 |
BVN AIR
AC VENTILATION UNITS FORWARD CURVED
HÜCRELİ FANLAR ÖNE EĞİMLİ |
No Rating |
Product Version: Revit Architecture 2016
1045 Downloads
|
|
| |
Wall-Hosted family. Curved grab bar for ADA shoower. Can be mirrored into position if needed. Fully adjustable w/ pull arrows. |
|
Product Version: Revit Architecture 2010
6713 Downloads
|
|
|
 |
Ultra Modern Glass Chandelier - Fragmented Pieces of Curved Glass from a Central Base Point Rising to its Peak
Blue Metal Panels + Green-Blue Glass Wedges make this visionary light fixture
Visit my website at http://www.4u2cdesign.com
|
No Rating |
Product Version: Revit Architecture 2010
4162 Downloads
|
|
|
 |
A simple spa that has controls for the height, width & materials. Minimum width 1 and width 2 is 2000mm due to the curved spa top.
|
No Rating |
Product Version: Revit Architecture 2013
10740 Downloads
|
|
|
 |
Curvilinear Reception Desk in the shape of a Water Wave
Elevated Glass Counter Top, Blue Counter with Mulit-Level Recessed Voids + Curved Base Support
Visit my website at http://www.4u2cdesign.com
|
|
Product Version: Revit Architecture 2010
35253 Downloads
|
|
|
 |
BVN AIR
AC VENTILATION UNITS
BACKWARD CURVED
MUTFAK EGZOZ FANI
GERİYE EĞİMLİ |
No Rating |
Product Version: Revit Architecture 2016
1105 Downloads
|
|
|
 |
Modern DVD Tower - Curved Vertical Panels stack up to form this center tri-core assembly. Blue DVD Panel, Black Vertical Supports and Aluminum Circular Base w/ Vertical Rod for Support.
Visit my website at http://www.4u2cdesign.com
|
No Rating |
Product Version: Revit Architecture 2010
3027 Downloads
|
|
|
| |
Modified "Curved Shower Rod with Curtain". |
No Rating |
Product Version: Unknown
7963 Downloads
|
|
|
 |
BVN AIR,
AC WALL MOUNTED DUCT FAN
BACKWARD CURVED
DUVAR TİPİ KANAL FANI
GERİYE EĞİMLİ
|
No Rating |
Product Version: Revit Architecture 2016
1128 Downloads
|
|
|
 |
BVN AIR
SQUARE DUCT FAN
BACKWARD CURVED
HÜCRELİ MUTFAK EGZOZ FANI
GERİYE EĞİMLİ |
No Rating |
Product Version: Revit Architecture 2016
606 Downloads
|
|
|
 |
A parametric Kerb whoes lower part is vertical (height can be set to zero) while one side of upper part is curved. Top & botom width as well as upper Ht, Lower Ht Length & material can be set indepentently. By Er. L.J.Upadhyay. Varanasi India 919919640999 |
No Rating |
Product Version: Revit Structure 2018
428 Downloads
|
|
|
 |
BVN AIR
RECTANGULAR IN LINE DUCT FAN
AC DIRECT DRIVE , FORWARD CURVED
DİKDÖRTGEN KANAL FANI
HARİCİ MOTORLU , ÖNE EĞİMLİ |
No Rating |
Product Version: Revit Architecture 2016
355 Downloads
|
|
|
 |
BVN AIR
AC RECTANGULAR IN LINE DUCT FAN
BACKWARD CURVED
PLASTİK KANAL TİPİ FAN
|
No Rating |
Product Version: Revit Architecture 2016
853 Downloads
|
|
|
 |
BVN AIR
AC RECTANGULAR IN LINE DUCT FAN
FORWARD CURVED
DİKDÖRTGEN KANAL FANI
ÖNE EĞİMLİ |
No Rating |
Product Version: Revit Architecture 2016
393 Downloads
|
|
|
 |
BVN AIR
AC CENTRIFUGAL IN LINE DUCT FAN
BACKWARD CURVED
KANAL TİPİ FAN
GERİYE EĞİMLİ |
|
Product Version: Revit Architecture 2016
1159 Downloads
|
|
|
 |
Modern Dining Table - Round Glass Top with
Chrome Polished Legs - Curved + Stylish
Visit my website at http://www.4u2cdesign.com
|
|
Product Version: Revit Architecture 2010
13261 Downloads
|
|
|
 |
BVN AIR
AC DIRECT DRIVE RECTANGULAR IN LINE DUCT FAN
BACKWARD CURVED
DİKDÖRTGEN KANAL TİPİ FAN
HARİCİ MOTORLU |
No Rating |
Product Version: Revit Architecture 2016
475 Downloads
|
|
|
 |
Revit 2022
Door family with varrying panels of that style which can be switched with a family type parameter.
