Simple Door Tag. In order for it to work, you have to create 2 shared parameters in your door family:
Hardware Type & Door Frame Type. Then load this door in to the project and assign letters of your choice to these parameters.

Product Version: Unknown

5322 Downloads

MIFAB® / Hydromax Series MH-PG-D fabricated steel siphonic parking garage/Deck Drain Sump Reciever with ductile iron grate

No Rating

Product Version: Unknown

229 Downloads

This family has 4 different styles of residential exterior doors (vision, full lite, half lite, flush) with either 2 or 4 inch heads. It also has an optional storm door that can be turned on or off by instance. Door, storm door, glazing, and storm door handle all have parametric materials.

Product Version: Revit Architecture 2014

51183 Downloads

Fully parametric internal door.

Parametric door lining, door stop, architrave, frame & door tolerances, etc.

Openable to any angle in 3D (up to 179deg).  For some reason it doesn't like 180deg, but this would be physically impossible for a real door anyway.

One quirk: the angle must be changed in less than 120deg increments or the door handle position tends to break.  I'm sure this can be fixed easily enough, but I didn't find the time to do it yet...

Product Version: Revit Architecture 2013

73087 Downloads

Modified sliding pocket door including architraves, set to show door 3/4 open on plan and 3D

Product Version: Revit Architecture 2011

39582 Downloads

Door including options to have architraves, door handles (either knobs or levers) and also were these handles are to be located. ie: Only handles to the exterior and architraves to the exterior for a double cupboard door... Also includes the usual adjustable door swing and setback to whether the door is flush or recessed as well as being able to make the doors uneven if wanted.

Product Version: Unknown

22267 Downloads

Level based model component of a concrete driveway apron, to be placed at the threshhold of an overhead garage door leading to the driveway. Length is adjustable, dimensions of profile can be changed in type editor.

Created with Autodesk Revit 2023

No Rating

Product Version: Unknown

256 Downloads

Thought it was time I put something back. Parametric sliding door with pelmet. You can change Height Width Door Cover and Door Clearance and Materials and it will sort itself out.

Product Version: Unknown

19854 Downloads

Here's a framless glass door that I modified from another door type.  Has parametrics so you can change the door size, thickness, handle height, and schedules with your other doors.  Great for use in shower rooms with gyp. board or glass walls, etc. Hopes this helps those of you who are looking for this type of door!  :)

Product Version: Revit Architecture 2012

148763 Downloads

Parametric single flush door - Metric

Modern design

Material can be applied for Door leaf, Door Jamb, and Door knob

Product Version: Revit Architecture 2012

63389 Downloads

Warehouse Industrial Sliding Door (Adjustable Size) With A Regular Door (Adjustable Size and 45 or 90 Degree Swing)Inserted Inside The Sliding Door

Product Version: Revit Architecture 2016

9986 Downloads

contemporary barn door on rail. parametric door and frame. will tag for your door schedule.

Product Version: Revit Architecture 2016

55050 Downloads

The door frame will adjust with the wall thickness and the door swing is adjustable.

No Rating

Product Version: Revit Architecture 2013

13344 Downloads

One Nested Door having 2 Frames & 2 Leaves Make more than 100 TypesMulty lite varies 1Vx1H to 10Vx4H &Lites can be Glass or solid, 2ndry Frame width can be zeroVent Ht can be zero for door without Vent.Flush door can be panel door by inputing Mould depthSingle Rebate Wooden door frame can be change to double RebateHollow Metal door frame is double rebate onlyMaterial of different parts of door can be differentOperable 2D swing represent corresponding Leaf type3D swing is also operable, Grill Y/N in Vent

Product Version: Revit Architecture 2013

16901 Downloads

Reloaded the earlier door Project after minor rectification.

One Nested Door having 2 Frames & 2 Leaves Make more than 100 Types. Multy lite varies 1Vx1H to 10Vx4H & Lites can be Glass or solid, 2ndry Frame width can be zero. Vent Ht can be zero for door without Vent. Flush door can be panel door by inputing Mould depth. Single Rebate Wooden door frame can be change to double Rebate. Door handle Type can also be change with their elevation.  Hollow Metal door frame is double rebate only. Material of different parts of door can be differentOperable 2D swing represent corresponding Leaf type. 3D swing is also operable, Grill Y/N in Vent  --Lallan Ji

Product Version: Revit Architecture 2013

17386 Downloads

This is a door hinge which is a face based model.  When placed on the reveal of a door frame it allows another faced based model of a door panel (use the door's hinge edge as the face) to be placed on it. The family type variable opening angle can then be employed to open the door. This can also be used for opening windows.

Product Version: Revit Architecture 2014

2950 Downloads

Nested door having 2 door frames & 2 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  Lallan Ji

Product Version: Revit Architecture 2013

14183 Downloads

Nested door having 2 door frames & 3 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  Lallan Ji

Product Version: Revit Architecture 2013

21560 Downloads

Nested door having 2 door frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2013

12671 Downloads

door, colonial, georgian, glass window, round door knob, panels, brown, white, nohs, nohs door 

Product Version: Unknown

10861 Downloads

This is a basic security storm door with no screen or number of bar control. It does not cut the wall but allows you to place it in front of an existing door. There is an option to open the door 90 or 180 degrees in plan view.

Product Version: Revit Architecture 2012

13406 Downloads

This is a fully parametric 16x7 garage door with panels.  The top row is glass with an option for the grids.  There is also an option for panels across the top row.

Product Version: Unknown

6883 Downloads

Modified version of the arched door, this one has 6 clear glass panes on the door and 7 on the frame

No Rating

Product Version: Revit Architecture 2008

1457 Downloads

The basic Revit single panel door adjusted so door swing is 45 Degrees in plan.  Less clutter.

Product Version: Unknown

5581 Downloads

Door Closer in Revit 2017 for all kinds of doors. I looked for one for decades on this site and I couldn't find one separate from the door. Now you can put a door closer to any of your custom made doors.

Product Version: Revit Architecture 2017

1923 Downloads

In this Parametric door family a part from changing the size and materials as parametric option you will even have the option to change door panels like flush door or stile door panel. This is made in revit 2016 you wont be able to open it in older versions. If you find it useful please rate it. 

Product Version: Unknown

10822 Downloads

This is a fully parametric garage door with panels.  The top row is glass with an option to have the grids in the glass.  There is also an option for panels across the top row.  

Product Version: Unknown

8084 Downloads

Door with jamb and adjustable door panel

Product Version: Revit Building 9

23635 Downloads

This door has a 2"x4" metal frame. The door opening it creates is 2" wider thsn the door and you can dimension to the M.O.

No Rating

Product Version: Revit Architecture 2010

4279 Downloads

This family has been in the works for some time now. It has a steel door frame that embeds itself in the concrete, cuts the wall as needed and had the door panel.  The door frame also adjusts itself to wall thicknesses

Product Version: Revit Building 9.1

2556 Downloads