Insert as symbol to indicate structural framing span direction and member tag, populate a note block with framing information (e.g. 2x10@16")

Set length of arrow as actual span.

Set view scale in feet/in (1/4"=1'-0" represented as scale = 4'-0", 3/16"=1'-0"  as 3'-4")

No Rating

Product Version: Revit Architecture 2020

278 Downloads

Right sided elevation target that lets you change the elevation name and elevation number.

Product Version: Unknown

2930 Downloads

Left sided elevation target that lets you change the elevation name and elevation number.

No Rating

Product Version: Unknown

5942 Downloads

elevation - spot elevation
turn leader color to white for better result

Product Version: Unknown

2567 Downloads

Elevation tag that can have a different page number per elevation triangle.  How to load into project:

With this elevation tag family file open and a project file open click on load into project.  Then in the project file, Manage Tab, Addtnl Settings, Elev Tags, it should be in the value drop down box - choose it. Then, duplicate a new type for this new tag.

When you do a new elevation, edit the type and in the Value box of Elevation Tag Graphics choose the little box in the upper right corner that shows up when you select this Value box. Then at the next window choose the duplicated name from the type drop down. FAV Elev Mark or the custom name you created.

No Rating

Product Version: Revit Architecture 2011

2926 Downloads

Insert this spot elevation as a symbol and you will get the target, the line and 2 labels. The label above the line gives you an elevation in foot-inches. The label below the line gives you an elevation in engineer standards - 100.33' (example)

This works great on site plans, when you have to give the real site dimension compared to the architectural dimension you chose. 

Product Version: Revit MEP 2009

8393 Downloads

This is the elevation tag we use in Turkey. I modified original tag.

Product Version: Revit Architecture 2012

8120 Downloads

landarchBIM.com

A custom family with the ability to calculate the midpoint elevation, slope, and/or endpoint elevation of a line.

More information on this family.

No Rating

Product Version: Revit Architecture 2014

1493 Downloads

Well I modified and Oldie but Goodie Loaded by Mr. Bob.  Has Left and Right tags.  Use this when you have to note an elevation in a section.

No Rating

Product Version: Unknown

1349 Downloads

This is a NCS 4.0 Interior Elevation tag with the correct 5/8" dia circle built with Revit 2011

No Rating

Product Version: Unknown

7111 Downloads

This is a NCS 4.0 Exterior Elevation tag with the correct 5/8" dia circle built with Revit 2011

Product Version: Unknown

9869 Downloads

SPOT ELEVATION WITH LEFT AND RIGHT VISIBILITY + 2 LABELS

Product Version: Revit Architecture 2014

3912 Downloads

model pattern - Stonework Elevation varied coursing

Product Version: Unknown

2843 Downloads

A detail componant spot elevation with dragable line and user defind elevations and description for Revit 2022

Product Version: Revit Architecture 2020

520 Downloads

Spot Elevation created as a detail component, so you can place it in drafting views AND drag the end lines. Comes with visibility checkboxes to hide the left or right side leader line. Rate it if it helps!

Product Version: Revit Architecture 2012

5501 Downloads

Detail component 2d Elevation vase

No Rating

Product Version: Revit Architecture 2017

455 Downloads

Detail Component 2d Elevation Statue

No Rating

Product Version: Revit Architecture 2017

643 Downloads

Detail Component 2d Elevation Bust

No Rating

Product Version: Revit Architecture 2017

234 Downloads

Detail Component Elevation Large Vase

No Rating

Product Version: Revit Architecture 2017

583 Downloads

Elevation Level Symbol, allows you to add multiple levels and repeat names as opposed to revit "LEVEL" where you cant repeat names. Enjoy and personalize with your font and txt size. Insert using "SYMBOL"

No Rating

Product Version: Revit Architecture 2009

2001 Downloads

Create view reference tag as Section and elevation tags

No Rating

Product Version: Revit Architecture 2017

1910 Downloads

Product Version: Revit Architecture 2011

2909 Downloads

landarchBIM.com

Generic Spot Elevation Marker (Generic Annotation/ Symbol) for grading plans.

More information on this object.

No Rating

Product Version: Revit Architecture 2014

1570 Downloads

Built with Revit 2022

No Rating

Product Version: Unknown

249 Downloads

A wall-embedded eye wash station with a safety shower mounted through the ceiling. The model is made to adjust in elevation for the eye wash station, shower head height, and ceiling height. The only caviat to this exact model is that the "Elevation" instance property needs to match the "Box Elevation" type property.

No Rating

Product Version: Revit Architecture 2017

1663 Downloads

Elevations showing mounting heights of toilets, stalls, and accessories

Product Version: Revit Architecture 2008

8310 Downloads

Parametric. You can change the width and depth of the shelf, and its height off the ground. You can also change how far apart the two wall supports are. 

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the support, not the shelf. Make sure the two elevation constraints are the same.

No Rating

Product Version: Unknown

11137 Downloads

This is a simple marker in 3D to populate a schedule of survey points around a property line.  Control point, Bench Mark

Product Version: Revit Architecture 2009

2515 Downloads

2 D Elevtion Parametric Tree : Height Parameter adjusts with width (Scalable)

Product Version: Unknown

6167 Downloads

Simple Transformer.  The origin is the bottom center.  Similar to transformer thats out of the box.  I created an elevation parameter.  Many times we have xfmr's hanging to conserve space.  Since there isnt a set houskeeping pad size thats ever used I didnt include it.  Sketch out an extrusion and make the pad 3".  So the elevation of the transformer would be 3".  Hope that makes sense.  Let me know if it works.  Its been tested an no issues that I can see.

No Rating

Product Version: Revit MEP 2010

4448 Downloads