 |
This is a parametric detail componenet for metal coping on parapet walls. Wall width and depth of coping are adjustable. Really came in handy on a project with mulitple parapet widths. Hope it works for you. |
No Rating |
Product Version: Revit Architecture 2012
5883 Downloads
|
|
 |
Use wall sweep command. The profile is inteded for wall coping parapet. Customize to your project. |
No Rating |
Product Version: Revit Architecture 2018
2563 Downloads
|
|
|
 |
As a beautiful finish on both the roof and facade, the JUAL ROOFLINE Parapet System is used for buildings with flat roofs. |
No Rating |
Product Version: Revit Architecture 2019
776 Downloads
|
|
|
 |
As a beautiful finish on both the roof and facade, the JUAL ROOFLINE Parapet System is used for buildings with flat roofs. |
No Rating |
Product Version: Unknown
482 Downloads
|
|
|
| |
Same as previous Curtain Wall panel, but usable as parapet panels between floors. Gives the choice of choosing either field or corner panel. Usefull when one wants a structural glazing corner with no mullion. Also, by clearing both types (corner or field panel) gives an empty panel. Angle of junction - parametric. |
No Rating |
Product Version: Revit Architecture 2010
4091 Downloads
|
|
|
 |
Fully adjustable - allows you to enter the height of each side of the parapet. Set top of parapet as your work plane. |
|
Product Version: Unknown
5078 Downloads
|
|
|
 |
Simple Profile created for a sloping metal parapet cap. This profile is meant to be hosted on a wall and works well with the wall sweep tool. It is not parametric though I don't even know if profiles can be. It hosts at about it's midpoint in height so that it partially goes down to cover the top of the wall and extends partially above. It is about 4" high on the exterior face and slopes down 1" to the back side. |
|
Product Version: Revit Architecture 2011
7875 Downloads
|
|
|
 |
Parametric |
No Rating |
Product Version: Revit Architecture 2013
4688 Downloads
|
|
|
 |
|
|
Product Version: Revit Architecture 2015
5309 Downloads
|
|
|
 |
|
No Rating |
Product Version: Revit Architecture 2015
3072 Downloads
|
|
|
 |
AGRV-HRAL_SeriesC-Parapet-Metal & Glass Railing
# Parapet(Short wall) mounted railing
# rail support
We proivde 2 type of Railing in RVT : H120,H150
We also create a Baluster using the railing support familt, so you can place it manully.
Visit our website AgrvArchitect.com for more families
Because the rvt file is too big, so I put the file in here :
https://drive.google.com/file/d/1TIqQGfTZHJhLxvAHKhBZwEPG244N61jc/view?usp=sharing
|
No Rating |
Product Version: Revit Architecture 2018
778 Downloads
|
|
|
 |
ALLPROOF INDUSTRIES 17 Bay Park Pl Beach Haven Auckland, New Zealand +64 (9) 481 8020 UPLOAD TEST TO REVIT CITY / MARCH 2011 |
|
Product Version: Revit Architecture 2011
1077 Downloads
|
|
|
 |
I used this for a sweep on my parapet walls. |
|
Product Version: Revit Architecture 2018
4758 Downloads
|
|
|
 |
Scupper in Sloped Wall - Useful in raked coping solid masses with host wall as back face of parapet |
|
Product Version: Unknown
3724 Downloads
|
|
|
 |
2D isometric detail of expansion joint flashing at a parapet wall per SMACNA. |
No Rating |
Product Version: Unknown
780 Downloads
|
|
|
 |
The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet. |
No Rating |
Product Version: Revit Architecture 2019
221 Downloads
|
|
|
 |
The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet. |
No Rating |
Product Version: Revit Architecture 2019
108 Downloads
|
|
|
Search