SEE WHOLE TUTORIAL ON

https://youtu.be/vT4yXobzp7I

SEE WHOLE TUTORIAL OF WINDOW

https://youtu.be/LuIXSrg_1BM

SEE WHOLE TUTORIAL OF HANGING LIGHT

https://youtu.be/OY1HhuuR4Hc

No Rating

Product Version: Revit Architecture 2016

108 Downloads

My carriage style sconce is made of glass and white painted aluminum and can be mounted to entrance ways & garages.  Use the floor plan to place component and set offset to 5’6”.   I also have same style Carriage light for hanging from the ceiling.  Use floor pan to place component and set offset to 6’8”

Product Version: Revit Architecture 2013

19842 Downloads

A Wall hosted Wall Hanging ( Ovbiously ) of the Flying Spaghetti Monster, beheld by thousands as the omnipotent creator, an all seeing deity of highest regard. Please visit the website http://www.venganza.org for further proof of the Flying Spaghetti Monster and how it will affect your life. Pirates Welcome.

May you be blessed by his noodley appendages...

RAmen

Product Version: Revit Structure 2009

2112 Downloads

Wall based   (H-ONT)    Home - Optical Network Terminal by Chorus NZ for fibre to the home installation (FTTH)

4 data port, 2 telephone ports, 230 v power and earth/comms.

Materials for various LED lights, case and ports.

MEP connections:  power, data and telephone

CBI (NZ)  78-11  cable communication systems

Revit 2018

Product Version: Unknown

1159 Downloads

This is a White ceiling based artichoke pendant light, with metal inner supports for the 66 fins.  The pendant Height is adjustable as a parametric instance from the properties panel, so you may have different lights at their own individual pendant heights in your Revit project. 

Note: This is a Revit 2021 family only

This model very closely replicates the Artichoke Pendant Light manufactured by Eternity Modern.

Product Version: Unknown

6735 Downloads

Generic face-based model of the Minka Aire brand Pancake 52" ceiling fan.  Model number F738-WHF

The family has a parameter to control fan material.  Also a parameter to control offset from ceiling (hanging depth).

The fan is face based, and not ceiling based, as we often model our floors to have our finish ceiling layers, and wanted to be able to attach our fan to the bottom of the floor above if/as needed.

Enjoy!

Product Version: Revit Architecture 2020

8069 Downloads

This wall sconce is based on the Katie Small Acorn Sconce, designed by Thomas O'Brien for Visual Comfort (Circa Lighting). It has an acorn-shaped glass shade hanging gently from a metal backplate.

Materials are parametric. You can change the metal finish (instance) and shade finish (type).

Height: 13.4" Width: 6.5" Extension: 8.75" Backplate: 5.25" Round 

I'm a student and created this sconce for a project. This is my first upload. 

Product Version: Revit Architecture 2017

8408 Downloads

This window is fully parametric, as the title suggests. You can change the window's width, height, material and style. It supports single hung, hanging sliding, and casement styles. It comes with built in trim, shutters(toggleable), and transoms(toggleable); all of which are also parametric for both size and material. Transoms include both square and arched transoms.

Notes:

All materials are set to default grey material by default, with the exception of the glass material.

I havn't figured out how to toggle off openings when toggling off transoms, so put your wall material into the windows type to cover up the opening left behind.

You should be careful when adjusting arched transom sizes. Make sure that the size you are trying to create is even possible.

I didn't include inside trim because it was no use to me, comment if you'd like me to do so.

Any and all suggestions are appreciated.

If you plan on editing the window to suite your needs better, feel free to do so, but a word of caution; there are a lot of hidden aspects, and even the most subtle of changes can cause constraint errors. You might be better off leaving a suggestion.

Looking Forward To:

-Arched shutters to match arch transoms.

-Another shutter style.

-More trim options.

-User suggestions.

Product Version: Revit Architecture 2012

14138 Downloads

Projects "MIAMI" horizontally on the side of a building

Note:

-Placing this 35' from your building will project an image 25' tall

-Your rendering needs to be at night with few artificial lights for this to work.

- You can change the color by selecting edit type.

Product Version: Unknown

1097 Downloads

Please rate and comment, thanks!

Took a while to figure out how to get these to work properly.

The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.

The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.com

Cans be individually rotated in project.

!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!

Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).

The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.

You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.

I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.

Hope these are helpfull for you!

Product Version: Revit Architecture 2017

1008 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

Product Version: Revit Architecture 2017

609 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

No Rating

Product Version: Revit Architecture 2017

449 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

No Rating

Product Version: Revit Architecture 2017

423 Downloads

Projects "MIAMI" vertically on the side of a building

Note:

-Placing this 60' from your building will project an image 85' tall

-Your rendering needs to be at night with few artificial lights for this to work.

- You can change the color by selecting edit type.

Product Version: Unknown

841 Downloads

This is a ceiling based artichoke pendant light, with metal inner supports for the 66 fins.  The pendant Height is adjustable AND Materials may be assigned as a parametric instance from the properties panel, so you may have different lights at their own individual pendant heights, and also assign a material to each light in your Revit project.

Note: This is a Revit 2021 family only

This model very closely replicates the Artichoke Pendant Light manufactured by Eternity Modern

Product Version: Unknown

2801 Downloads

Download: http://bimobject.com/en/elfa/product/inred_40_642 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app 

Basic elfa unit for clothing storage. 

Suitable for housing projects both behind sliding doors as well as in Walk In closets. Solution based on our unique elfa Hanging System for high flexibility, easy and fast installation. 

Long hang standards to ensure full future flexibility with both specific add on solutions or completely individual add on component by component made by the final end user.

Place add on solution (bedroom and/or linen solutions) at the far left or far rigth side if used together with sliding doors.

Use Clearance function to ensure correct depth for best practical function. 

If multiple sections are used, the second section from the left is adjusted in width in order to match total width. Please note that pull-out functions can not be adjusted in width. The actual adjustment of products is to be made by installer (cutting closet rod and wire shelf).

Product Version: Unknown

13747 Downloads

Download: http://halla.bimobject.com/huge_circle 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

The HUGE family of light fixtures includes solitary, pendant and ceiling-mounted types. Their shape is defined by a narrow aluminium frame. Thanks to various shapes and a broad range of light sources that may be arbitrarily arranged and combined, lights of the HUGE family will create a pleasant atmosphere particularly in shopping, social and cultural amenities. 

Type of installation:

• Surface

• Suspended

• Wall mounted

Product Version: Unknown

10225 Downloads