Canopy, metal frame with turn-buckle support , wood members, solid sloped roof, downspouts on the side, fully parametrical

Product Version: Revit Architecture 2017

14557 Downloads

Cantilevered canopy – metal frame w/ egg-crate panels, fully parametric

Product Version: Revit Architecture 2015

2166 Downloads

Canopy Bed - All materials are listed under Canopy Bed 1 for easy location and changing of materials. including pillows front and back, sheets, and blankets as well as the bed frame material.

FILE TYPE: Revit 2012 64bit

Product Version: Unknown

35385 Downloads

Fully parametric canopy system based on the Mitchell Metals canopy system.  Allows you to drag it to the correct size and places the supports as required and recommended by the manufacturer.  The width/height is controlled to correspond to the manufacturer's maximum recommended dimensions. 

The parameters are shared between the support and the canopy system, you will most likely need to create the shared parameters in your own project or use the attached file.

No Rating

Product Version: Revit Architecture 2011

4708 Downloads

Using railing to model a glass canopy with posts and screens.

Product Version: Revit Architecture 2013

6143 Downloads

Glazed canopy on steel supports

Product Version: Unknown

15899 Downloads

TENSILE CANOPY TIED TO 4 CORNER POST, PARAMETRIC HEIGHT, WIDTH & LENGTH

Product Version: Unknown

22917 Downloads

A curver external canopy with editable width, length, curve radius, eaves, number of supports (3 to 5) and material parameters.

No Rating

Product Version: Revit Architecture 2009

8866 Downloads

This is a small exterior canopy. It's an generic model with lots of adjustability from size of structure (tubes) to length, width and height.

No Rating

Product Version: Revit Architecture 2015

6291 Downloads

First Parametric Canopy I made. Fairly straightforward

No Rating

Product Version: Revit Architecture 2015

4438 Downloads

This is a Wall Faced Log Canopy with lots of flexibility...

No Rating

Product Version: Revit Architecture 2015

3286 Downloads

Metal framed with curved support brackets and corrugated roof sheeting structure for sun control not parametric

Product Version: Revit Architecture 2008

4073 Downloads

Fully parametric Canopy

No Rating

Product Version: Revit Architecture 2015

4277 Downloads

Parametric Canopy. Horizontal Supports are Offset inwards rather than to the sides.

No Rating

Product Version: Revit Architecture 2015

2303 Downloads

Simple line-based covered parking canopy based off of off-the shelf system.  Parameters for roof material, structure material, number of columns (all will be equally spaces), and offset of columns left and right from edge of canopy.

This family has some customization, but if you have odd parking stall counts the equal column spacing may not meet your needs.  

Enjoy!

Revit 2019

Keywords: Parking, Structure, Canopy, Steel, Metal, Covered, Car, Truck

Product Version: Unknown

17507 Downloads

Fully parametric Canopy. The angled parameter can be a bit wonky.

Product Version: Revit Architecture 2015

5022 Downloads

an adaptive model of the canopy over BYU's Miller Park baseball stadium. 

Product Version: Unknown

5149 Downloads

Create custom Lilly pad shaped canopy for landscape

No Rating

Product Version: Revit Architecture 2017

1248 Downloads

Wall mount canopy range hood, parametric material

Product Version: Unknown

36939 Downloads

A curved canopy. Some problems occure with creating types after uploading the family to a project. It is better to create types by editing the family (no problems there).

No Rating

Product Version: Revit Architecture 2009

7984 Downloads

Curved Entrance Canopy

Product Version: Revit Building 9.1

7193 Downloads

Using simple railing to create arc canopy

No Rating

Product Version: Revit Architecture 2017

1803 Downloads

Simple canopy. C Channel frame with 6 cable supports

No Rating

Product Version: Revit Architecture 2015

6606 Downloads

Bulky Round Seat with canopy for outside

Product Version: Revit Architecture 2014

5344 Downloads

4' x 4' Sandbox with canopy

Product Version: Unknown

8672 Downloads

Pre-manufactured extruded aluminum canopies

Architectural Fabrication, Inc. Helios canopies are designed to provide a unique architectural feel to the exterior appearance of a building while providing rain and sun protection. All of our canopies have many customizable options (including: fascia, turnbuckles/hanger rods, hardware, etc) which can be selected to make the canopy unique to your project.

Product Version: Revit Architecture 2013

6361 Downloads

Metal framed gate with vertical metal tube pickets and decorative cross brace.

Product Version: Revit Architecture 2011

31679 Downloads

Hangs 6' from ceiling. Black cylinders, wood canopy finish. Modern Style.

Cutsheets available at links:

http://techlighting.com/Products/Fixtures/Multi-Port-Chandeliers/FreeJack-Round-Canopy-11-port

http://techlighting.com/Products/Fixtures/Line-Voltage-Pendants/Piper-Grande-Pendant

http://techlighting.com/Products/Fixtures/Low-Voltage-Pendants/Revel-Pendant

Product Version: Unknown

8402 Downloads

No Rating

Product Version: Unknown

593 Downloads

Metal framed gate with metal tube pickets.

Product Version: Revit Architecture 2011

19952 Downloads