Parameters include:
- Width
- Height
- Frame Thickness
- Thickness (door)
- Center Rail Height
- Top Rail Width
- Center Rail width
- Side rail width
- Bottom Rail Width
- Trim Width
- Trim Thickness
- Handle Height
- Handle Inset
- New (instance)
- Existing (instance)
- Undercut (instance)
- Deadbolt On/Off (instance) |
No Rating |
Product Version: Unknown
282 Downloads
|
|
|
 |
Fantech Industries (Australia and New Zealand).
Fantech 300 S bathroom exhaust fan - wall based
Curved face interior grille and flat faced exterior grille.
Material finish as per manufacturer low sheen white plastic
CBI (NZ) 76-11 General air exhaust systems
Revit 2018 |
No Rating |
Product Version: Unknown
5461 Downloads
|
|
|
 |
This casework family is a model of American Woodmark's single door, single drawer model, which includes one adjustable shelf. The door and drawer both open. The door is reversible. The URL parameter opens the catalog wherein you can find this cabinet. The five widths offered by American Woodmark are included as family types along with their model numbers. All materials are pre-defined and assigned via casework sub-categories.
I've upgraded this model. The door opens more reliably. Best practice for operating it is to open and close it in angular increments of something less than 90°. The face plates have more ornate engravings and curved handles. |
No Rating |
Product Version: Revit Architecture 2013
5382 Downloads
|
|
|
 |
The Lynx modern collection of armchairs, two and three seater sofas. Designed with clean linear lines with a beautiful top stitching detail and eye catching chrome legs. Reinforced frame with plywood skinning where possible, including plywood under bottom. Anti-tamper security fixings including use of non-retractable screws and no visible staples.
Constructed using fire retardant CMHR foams and Chromed metal legs.With 150mm access underneath for cleaning purposes andsupportive curved back aids good posture and comfortable sit. Also with wide supportive arms. A Large selection of fabrics including vinyls to help tackle infection control issues available.Complementing our Lynx tubs and benches.
(Created in Revit 2014) |
|
Product Version: Unknown
16568 Downloads
|
|
|
 |
This is a very complex but also very robust cubicle family. It is entirely parametric. The available cubicle sizes from the manufacturer are set as types but all dimensions and controls are parametric. The family contains one of the 3 cubicles shown in the image. Manufacturer's Write Up: This modern, circular workstation design comes in the following diameters: 84"W (minimum), 96"W, 108"W, 120"W as well as custom sizes. The post heights can be 29", 36", 42", 49", 67" and 84"H or any height within this range. The curved walls can be fabricated from acrylic, laminate, printed on styrene or metal, all in numerous colors and finishes. Worksurface material options are High Pressure Laminate, Thermofoil,or Powdercoat on MDF. Stations can come with an integrated electrical system. This workstation concept can be customoized to fit your space. We can assist you with the space planning of this unique workstation design. |
|
Product Version: Revit Architecture 2011
23530 Downloads
|
|
|
 |
This is a casework family model of American Woodmark's 1 door, 1 drawer, 1 deep roll out tray, 1 adjustable shelf base cabinet. The door, drawer, and tray all operate independently. The shelf is vertically adjustable and is held in place with clips. The five widths offered by American Woodmark are included as family types. Materials are pre-defined and assigned using casework subcategories.
