250Wp Panels

For More info contact:

info@evoenergy.co.uk

EvoEnergy Ltd

Product Version: Revit Architecture 2014

10453 Downloads

Roof window

No Rating

Product Version: Revit Architecture 2010

1688 Downloads

MIFAB® Series R1200-RS lacquered cast iron deep sump roof drain with 15” diameter anchor flange, 2” high cast iron external combined water dam and waterproofing membrane clamp ring, and internal dome strainer.

No Rating

Product Version: Unknown

25 Downloads

roof and gate can be opened & shut

No Rating

Product Version: Revit Architecture 2010

5923 Downloads

The function of the anchor loops and ridge rail is to rofm an anchor point for personal fall protection. The ridge rail is used on pitched roofs; on low-pitched roofs (pitches of less than 6 degrees) with asphalt or artificial material-based sealing surfaces, anchor loops are used.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

374 Downloads