This versatile lightning lamp Revit family is designed to brighten both your indoor and outdoor spaces with style and function. Whether you're illuminating your cozy living room or giving your garden a vibrant nighttime glow, this lamp has you covered. With customizable features and an energy-efficient design, it's ready to spark up any corner, day or night!

No Rating

Product Version: Revit Structure 2020

93 Downloads

This is a simple outdoor ceiling based 1' black light box.

No Rating

Product Version: Revit Architecture 2013

4167 Downloads

Track lighting family offers basic rcp sybol and provides correct number of fixtures accordign to track length and light spacing parameters.  Good base to start looking at shared families to pull your own light fixtures into.

No Rating

Product Version: Unknown

9971 Downloads

revit2009 3d_flower indoor/outdoor..

Product Version: Revit Architecture 2009

59714 Downloads

Modern Outdoor 6-seater dining with wood pavilion and barbeque.

Lighted with circular & modern pendant.

Dining chair, table, and bbq stove sourced on revitcity.

Product Version: Unknown

2090 Downloads

Outdoor Umbrella for patio.

Product Version: Unknown

29938 Downloads

based on the Exo Pendant lamp by Tech Lighting; all three sizes created, drop length adjustable. NOT A CEILING HOSTED FAMILY.

No Rating

Product Version: Revit Architecture 2017

9884 Downloads

OVER-ALL

Art. S.1910W 9 MODULES LED 3000K  Max. 700mA 1755lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1569lmRated input power: 20.2WLuminaire efficacy: 78lm/WRequires remote ON-OFF power supply or Dimmable power supply CE - ENEC 03LUMINAIRE TYPESurface mounted up-light fitting . IP rating IP 65 IP67MATERIAL CHARACTERISTICSDie cast EN AB-47100 aluminium (low copper content) housing with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Mechanical resistance IK 08 Maximum load capacity --LIGHTING PERFORMANCEClear polycarbonate lenses. Toughened glass 5mm Micro Over-all, 6mm Mini Over-all, 8mm Over-all. Lamp  fixed position. LOR -- LOW SURFACE TEMPERATURESurface temperature of glass -- (Ta 25°C)INSTALLATION AND MAINTENANCEA4 stainless steel fixing clips. Over-all is supplied with a nylon insulating fixing base and 2 special keys (necessary to remove the luminaire). Allowing direct fixation to the solid ground.WIRINGSupply 5m cable section type H07RNF sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS III . Available colours: Aluminium grey (cod.14). Weight: 2.13 Kg Glow Wire test: --LED circuit included.OVER-ALL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

447 Downloads

Made in Revit 2020. HVL wall sconce. 

No Rating

Product Version: Revit Architecture 2020

3762 Downloads

Anova Airi Stix Outdoor Chair

No Rating

Product Version: Revit Architecture 2019

2675 Downloads

A simple 3d model of an outdoor security camera

Product Version: Revit Architecture 2009

16601 Downloads

Anova Airi Stix 6' Flat Outdoor Bench

No Rating

Product Version: Revit Architecture 2019

3605 Downloads

Outdoor Table and 4 Chairs

Product Version: Revit Architecture 2016

20936 Downloads

Outdoor Gym Family

Product Version: Unknown

2210 Downloads

 Wall Light from Bruckner Hudson Valley Lighting 

No Rating

Product Version: Revit Architecture 2020

2335 Downloads

Gun metal vent hood with built in lighting. Both hood and ductwork height is adjustable. Materials adjustable as well, just make sure you assign the vent lights to the "Light Filter" material before rendering.

All parameters should be instance parameters.

WARNING: Not a ceiling based model, so you will need to adjust duct height versus hood height.

Product Version: Revit Architecture 2015

26291 Downloads

Opla Outdoor Chair and Arm Chair by Grand Rapids Chair Company www.grandrapidschair.com 

No Rating

Product Version: Unknown

661 Downloads

No Rating

Product Version: Revit Structure 2020

186 Downloads

Product Version: Revit Architecture 2012

18582 Downloads

Product Version: Revit Architecture 2008

9016 Downloads

This familiy is modelled on the Searchlight Jupiter Stainless Steel Outdoor Wall Light.

This model has BULB ON and BULB OFF parameters under OTHERS within the Edit properties dialog once loaded into your project for switching on and off depending on daytime / night renders.

Dimensions are 300H, 130Dia, 160D (From wall)

Rendered to show both day and night renders.

Hope it comes in useful.

Product Version: Revit MEP 2014

15644 Downloads

Parametric

Product Version: Revit Architecture 2012

13591 Downloads

Product Version: Revit Architecture 2015

16290 Downloads

No Rating

Product Version: Revit Architecture 2019

147 Downloads

Product Version: Revit Architecture 2015

6375 Downloads

No Rating

Product Version: Revit Architecture 2011

5546 Downloads

Track Lighting

Product Version: Unknown

5607 Downloads

No Rating

Product Version: Unknown

16881 Downloads

Product Version: Unknown

4172 Downloads

MINISTAGE ROUND SPOT

Art. S.1315W1 MODULES COB 3000K  220-240Vac 1225lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1040lmRated input power: 11.2WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEProjector. IP rating IP 66MATERIAL CHARACTERISTICSDie-cast EN AB-47100 aluminium housing with high corrosion resistance.Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCE99.98% pure aluminium reflectors, or with concentrating lenses: The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source. Clear toughened glass. LOR -- INSTALLATION AND MAINTENANCEThe tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away. WIRINGSupply 5m cable section type FEP/FEP + PCP (Microstage and Ministage) or FLAT (Stage and Megastage) sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 1.73 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGN MICROSTAGE BLADE OF LIGHT PATENTED, REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

1998 Downloads