No Rating

Product Version: Revit MEP 2010

509 Downloads

No Rating

Product Version: Revit Architecture 2016

647 Downloads

Product Version: Revit MEP 2009

88 Downloads

Series FD-230-A epoxy coated cast iron floor drain/cleanout combination with anchor flange, integral trap, membrane clamp with weepholes, adjustable round heel proof nickel bronze strainer & cleanout top, removable plug, and no hub outlet.

No Rating

Product Version: Revit MEP 2014

400 Downloads

PPtrap M_Trap P - PVC - Sch 40 - DWV.csv

Product Version: Revit MEP 2013

7243 Downloads

MIFAB® Series F1560 extra heavy duty lacquered area drain with side outlet body, internal deep seal trap and cleanout, seepage pan, standard 1” (25) thick, 12” (305) square heavy (specify material finish) hinged grate and suspended sediment bucket.

No Rating

Product Version: Unknown

208 Downloads

Pit is floor hosted - for 4", 6", & 8" Pipe under 2' Depth

Product Version: Revit MEP 2009

2757 Downloads

MIFAB® Series F1120 lacquered cast iron floor drain with anchor flange, integral deep seal trap, and standard reinforced (specify diamter), (specify material finish) strainer. (For membrane floors, use MIFAB F1120-C Series.)

No Rating

Product Version: Unknown

59 Downloads

36"x25" charbrioler with grease slot and three knobs. Perfect for restaurant use.

Product Version: Revit Architecture 2012

3190 Downloads

MIFAB® Series F1170-C-SD lacquered cast iron floor drain with integral trap, 2” (51) cleanout (rodding eye), anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and adjustable “SD6” square 6” x 6” (152 x

152) with solid hinged cover and secondary grate. (Specify -44, 2” (51) no hub inlets as shown and required. Maximum three @ 90 degrees. Specify location -A, B, or C.)

No Rating

Product Version: Unknown

293 Downloads

MIFAB® Series F1130C lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, seepage collection sump, integral deep seal trap, and standard reinforced (specify diameter), (specify material finish) strainer, and standard reinforced 5” (127) diameter (specify material finish) top assembly floor cleanout with access cover, “O” ring Test Seal and plug with primary gasket seal. 

No Rating

Product Version: Unknown

36 Downloads

Lint Trap, Parametric 4 sizes.

No Rating

Product Version: Revit MEP 2016

514 Downloads

MIFAB® Series F1140C lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, seepage collection sump, integral deep seal trap, and standard 1” (25) thick, 7” (178) round (specify

F1140C-7) or 9” (235) round (specify F1140C-9), (specify material finish) tractor grate and standard reinforced 5” (127) diameter (specify material finish) floor cleanout with access cover, “O” ring Test Seal and plug with primary gasket seal.

No Rating

Product Version: Unknown

23 Downloads

A Float and Thermostatic Steam Trap.

*to change sizes use the "Diameter" parameter in the properties menu.

No Rating

Product Version: Revit MEP 2014

527 Downloads

Sink siphon (P-Trap) - metric. Adjust wall distance and vertical sink spacing.

Product Version: Revit Architecture 2008

3819 Downloads

Floor trap(floor base) for toilet

Product Version: Revit Architecture 2011

5479 Downloads

Wall Hung Vanity with Bullet Trap

No Rating

Product Version: Revit Architecture 2008

8996 Downloads

The MI-100 is engineered for equal distribution of water to all ports. It’s the perfect solution to keep sewer gas from entering the building from seldom used floor drains. The MI-100 can be located anywhere in the water supply and is engineered to permit the building owner to adjust the frequency and amount of water delivery through a timer and stainless steel solenoid valve. A manifold ensures that a minimum of 2 ounces of water are delivered to every port over a twenty-four hour period. The unit must be mounted 12” above the finished floor for every 20’ of water supply line. The MI-100 can be installed with a cabinet cover. The system is capable of priming from 1 to 30 floor drain traps. The MI-100 is practical to serve many floor drain traps in infrequently used buildings such as convention centers and sports facilities. The MI-100 is made of lead free materials that touch water.

No Rating

Product Version: Unknown

168 Downloads

Heres a Fully parametric shower tray and enclosure modelled for a recent job. The tray is changable in width and depth. The screen and screen framing changes when altering width & depth.

Shower tray material, Screen, Screen frame, Handle, and Trap materials are all changable.

Hope you like it.

Comments are welcome. Cheers

Product Version: Revit MEP 2014

72263 Downloads

Series FD-230-A epoxy coated cast iron floor drain/cleanout combination with anchor flange, integral trap, membrane clamp with weepholes, adjustable round heel proof nickel bronze strainer & cleanout top, removable plug, and no hub outlet.

No Rating

Product Version: Revit MEP 2014

102 Downloads

Series FD-430 epoxy coated steel side outlet area drain with anchor flange, 12-3/4 in. x 12-3/4 in. (324 x 324mm) square epoxy coated heel proof ductile iron hinged grate, integral trap with cleanout plug, sediment bucket, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

416 Downloads

MIFAB® Series F1160 Prison Cell floor drain with lacquered cast iron body and anchor flange, weepholes, 3” or 4” no hub side outlet, integral deep seal trap with cleanout plug and adjustable (specify material finish) strainer with T-20 torx and pin security screws. (For membrane floors, use MIFAB F1160-C Series.)

No Rating

Product Version: Unknown

261 Downloads

MIFAB® LIL-OS Series HDPE injection molded oil / sediment interceptor. Unit shall include: sediment bucket (1/4” diameter holes) underneath top inlet ductile iron grate(s), deep seal trap.

No Rating

Product Version: Unknown

64 Downloads

MIFAB® Series F1650-G flushing rim floor drain with white epoxy coated interior and exterior cast iron body, double wall deep seal trap with flushing connection, 3/4” (19) N.P.T. flushing connection in top assembly, anchor flange, membrane clamp, and stain finished (specify material finish) hinged grate and frame with stainless steel allen key vandal proof screws.

No Rating

Product Version: Unknown

148 Downloads

MIFAB® Series LIL-L HDPE injection molded lint interceptor. Unit shall include: two internal straining baffles with 3/8″ diameter holes spaced 1/2″ apart, internal deep seal trap, and HDPE injection molded, non skid, rectangular gasketed lid with securing latches.

No Rating

Product Version: Unknown

43 Downloads

MIFAB® LIL-SA Series HDPE injection molded sand interceptor. Unit shall include: two internal sand separation baffles with 3″ diameter holes, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches.

No Rating

Product Version: Unknown

55 Downloads

MIFAB® Series LIL-FUR HDPE injection molded fur interceptor. Unit shall include: two internal straining baffles with 1/4” diameter holes spaced 1/2” apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

27 Downloads

MIFAB® Series LIL-R HDPE injection molded rice interceptor. Unit shall include: two internal straining baffles with 1/4” diameter holes spaced 1/2” apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

25 Downloads

The Pronto!™ FD-190-PR-60 PVC adjustable floor drain offers 1 3/4” pre- and 7/8” post-pour adjustability with an integrated bubble level, two leveling shims and a reversible clamping collar with weepholes to ensure professional results. This floor drain also features an anchor flange, round nickel bronze strainer, and a solvent weld outlet. Options include vandal-proofing, trap primer tapping, a backwater valve, side outlet and a choice of funnels.

No Rating

Product Version: Revit Structure 2014

655 Downloads

MIFAB® LIL-F Series HDPE injection molded fish scale interceptor. Unit shall include: two internal straining baffles (first one with 1/4″ diameter holes and second one with 1/8″ diameter holes – both spaced 1/2″ apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

71 Downloads