I have updated this model. It has more subtle engraving on the doors, curved handles, and the door opens more reliably. Open it in angular increments of something less than 90°. For example, if you want it opened to 90°, do it in two operations with the first angle 70° and then go to 90°. Close it the same way. |
|
Product Version: Revit Architecture 2013
3887 Downloads
|
|
|
 |
This casework family is over the top! There are the usual casework dimensions, but in addition, there are instance parameters to open the doors, pull out the top drawer, and slide out the two shelves hidden behind the doors, all individually controlled. There are dedicated materials assigned by casework subcategories. The model is replete with pots and pans sitting on the sliding shelves. There are ten predefined widths. At the narrower sizes, you'll see the pots and pans sticking out through the cabinet sides, so if you want, for instance, a 21" unit, you'll have to edit the family to remove or reposition them. The unit is modelled on the American Woodmark line of cabinets. The properties URL will take you to the American Woodmark web site. This is a complex model. I have tested it thoroughly, but if there are any difficulties, please leave a note for me.
I have updated this model. It has more subtle engraving on the doors, curved handles, and the doors open more reliably. Open them in angular increments of something less than 90°. For example, if you want them opened to 90°, do it in two operations with the first angle 70° and the next 20°. Close them the same way. |
|
Product Version: Revit Architecture 2013
7369 Downloads
|
|
|
 |
Our Madison range comes with a high back and upholstered arms to ensure maximum comfort. Showwood feet available in Bleached Beech, Cherry, Natural Beech, Oak, Walnut and Wenge stains as standard, plus customers own stains.
Reversible cushions ensure even wear and prolong fabric life.Polished Timber Feet (Front) plus Castors (Rear) to aid manoeuvrability.The Extreme version is the same domestic looking settee with high back and elegantly curved arms to ensure maximum comfort yet constructed to benefit from all the safety features required for challenging environments. It is ergonomically designed to guarantee good posture. It has a reinforced frame with plywood skinning and plywood under bottom to add extra weight.Anti-tamper security fixings such as no visible staples and use of non-retractable screws.Metal back tacking has been removed - slip stitching where requiredExtreme feet fitted with non-retractable bolts and removable cushions for easy cleaning.Reversible cushions prolong the life of the upholsteryZipper tag over sewn.
(Created in Revit 2014) |
|
Product Version: Unknown
10032 Downloads
|
|
|
 |
This wall sconce features a modern rectangular form accented by an elegantly curved glass shade. Parameters include options for 4 finishes. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
6025 Downloads
|
|
|
 |
This wall sconce features a modern rectangular form accented by an elegantly curved glass shade. Parameters include options for 4 finishes. Manufactured by Holtkötter. |
No Rating |
Product Version: Revit Architecture 2011
5536 Downloads
|
|
|
 |
The Noguchi table is a piece of modernist furniture first produced in the mid-20th century. Introduced by Herman Miller in 1947, it was designed in the United States by Japanese American artist and industrial designerIsamu Noguchi. The Noguchi table comprises a wooden base composed of two identical curved wood pieces, and a heavy plate glass top. |
|
Product Version: Revit Architecture 2016
6014 Downloads
|
|
|
 |
Manufacturer: Santa & Cole
Designer: Hector Roqueta /Ferran Sesplugues
2005
Support made of a curved stainless steel AISI 304* tube with a polished finish. The tube has a diameter of 33 mm and plates at either end for subjection to the ground.Incorporates a clip to join both supports made of black polyamide and stainless steel AISI 304*, with a polished finish.As it is modular, this element can be combined in multiple ways.The bike rack is delivered unassembled and assembly instructions are included.It is fixed to the ground by two screws per stainless steel plate.Maintenance is not required.Weight, standard module 16 Kg. |
|
Product Version: Revit Architecture 2013
5695 Downloads
|
|
|
 |
The Lynx Tub Chair. A versatile collection including armchairs, sofas, tubs and benches. With modern clean lines, beautiful top stitching detail and eye catching polished metal legs. Supportive curved back aids good posture. With wide supportive arms and a 150mm gap underneath for cleaning purposes. A large selection of fabrics including vinyl to help infection control issues available. Made from fire retardant CMHR foams. With mortise and tenon joints, glued and screwed also features strong metal chromed legs.
Pay us a visit at Knightsbridge Furniture
   
(Created in Revit 2014) |
|
Product Version: Unknown
18996 Downloads
|
|
|
Search