 |
BLITZ 4 WINDOWS
Art. S.4089W 1 MODULES COB 3000K 220-240Vac 1867lm 17.4W CRI 90 MacAdam step 3Rated luminaire luminous flux: 303lmRated input power: 18.1WLuminaire efficacy: 17lm/WElectronic ballast ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCELuminaires come with toughened glass lenses already installed using the appropriate "lens-carrier slide". These may be substituted with coloured dichroic lenses. INSTALLATION AND MAINTENANCEA robust, die-cast aluminium cap is secured to the base with four stainless steel screws. WIRINGDouble cable entries with PG13,5 (Ø 7÷12 mm) cable glands. Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.9 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2018
946 Downloads
|
|
 |
Corner. 35" x 35". Finishes should be changeable. |
No Rating |
Product Version: Revit Architecture 2016
10837 Downloads
|
|
 |
Deep end= 12', shallow end= 3.5', and gradual slant inbetween. 54X27 feet |

|
Product Version: Unknown
4857 Downloads
|
|
 |
Distance from ceiling and materials - parametric. |

|
Product Version: Revit Architecture 2013
59199 Downloads
|
|
 |
BLINKER
Art. S.6080W 1 MODULES COB 3000K 220-240Vac 2419lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 567lmRated input power: 23WLuminaire efficacy: 25lm/WElectronic ballast ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 06LIGHTING PERFORMANCEReflector in 99.98% pure anodized aluminium . Acid-etched toughened glass 4 mm thick. LOR -- INSTALLATION AND MAINTENANCEThe recessing box is provided with support ribs that make it crush-proof during installation; the ribs are molded to the recessing box and cannot fall out before installation. The ribs must be removed before the installation of the luminaire. The lamp body is secured to the recessing box through stainless steel clips; the electric components are protected by a covering reflector that houses the light source. WIRINGSingle cable entry . Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.28 Kg Glow Wire test: --LED circuit included.BLINKER REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2018
217 Downloads
|
|
 |
Modeled after sofa from Koverton. Hexagon pattern is void extruded. Cushions not included in family file. |
No Rating |
Product Version: Unknown
12663 Downloads
|
|
 |
This particular light was designed for placement under the cabinets and meant to be an invisible light source when in the kitchen or where ever it may be used. Hope you like it! |

|
Product Version: Unknown
22251 Downloads
|
|
 |
Material for the bulb base |

|
Product Version: Revit MEP 2011
10142 Downloads
|
|
 |
An interpretation of the Madison Bench by The Bench Factory. Parametric length and materials. V2019. |

|
Product Version: Revit Architecture 2018
27224 Downloads
|
|
 |
MINIREEF BOLLARD
Art. S.5240W 1 MODULES COB 3000K 220-240Vac 1740lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1090lmRated input power: 16.8WLuminaire efficacy: 65lm/WPower supply Dimmable DALI 2 / PUSH CELUMINAIRE TYPEBollard fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) and extruded EN AW-6060 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCE99.98% pure anodized aluminium reflector. Polycarbonate lens transparent with controlled downward light emission for avoiding any glare, UV-stabilised and vandalproof . Lamp fixed position . INSTALLATION AND MAINTENANCEGarden mounted fixtures are to be installed and used with the ground stake accessory or cemented root flange. These cannot be installed directly to the ground or cement bases without the relative accessories because the contact between the two different materials may lead to an accelerated process of oxidation of the fixture. WIRINGDouble cable entries with grommets. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), BURNISHED BRONZE (cod.20). Weight: 6.13 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.
|
No Rating |
Product Version: Revit Architecture 2018
418 Downloads
|
|
 |
CATCH SQUARE 4LED
Art. S.7406W 4 MODULES LED 3000K 220-240Vac 620lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 415lmRated input power: 7.8WLuminaire efficacy: 53lm/WElectronic ballast DALI 2 / PUSH CELUMINAIRE TYPEFalse ceiling-recessed down-light fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. Aluminium front trim or Marine grade stainless steel AISI 316L front trim. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 08LIGHTING PERFORMANCEThe led chips are positioned inside specific cowels and are not visible therefore resulting in excellent visual comfort and antiglare characteristics. Toughened transparent glass 5mm thick. Lamp adjustable ±20° position. LOR -- INSTALLATION AND MANTEINANCEThe luminaires are fixed to the falseceiling by a heavy-duty bracket system, adjustable. WIRINGLuminaire hard wired with 0.4m H05RNF cable, supplied with IP67 connector . Isolation: CLASS II . Available colours: Stainless steel (cod.19). Weight: 1.84 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2019
182 Downloads
|
|
 |
Simple hospital bed headwall with lights - None parametric but easily adjustable. |

