The door frame will adjust with the wall thickness and the door swing is adjustable.

No Rating

Product Version: Revit Architecture 2013

13121 Downloads

This is an improved version of a shutter I downloaded with true beveled edge around raised panel, and parametric stile and rail widths.

Product Version: Unknown

5494 Downloads

<>Stainless Steel S-Shape - Suspended Ceiling Panel

Visit my website at http://www.4u2cdesign.com

Product Version: Revit Architecture 2010

9795 Downloads

Very basic model of a ceiling electric panel. It has 6 black plugs and 6 little circular ones. 

Parametric- you can change the width, length and materials.

REVIT 2016

No Rating

Product Version: Revit Architecture 2016

1271 Downloads

Parametric Height, Width and ground clearance. Wall hosted. 

2.5" HSS tube & 1.75"x1.75" angle frame with corrigated metal panel inset; not adjustable

Product Version: Revit Architecture 2014

9929 Downloads

Butler Pre-Engineered Metal Building MR-24 Standing Seam Roof Panel Adj Length.

Product Version: Unknown

7999 Downloads

2 Panel Quarter Arch top shutter with beveled panels. Fully parametric. Arch based on 2" per foot of width.

Product Version: Revit Architecture 2010

2893 Downloads

Revit 2022

door family with varrying panels of that style which can be switched with a family type parameter.

Parameters include:

- Width

- Height

- Frame Thickness

- Thickness (door)

- Center Rail Height

- Top Rail Width

- Center Rail width

- Side rail width

- Bottom Rail Width

- Trim Width

- Trim Thickness

- Handle Height

- Handle Inset

- New (instance)

- Existing (instance)

- Undercut (instance)

- Deadbolt On/Off (instance)

No Rating

Product Version: Unknown

1084 Downloads

Revit 2022

Door family with varrying panels of that style which can be switched with a family type parameter.

Parameters include:

- Width

- Height

- Frame Thickness

- Thickness (door)

- Center Rail Height

- Top Rail Width

- Center Rail width

- Side rail width

- Bottom Rail Width

- Trim Width

- Trim Thickness

- Handle Height

- Handle Inset

- New (instance)

- Existing (instance)

- Undercut (instance)

- Deadbolt On/Off (instance)

No Rating

Product Version: Unknown

959 Downloads

Fully Parametric Classical Decorative panel

Product Version: Revit Architecture 2013

954 Downloads

Curved Panel

No Rating

Product Version: Revit Building 6

2362 Downloads

Various Detail Components for Metal Panel Systems

No Rating

Product Version: Unknown

3146 Downloads

One panel window to be used as desired. Comment/rate.

Product Version: Revit Architecture 2011

16868 Downloads

MCC typical panel and transformer section. Revit 2022.

No Rating

Product Version: Unknown

124 Downloads

Simple solar panel w/ angle adjust and sixe parameters.

Product Version: Revit Architecture 2009

39193 Downloads

Raised panel shutter with variable width and height, top panel stays square based on width and height changes.

Product Version: Revit Architecture 2008

4265 Downloads

An 7' and 8' high partially parametric Garage Door, with trim

Product Version: Revit Architecture 2008

17140 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

Product Version: Revit Architecture 2018

183 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

104 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

94 Downloads

External door opening in.
Single vision panel
Handle, escutcheon and kickplate

Product Version: Unknown

2597 Downloads

Nested SL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

1158 Downloads

Stacking or Bi-folding partition wall with central pass door, modified model from someone on this site (Thanks!).

The only control to worry about is the 'Bi Fold' parameter - automatically flips central pass door depending on panel numbers (2 onwards), or stacks the panels to one side

Product Version: Revit Architecture 2013

24615 Downloads

This family represents the holdown posts and plywood shear panel found in a shear wall. There is a visibility parameter for adding a second plywood layer on the opposite side of the studs.

No Rating

Product Version: Revit Architecture 2018

513 Downloads

Puerta interior de 1 hoja ciega, con apertura abatible / Interior door, single flush, blind panel

Más familias / more families: shop.a3d.es

No Rating

Product Version: Revit Architecture 2012

2616 Downloads

door, colonial, georgian, glass window, round door knob, panels, brown, white, nohs, nohs door 

Product Version: Unknown

10642 Downloads

This is a basic security storm door with no screen or number of bar control. It does not cut the wall but allows you to place it in front of an existing door. There is an option to open the door 90 or 180 degrees in plan view.

Product Version: Revit Architecture 2012

13174 Downloads

Revit customized Adaptive panel which user can adjust manually

No Rating

Product Version: Revit Architecture 2017

1255 Downloads

Nested SL window having 1 frame of 2 bay  & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

1526 Downloads

Parametric dimensions, materials and percentage of opening.

Comments and critique welcomed.

_____________________________________________

Product Version: Revit Architecture 2011

26641 Downloads