FIRE SERVICES

No Rating

Product Version: Unknown

12532 Downloads

Materials are listed under the properties tab in the edit type section for an easy change to any material or color that you would like. Not Parametric just the size of a regular Alarm Clock.

Product Version: Revit Architecture 2018

850 Downloads

Fire pit based on my own. Editable materials for base, tile, pan and lid.

Revit 2014

Product Version: Revit Architecture 2014

10514 Downloads

Modelled on a Curved wall mounted fire place.

Hope it comes in useful.

Product Version: Revit MEP 2014

22783 Downloads

A simple model of the glass fire case shown to hold a fire extinguisher or hose (not in the model). It's parametric, so you can change the width, height, and depth. It cuts from a wall. 

I suppose you could use this glass case for other purposes too. 

REVIT 2016 (not 2015)

Product Version: Revit Architecture 2016

2927 Downloads

Place as an architectural column. This wraps around the column to provide a 2 HR fire rating conforming to ULC Spec X518.

Created in Revit 2012

Product Version: Revit Architecture 2011

5914 Downloads

The Watts Model LF07S Residential Fire Sprinkler Dual Check Backflow Preventer is designed for non-health hazard [i.e., pollutant] application on potable fire sprinkler service connections to protect against possible backsiphonage conditions that could inadvertently drain the fire sprinkler system.

No Rating

Product Version: Revit MEP 2014

196 Downloads

Modelled fire sprinkler head for MEP services.

Fixed in size but changable materials.

Hope it comes in useful

Product Version: Revit MEP 2014

15225 Downloads

a general fire sprinkler works with MEP

Product Version: Unknown

13743 Downloads

This is a copper and stainless steel fire pit.

No Rating

Product Version: Unknown

3038 Downloads

FIRE ESCAPE BALCONY WITH LADDER

Product Version: Revit Building 8.1

8801 Downloads

Stainless Steel Non-Hosted Fire Extingusher Cabinet, Parametric for Sizes

No Rating

Product Version: Revit Architecture 2009

6995 Downloads

Fire

No Rating

Product Version: Unknown

8220 Downloads

Had to create some fire proofing for our columns and show them graphically on our structural model. We also needed WT columns which were not in revit

No Rating

Product Version: Revit Structure 2008

1396 Downloads

This is a little crude but neat, I think.

This fire pit is made of steel.  Just need a pipe through the middle for gas and a gas ring.  Then fill with stones and viola.

Product Version: Unknown

2201 Downloads

this is a high end 2 sided fire place great for large lodges and single story houses or 2 story houses with a lofted ceiling its complete with adjustable chiminy

Product Version: Revit Building 6.1

10451 Downloads

2D Fire Riser Family plumbing fixture.  used successfully on many projects in southern california. shows well in plan view.

updated to Revit2009

Product Version: Unknown

1551 Downloads

Standpipe connections for the Fire Department, Non-hosted, Parametric - Comes in 2 & 4 Pipe connections. Idealy through the wall of the building to street side

Product Version: Revit Architecture 2009

5242 Downloads

Hello, Revit community members Just thought of sharing this beautiful wall mounted Fire bucket family with you guys.

Product Version: Revit MEP 2018

974 Downloads

a bare-bones, wall hosted, recessed fire extinguisher cabinet, for when you don't need a lot of geometry. 

Product Version: Unknown

6225 Downloads

33x43x13 fire table

No Rating

Product Version: Revit Architecture 2015

691 Downloads

A wall based fire saftey plan box

Product Version: Revit Architecture 2012

2632 Downloads

Size and style based on L&L Easy-Fire top-loading electric kiln (hotkilns.com).

Reference Level view provides USA recommended clearances and other helpful info.

Product Version: Revit Architecture 2019

1840 Downloads

Wall Hosted Fire Extingusher Cabinets, one with Glass Vision Panel and one without (Inside the same familiy)

No Rating

Product Version: Revit Architecture 2009

9609 Downloads

A simple recessed fire extinguisher cabinet. Displays label "F.E.C." in floor plan views.

Product Version: Unknown

7197 Downloads

Adjustable fire extinguisher cabinet with three embedded types: surface mounted, semi-recessed, or recessed.

Product Version: Unknown

14739 Downloads

Parametric single fire escape door with with selection of ironnmongery including push bar

Product Version: Revit Building 8.1

11266 Downloads

SMALL FIRE TRUCK. 

Product Version: Revit Architecture 2010

13619 Downloads

general fire sprinkler with a cage. works with MEP

No Rating

Product Version: Unknown

4129 Downloads

Fire Extinguisher made in Revit 2014.

• Adjustable Height


• Pipe Connectors


• Standard Dimensions

This is my first uploaded family so I hope you Like it. take a look at www.incide.it

Product Version: Unknown

12631 Downloads