|
Product Version: Revit Architecture 2013
9569 Downloads
|
|
 |
(The model from autodesk.seek doesn't work....) |

|
Product Version: Revit Architecture 2009
32063 Downloads
|
|
 |
Metal baluster that can be move frome place to place. Non-parametric |
No Rating |
Product Version: Revit Architecture 2013
2155 Downloads
|
|
 |
this is a park style water foutain that has a pet dish as well for small animals |
No Rating |
Product Version: Revit Building 9
6427 Downloads
|
|
 |
I used a grill I found on here and built up stone around it to give it that italin fire pit look I hope everyone likes it. PLEASE COMMENT AND OR RATE!!!! |

|
Product Version: Revit Architecture 2012
14649 Downloads
|
|
 |
Large chandellier light family based on the Sonneman brand 'Constellation Hedron' light fixture.
Based on the Sonneman spec, the geodesic dome form measures 45" in diameter with 40 LED bulbs.
Modeled as a Generic Family. Not face-based or ceiling hosted-- you'll need to set the elevation within your model.
The model DOES include lighting which will illuminate space in rendering programs. The lighting does not utilize the actual IES files-- and is an estimated look using generic Revit lighting fixtures in the estimated locations of the light fixture lighting.
The handing distance is unfortunately not parametric at this time-- I haven't had time to adjust this value. Feel free to make your own updates and share.
For more on the Sonneman fixture, visit https://sonnemanlight.com/constellation-hedron-chandelier |
No Rating |
Product Version: Unknown
2109 Downloads
|
|
 |
Double Chair (Settee). 35" x 70". Finishes should be changeable. |
No Rating |
Product Version: Revit Architecture 2016
12185 Downloads
|
|
 |
Types for 2, 3, 4, 5, & 6 Swivel Chairs |

|
Product Version: Revit Architecture 2019
16765 Downloads
|
|
 |
Simple ceiling lamp created for a small project. ispiration from Vistosi Comó PL. d= 170mm h= 220mm |
No Rating |
Product Version: Revit Architecture 2015
9993 Downloads
|
|
 |
Inspired by Daikin VRV IV REYQT
Parametric 6 to 38 Tons of Refrigeration
Download and adjust .jpg for copper grid texture
Detail level: LOW - MEP level: NO - Annotations: NO |
No Rating |
Product Version: Revit Architecture 2017
954 Downloads
|
|
 |
300 x 300mm Slate Step with 100 x 100mm Frosted Glass at center |
No Rating |
Product Version: Revit Architecture 2013
8783 Downloads
|
|
 |
Revit Family Design using 2019 |
No Rating |
Product Version: Unknown
6224 Downloads
|
|
 |
Round Corner. 35" x 35". Finishes should be changeable. |
No Rating |
Product Version: Revit Architecture 2016
5198 Downloads
|
|
 |
Single Chair. 35" x 35". Finishes should be changeable. |
No Rating |
Product Version: Revit Architecture 2016
10572 Downloads
|
|
 |
Corner Ottoman. 35" x 35". Finishes should be changeable. |

|
Product Version: Revit Architecture 2016
9683 Downloads
|
|
 |
This is a green light cross used in hospitals or medical institutes |
No Rating |
Product Version: Revit Architecture 2019
440 Downloads
|
|
 |
PARK SINGLE POLE H=3500mm
Art. S.7100N20 MODULES LED 4000K 220-240Vac 6000lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 4308lmRated input power: 46WLuminaire efficacy: 94lm/WElectronic ballast ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 65MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp fixed position . LOR -- POLERectangular extruded aluminum pole with inspection door. Steel zinc-plated mounting flange with stainless steel screws.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H07RNF cable. Single cable entry with PG13,5 (Ø 6÷12 mm) cable gland in PMMA. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 36.01 Kg Glow Wire test: -- Exposed windage area : 0,394 m² ( S.7100N ) Exposed windage area : 0,440 m² ( S.7110N )LED circuit included.PARK REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2018
617 Downloads
|
|
 |
Parametric mirror that adjusts both width and height. Material parameters as well, however, you need to make sure the "Light Filter" material is set in your project with self illumination turned on. |

|
Product Version: Revit Architecture 2015
48324 Downloads
|
|
 |
This is a modified version of 'Parametric Track Light w/ Gimble Fixture'. I made so the lights would be centered on the track. |
No Rating |
Product Version: Revit Architecture 2013
12133 Downloads
|
|