Telephone Data - Flush floor symbol

Product Version: Unknown

3472 Downloads

dedicated duplex floor outlet symbol

No Rating

Product Version: Unknown

2182 Downloads

Insert this spot elevation as a symbol and you will get the target, the line and 2 labels. The label above the line gives you an elevation in foot-inches. The label below the line gives you an elevation in engineer standards - 100.33' (example)

This works great on site plans, when you have to give the real site dimension compared to the architectural dimension you chose. 

Product Version: Revit MEP 2009

8668 Downloads

Here's the symbol.  It will import onto Level one.  Depending on how you have your sheets set up you may need to set an offset so it hovers over your furniture.

No Rating

Product Version: Revit Architecture 2010

497 Downloads

On countertop sink by Ceramic Design .  Designed and Manufactured in Italy and distributed in North America by www.rest-agio.com.  Download finish images and additional rfa. files at www.rest-agio.com as they become available.

Note: Files are in Revit 2012

Product Version: Unknown

13433 Downloads

Hood with flip up panel in either SS or glass by Maxfire.  Designed and Manufactured in Italy and distributed in North America by www.rest-agio.com.  Download additional rfa. files, specifications and pricing at www.rest-agio.com as they become available.

Note: Files are in Revit 2012 and parametric.

20% discount applies on all products from www.rest-agio.com

Product Version: Unknown

16878 Downloads

Hi diddly ho neighborinos!

Ned Flanders from the Simpson

Product Version: Revit Architecture 2019

223 Downloads

Double panel wall sliding door where you can adjust height, width, %swing, frame width & projection, panel foot & depth, elevation swing symbol visibility, rail height, panel material, frame material and rail material.

No Rating

Product Version: Revit Architecture 2008

5763 Downloads

This is a 2-pick line-based break line symbol.  After you click once to start the break line, an invisible line arrow will appear to indicate which side of the line the mask will be on.  By default it masks on the same side/direction as the exterior side of walls, i.e. outer side of a clockwise loop.

It also has a view scale parameter, which you can enter before you start drawing the break line.  Simply enter the view scale for each break line you draw, and all your break line jogs in your entire project will match size and shape exactly.

Note: the arrow is only visible while drawing the break line, or when you hover the mouse over it or pick it.

Product Version: Revit Architecture 2011

13967 Downloads

Premier SIPS, North America’s largest manufacturer of Structural Insulated Panels (SIPs), has been manufacturing SIPS for more than 20 years. Our testing and analysis programs have produced an extensive and comprehensive amount of proprietary data that allows us to help design professionals optimize designs with respect to both structural and energy concerns. Arming yourself with a SIPS product that is backed up with this accurate data helps you streamline the design process and make informed, dependable decisions.

Available at Autodesk: http://seek.autodesk.com/product/latest/agg/premiersipsbyinsulfoam/Premier-SIPS-by-Insulfoam/PremierSIPS

Premier SIPS by Insulfoam: Premier Structural Insulated Panels, SIPs, Structural Panels, Advanced Framing, Structural Wall Systems, Building Envelope Systems, Sandwich Panel, Pre-Fabricated Panel -

Product Version: Unknown

4864 Downloads

Revit 2019 : Can appear in a Site schedule, Place Family on control point. There are 3 Types of control points to choose from. Monument, Monument Calc’d and Control Point. Each type has its own Gen. Annotation symbol. The first two are square n. The 3rd is a triangle p. There is a 3D raised Triangle on Family. Use the top of the triangle to attach leaders for Spot coordinates and Elevations to create a leader to the top of the 3D Triangle on top. The NEE parameters are instance parameters and will not move the point. Use “Survey Site Tag NEE 2019 updated” To show the NEE on screen. Use Spot coordinates and Elevation tags to move the family to match the instance NEE. Enjoy!

Product Version: Revit Structure 2018

385 Downloads

This is the finished Facility Occupancy Load Schedule and Egress Plan. This is automated to calculate the occupant load based on the type of area then use that to calculate occupant load.

There are 2 tags. 1 for rooms, 1 for egress doors.

There are 4 schedules

1.      DOOR EGRESS SCHEDULE

2.      FACILITY OCCUPANCY SCHEDULE

3.      ROOM OCCUPANCY COMPARE SCHEDULE

4.      SPACE OCCUPANCY CLASSIFICATION

There is one sample Model.

Steps:

1.      Copy the schedules and tags to your current project.

2.      Open the Room occupancy compare schedule

3.      Select what type of area you see fit.

4.      Type in 0 sf for “NON CALCULATED ROOM AREA” to calculate occupants

5.      Manually type in tag value to match calculation to populate the room tag.

6.      Place the facility schedule on the code plan sheet.

7.      Place the Door egress schedule on the sheet too.

8.      Place all your room tags

9.      Place your egress door tags on 1 exit way door only per egress area

10.   Make a note of how you want to number your egress areas. ( I usually go clockwise from upper left to lower right)

11.   Fill in the Egress area for each room in the properties field. ( You can multiple select rooms at the same time and type in the value for all at once, use your filter)

12.   The Facility Schedule will populate.

13.   Type in the Occupant value to the Door egress schedule. Make sure they match. Hide Door egress schedule.

You’re done. Or pretty close J #JustinDesigns3D JustinDesigns3D@Gmail.com

Product Version: Unknown

3748 Downloads

Cast an artistic, scalable graphic symbol on your plans with real-time shadows that adjust to your solar study. And when viewed in elevation, just wow!! A true picture of the fluid and ever-dynamic real-life environment on your designs.

Explore more of these free families at https://dartfamilies.com/

Product Version: Revit Architecture 2020

2001 Downloads

It is a Line based detail component rather than a symbol. I made it this way so the overall length would stay the same if the scale changed. The text will change with the view scale and in the instance properties there is an input for a scale to change the arrow and circle sizes. (I preprogramed the typical scales so you can see how they work) There are 3 types of arrow heads and the text can be controlled separately. 

  Edit* the scale things does not work atm I will tryand fix it later.

Hope it helps,

smh

No Rating

Product Version: Revit Architecture 2014

2081 Downloads