JA_WOOD SIDE TABLE

No Rating

Product Version: Revit Architecture 2014

1151 Downloads

Bed side table with safe. Table is parametric, but the safe is not. Probably best suited in a hotel/motel design. Enjoy!

No Rating

Product Version: Unknown

156 Downloads

Simple Arts and Crafts Side Table

No Rating

Product Version: Revit Architecture 2008

2811 Downloads

An HSS tube steel side view (or front, if you prefer) with instance controlled parameters.  Change Length, Width and Wall Thickness separately for each annotation without the need to load multiple types.

Product Version: Revit Structure 2014

2690 Downloads

Ikea Lack Side Table

http://www.ikea.com/ca/en/catalog/products/40104270 

No Rating

Product Version: Revit Architecture 2011

11204 Downloads

Based on the OOTB AISC Angle Shapes - Side, this family adds a flip operation and the ability to show the leg hidden.

No Rating

Product Version: Revit Structure 2010

1252 Downloads

My best recreation of the 608D Side Chair from Old Hickory Furniture.  Non-para.

Made it for my wife who's an interior design student.  Hopefully it helps some other people out there.

No Rating

Product Version: Revit Architecture 2017

399 Downloads

A parametric Kerb whoes lower part is vertical (height can be set to zero) while one side of upper part is curved. Top & botom width as well as upper Ht, Lower Ht  Length & material can be set indepentently. By Er. L.J.Upadhyay. Varanasi India 919919640999

No Rating

Product Version: Revit Structure 2018

395 Downloads

Fully parametric internal door.

Parametric door lining, door stop, architrave, frame & door tolerances, etc.

Openable to any angle in 3D (up to 179deg).  For some reason it doesn't like 180deg, but this would be physically impossible for a real door anyway.

One quirk: the angle must be changed in less than 120deg increments or the door handle position tends to break.  I'm sure this can be fixed easily enough, but I didn't find the time to do it yet...

Product Version: Revit Architecture 2013

72511 Downloads

Stacking or Bi-folding partition wall with central pass door, modified model from someone on this site (Thanks!).

The only control to worry about is the 'Bi Fold' parameter - automatically flips central pass door depending on panel numbers (2 onwards), or stacks the panels to one side

Product Version: Revit Architecture 2013

24679 Downloads

Courtesy of www.REVITCARS.com this is a Detail Component for the side view of a VW Passat. Enjoy!

Product Version: Unknown

10912 Downloads

Modified sliding pocket door including architraves, set to show door 3/4 open on plan and 3D

Product Version: Revit Architecture 2011

39327 Downloads

flexible painted overhead cab w/ side rack

No Rating

Product Version: Unknown

1962 Downloads

flexible wood overhead cab w/ side rack

No Rating

Product Version: Unknown

2261 Downloads

A highly parametric dooor for all of your doooring needs

Parameters: The materials should be self-explanatory, as long as you remember that the interior is the side with the doorknob. Here are the dimensional parameters:

-Doorknob depth: The depth of the doorknob

-Doorknbob X posistion: the X posistion of the doorknob (0 is at the right of the door)

-Doorknob Y posistion: the Y posistion of the doorknob (0 is at the bottom of the door)

-Doorknob base radius: the radius of the end of the dorknob that touches the door

-Doorknob outer radius: the radius of the other end of the doorknob

-Exterior depth: the depth of the exterior part of the door (must be negative)

-Exterior frame thickness: the thickness of the frame on the exterior of the door

Product Version: Unknown

46 Downloads

Door including options to have architraves, door handles (either knobs or levers) and also were these handles are to be located. ie: Only handles to the exterior and architraves to the exterior for a double cupboard door... Also includes the usual adjustable door swing and setback to whether the door is flush or recessed as well as being able to make the doors uneven if wanted.

Product Version: Unknown

22110 Downloads

www.REVITCARS.com brings you this detail component side view for a VW Passat.

Product Version: Unknown

6810 Downloads

This window family has type parameters to drive shim space, frame, mullion, & sash width & depth, glazing unit thickness and materials. Also, wall sheathing location can be set by instance for different wall assemblies, the flange setback will control how far in front of the sheathing the window will project. Lites & transom can be toggled on or off. Also, this family features nested families for picture, casement, awning, gliding, & single hung operation with proper representation in elevation for window, lites, and transoms. This should accommodate a wide variety of window configurations in a single family. 

Product Version: Revit Architecture 2015

8578 Downloads

Thought it was time I put something back. Parametric sliding door with pelmet. You can change Height Width Door Cover and Door Clearance and Materials and it will sort itself out.

Product Version: Unknown

19539 Downloads

This is a glass sliding door that is installed on the exterior side of the door opening, designed by Foaporte. This is fully adjustable and materials can be changed to ones favor wether it be glass, wood, metal, etc.

Product Version: Unknown

56264 Downloads

This is a glass sliding door that is installed on the exterior side of the door opening, designed by Foaporte. This is fully adjustable and materials can be changed to ones favor wether it be glass, wood, metal, etc.

Product Version: Unknown

44667 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

189 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

75 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

86 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

80 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

59 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

80 Downloads

AGRV_Door_SwingSingleA_單平開門A

(Hinge on the right hand side when outside and facing the door)

Metric Single Swing door with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

490 Downloads

AGRV_Door_SwingSingleA_單平開門A

(Hinge on the right hand side when outside and facing the door)

Metric Single Swing door with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

295 Downloads

Here's a framless glass door that I modified from another door type.  Has parametrics so you can change the door size, thickness, handle height, and schedules with your other doors.  Great for use in shower rooms with gyp. board or glass walls, etc. Hopes this helps those of you who are looking for this type of door!  :)

Product Version: Revit Architecture 2012

147377 Downloads