A Wall hosted Wall Hanging ( Ovbiously ) of the Flying Spaghetti Monster, beheld by thousands as the omnipotent creator, an all seeing deity of highest regard. Please visit the website http://www.venganza.org for further proof of the Flying Spaghetti Monster and how it will affect your life. Pirates Welcome.

May you be blessed by his noodley appendages...

RAmen

Product Version: Revit Structure 2009

2116 Downloads

The Form-Based Landscape Code (FBLC) is a standard for classifying and creating virtual plants in BIM (CC-BY-SA 4.0 Credit: Robert Ward).It has applications in facility management, sustainability, and ecosystem valuation. The FBLC will lower the barrier for landscape architects to BIM allowing greater collaboration, lower cost, and better design outcomes. The FBLC has four parts: (1) Whitepaper, (2) FBLC classes (3) Form-type BIM library (4) hortoXML.

Release 1,1 Notes

-bug fix in gpyph parameter

No Rating

Product Version: Unknown

488 Downloads

Generic face-based model of the Minka Aire brand Pancake 52" ceiling fan.  Model number F738-WHF

The family has a parameter to control fan material.  Also a parameter to control offset from ceiling (hanging depth).

The fan is face based, and not ceiling based, as we often model our floors to have our finish ceiling layers, and wanted to be able to attach our fan to the bottom of the floor above if/as needed.

Enjoy!

Product Version: Revit Architecture 2020

8145 Downloads

This wall sconce is based on the Katie Small Acorn Sconce, designed by Thomas O'Brien for Visual Comfort (Circa Lighting). It has an acorn-shaped glass shade hanging gently from a metal backplate.

Materials are parametric. You can change the metal finish (instance) and shade finish (type).

Height: 13.4" Width: 6.5" Extension: 8.75" Backplate: 5.25" Round 

I'm a student and created this sconce for a project. This is my first upload. 

Product Version: Revit Architecture 2017

8437 Downloads

The High Capacity Drum Louvers (HCD) consist of extruded aluminum blades mounted inside a rotatable drum to produce long air throws with a high degree of directional control.

The HCD provides long throws to supply air to spaces that cannot be served by ductwork and conventional outlets due to structural or architectural restrictions. This makes the HCD ideal for use in warehouses, factories, stadiums, or any large enclosed space. For demanding environments such as industrial plants, or areas where corrosion resistance is necessary, an all stainless steel option is available. 

No Rating

Product Version: Unknown

47 Downloads

Depricated.

go to: v1.1

The Form-Based Landscape Code (FBLC) is a standard for classifying and creating virtual plants in BIM (CC-BY-SA 4.0 Credit: Robert Ward).It has applications in facility management, sustainability, and ecosystem valuation. The FBLC will lower the barrier for landscape architects to BIM allowing greater collaboration, lower cost, and better design outcomes. The FBLC has four parts: (1) Whitepaper, (2) FBLC classes (3) Form-type BIM library (4) hortoXML.

No Rating

Product Version: Revit Architecture 2020

334 Downloads

This window is fully parametric, as the title suggests. You can change the window's width, height, material and style. It supports single hung, hanging sliding, and casement styles. It comes with built in trim, shutters(toggleable), and transoms(toggleable); all of which are also parametric for both size and material. Transoms include both square and arched transoms.

Notes:

All materials are set to default grey material by default, with the exception of the glass material.

I havn't figured out how to toggle off openings when toggling off transoms, so put your wall material into the windows type to cover up the opening left behind.

You should be careful when adjusting arched transom sizes. Make sure that the size you are trying to create is even possible.

I didn't include inside trim because it was no use to me, comment if you'd like me to do so.

Any and all suggestions are appreciated.

If you plan on editing the window to suite your needs better, feel free to do so, but a word of caution; there are a lot of hidden aspects, and even the most subtle of changes can cause constraint errors. You might be better off leaving a suggestion.

Looking Forward To:

-Arched shutters to match arch transoms.

-Another shutter style.

-More trim options.

-User suggestions.

Product Version: Revit Architecture 2012

14179 Downloads

Please rate and comment, thanks!

Took a while to figure out how to get these to work properly.

The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.

The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.com

Cans be individually rotated in project.

!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!

Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).

The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.

You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.

I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.

Hope these are helpfull for you!

Product Version: Revit Architecture 2017

1017 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

Product Version: Revit Architecture 2017

625 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

No Rating

Product Version: Revit Architecture 2017

459 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

No Rating

Product Version: Revit Architecture 2017

435 Downloads

Download: http://offecct.bimobject.com/Green_Divider 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

GREEN DIVIDER provides a way to incorporate greenery into office environments, open spaces as well as the possibility to create spatiality. The design of GREEN DIVIDER is flexible and can be placed in different formations or stand alone. The attractive graphic form of GREEN DIVIDER means it works perfectly well with smaller plants, or even without any greenery.

Product Version: Revit Architecture 2014

88320 Downloads

Download: http://bimobject.com/en/elfa/product/inred_40_642 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app 

Basic elfa unit for clothing storage. 

Suitable for housing projects both behind sliding doors as well as in Walk In closets. Solution based on our unique elfa Hanging System for high flexibility, easy and fast installation. 

Long hang standards to ensure full future flexibility with both specific add on solutions or completely individual add on component by component made by the final end user.

Place add on solution (bedroom and/or linen solutions) at the far left or far rigth side if used together with sliding doors.

Use Clearance function to ensure correct depth for best practical function. 

If multiple sections are used, the second section from the left is adjusted in width in order to match total width. Please note that pull-out functions can not be adjusted in width. The actual adjustment of products is to be made by installer (cutting closet rod and wire shelf).

Product Version: Unknown

13776 Downloads