This end panel is sized for 25" and 30" countertops.

No Rating

Product Version: Revit Architecture 2011

1977 Downloads

Parametric 1200 x 2400mm slatboard panel (100mm pitch)

No Rating

Product Version: Unknown

401 Downloads

This is like a garage door except that it is not flush with the ground. You find them in service windows etc. 

It is fully parametric (height, width, elevation, size of panels, materials)

REVIT 2016

Product Version: Unknown

23090 Downloads

Modified version of the arched door, this one has 6 clear glass panes on the door and 7 on the frame

No Rating

Product Version: Revit Architecture 2008

1449 Downloads

Nested door having 1 wooden door cum window frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  By adding param of Left or/& Right window with one can win frame also . No leaves are added in window frames to avoid the heavy size of the family.  Lallan Ji

No Rating

No Rating

Product Version: Revit Architecture 2018

478 Downloads

Nested DL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins, Security Grills can be adjusted on/off etc.  etc. Lallan Ji Upadhyay.

No Rating

Product Version: Revit Architecture 2015

1527 Downloads

Nested DL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins, Security Grills can be adjusted on/off etc.  etc. Lallan Ji Upadhyay

No Rating

Product Version: Revit Architecture 2015

1459 Downloads

Door Closer in Revit 2017 for all kinds of doors. I looked for one for decades on this site and I couldn't find one separate from the door. Now you can put a door closer to any of your custom made doors.

Product Version: Revit Architecture 2017

1887 Downloads

This is office furniture that I created. Cannot remember the manufacturer. I will start with uploading the wall panels and continue with the surfaces and storage compartments.
(First upload is the base panel)

Product Version: Unknown

24177 Downloads

Cubicle Panel

Product Version: Revit Building 9

4371 Downloads

This is my first object so I try to do a baluster panel type

No Rating

Product Version: Revit Architecture 2010

703 Downloads

Standing seam roof panel for metal buildings

No Rating

Product Version: Revit Architecture 2008

9135 Downloads

Nested 3SL window having 1 frame of 3 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

485 Downloads

Nested SL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins, Security Grills can be adjusted on/off etc.  etc. Shared Param files attached  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

598 Downloads

This family is parametric so you can set the width, height, panel opening angle and louvered blade angles.

It is restricted to 4 panels, 2left and 2 right, and if you open the panels wider than 90degrees it gets confused, so if anyone can fix this for me I will be grateful.

My first upload to RevitCity!

Product Version: Revit Architecture 2016

6440 Downloads

A quick model of the Butterfly MX 11.6" screen recessed entry panel for entry access for apartment buildings.  

This family is wall hosted, but you can also open the hosted panel family to insert into a different family type if desired.

Materials are parameter controlled, dimensions are not.  I included a parameter for wall assembly depth in case you need to offset the box for any specific additional depth at unique conditions.

Enjoy!

No Rating

Product Version: Revit Architecture 2020

655 Downloads

Wall Hosted Fire Extingusher Cabinets, one with Glass Vision Panel and one without (Inside the same familiy)

No Rating

Product Version: Revit Architecture 2009

9537 Downloads

Nested 1DL1SL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

673 Downloads

Nested SL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

Product Version: Revit Architecture 2015

1007 Downloads

REVISADO (PERMITE INCLINACIÓN)

LÁMINA PARA TECHO, LARGO PARMÉTRICO

ROOF PANEL, PARMETRIC LENGTH

MANUFACTURER: CINDU.COM

No Rating

Product Version: Revit Architecture 2018

90 Downloads

This door has a 2"x4" metal frame. The door opening it creates is 2" wider thsn the door and you can dimension to the M.O.

No Rating

Product Version: Revit Architecture 2010

4256 Downloads

Nested 1DL1SL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

836 Downloads

Nested 2DL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

855 Downloads

Sick of having 10 different families for different amounts of panels in windows. Use this, 1 of many multi-panel windows where you can specify how many panels you require.

Product Version: Unknown

24100 Downloads

Sick of having 10 different families for different amounts of panels in windows. Use this, 1 of many multi-panel windows where you can specify how many panels you require.

Product Version: Unknown

23280 Downloads

This is useful for anyone that works on school projects. This is an "all-in-one" control panel we use for classroom applications, thought I'd share this with the RevitCity community. My model contains a clock, PA speaker, phone, light swtiches, operator switch for PA, duplex receptacle & data outlet; these can be mixed and matched based on your needs.

Product Version: Revit Architecture 2013

5210 Downloads

A ceiling hosted attic/ceiling access panel. Has two sizes predefined

Product Version: Unknown

14209 Downloads

These files are based on 3Form Panels and 3Form Suspend Solutions Hardware. These files are meant to be used together and placed into the Project Environment. The Panel can be customized in width and height (Note that 3Form panels are typically 4'-0" wide by 8'-0" high maximum) and is placed by the centerline in height to coordinate with the suspension system parameters. The hardware suspension system has adjustments for overall height and the panel centerline height to move the clips up and down. The clips can be switched from center clips to end clips and the bottom attachment can be changed from floor mounted to wall mounted as well. NOTE: THIS DOWNLOAD ONLY DOWNLOADS THE SUSPENSION SYSTEM. THE PANEL IS LOCATED IN A SEPARATE DOWNLOAD.

No Rating

Product Version: Revit Architecture 2013

3982 Downloads

Decorative curtainwall customized pattern panel

Product Version: Revit Architecture 2017

6109 Downloads

Glazed Panel w Awning

Product Version: Revit Building 6

2655 Downloads