I revised what Chilimac had uploaded. This is a kitchen island that has a bar with stools and a sink and dishwasher. 

Product Version: Revit Architecture 2009

108528 Downloads

Kitchen Island utilizing 30 and 60 degree angles. This uses standard Revit cabinets.

42" Standard Bar Height.

Material Parameters exist for Countertop Material, Wall Material, and Brace Material.

Product Version: Revit Architecture 2013

25930 Downloads

• The table top is made of 1/2" glass with beveled edge


• Glass top is securely attached to the base with steel bars finished in high gloss chrome


• Dimensions: L 48" x W 26" x H 18"

No Rating

Product Version: Revit Architecture 2012

3667 Downloads

Series LF40L, LF40XL Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LF40L has a short thermostat for installation directly in available tank tapings. Model LF40XL has an extension thermostat for installation in the hot water outlet within the allowable distance from the top of the tank. Series LF40L, LF40XL valves are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

156 Downloads

Series LFLL40XL, LFLLL40XL Extended Shank Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature an extended shank for installation on water heaters with extra thick insulation as well as a Lead Free* cast copper silicon alloy with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LFLL40XL is available in sizes 3/4 and 1 in. (20 and 25mm). Model LFLLL40XL is available in size 3/4 (20mm) with an extra long extended shank. Series LFLL40L, LFLLL40XL valves are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

79 Downloads

8 in 1 Revit family to save you time from downloading each of the equiptment. Pommel Horse and Parallel Bars has landing mat which can be turn off.

Equipment are Ring Tower, Uneven Bars, Single Bar, Vault, Inground Trampoline, Pommel Horse, Parallel Bars and Bnlance Beam.

Enjoy.

Product Version: Revit Architecture 2018

6472 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

No Rating

Product Version: Revit Architecture 2015

6859 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

5549 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

8877 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

8191 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

5077 Downloads

• Table top is rectangular shape 1/2 inch glass with beveled edge


• The wood base has eclipse shape


• Glass top is securely attached to the base with eclipse shape steel bars finished in high gloss chrome


• Dimensions: L 48" x  W 26" x H 17"

Product Version: Revit Architecture 2012

4536 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

11342 Downloads

Modern Shower rose, adjustable in height, bar length & tap position, based on Kohler design.  Not totally squared away may have problems with height position

No Rating

Product Version: Revit Architecture 2009

2808 Downloads

Series LFSL100XL, LFL100XL, LFLL100XL and LFLLL100XL Lead Free* Extended Shank Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. They feature an extended shank for installation on water heaters with extra thick insulation as well as a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LFSL100XL is suitable for water heaters with up to 1-3/4 in. (45mm) of insulation. Model LFL100XL is suitable for water heaters with up to 2 in. (51mm) of insulation. Model LFLL100XL is suitable for water heaters with up to 2-1/2 in. (64mm) of insulation. Model LFLLL100XL is suitable for water heaters with up to 3 in. (76mm) of insulation. Series LFSL100XL, LFL100XL, LFLL100XL and LFLLL100XL are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

81 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

6919 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

9910 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

6316 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

10853 Downloads

Power Tower Pull up Station based on the dimensions of the X-Factor Pull Up Station Chin Up and Dip with Sit Up Bar VKR. 5 Adjustable height setting in both Inches and based on the settings of the original pull up station.

No Materials

Product Version: Revit Architecture 2020

3362 Downloads

Wood dining room set with adjustable heights.  Preset types with 30" standard height, 36" counter height, and 42" bar height.  Materials are also adjustable.

Enjoy!

Product Version: Revit Architecture 2014

18447 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.  Designed for a home work shop.

Product Version: Revit Architecture 2015

19554 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

No Rating

Product Version: Revit Architecture 2015

5814 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

603 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

333 Downloads

Ikea Living room set containing two coffee tables (square and rectangular) as well as an end table.  Types set up for each as well as instance parameters set up for the material.  The type parameters are set to where if you'd like a different size table you can easily do so with the type parameters.

There are two material types since the way the model was made the grain ran the opposite way it should so for those pieces I created a new material, basically the same as the original only rotated 90 degrees so if you do decide to use a different material know that you'll have to make the same material again only rotated 90 degrees.

Please rate/comment.  Thanks!

No Rating

Product Version: Revit Architecture 2011

10152 Downloads

This is my most ambitious family yet.

This ADA-compliant countertop and sink(s) was made to solve frustrations in our office that there were no functional and flexibile families to meet generic bathroom sink and countertop needs.

This accomplishes that, I feel.

User can specify length of the countertop, materials, and up to four sinks or as few as zero.  

 Sink locations space automatically to fill the surface, depending on how many sinks are visible.  If for some reason you'd like the sinks to be asymmetric, a "shift sink" field is avaiable in the properties bar.

Product Version: Revit Architecture 2014

35901 Downloads

Floor based custom coffee table built out of various sizes of PVC pipe.  I built this in real life years ago and finally built a revit family for it.  Height, as well as table top thickness and radius are parametric.  Both top and base have material parameters.  "pipe base" sizing not parametric since it is quite complicated.  If looking to make table much wider, I'd suggest editing family and scaling each "pipe" set to your desired size.  Enjoy!

Revit 2017

Product Version: Unknown

1336 Downloads

Kitchen Island utilizing 45 degree angles. This uses standard Revit cabinets.

42" Standard Bar Height.

Material Parameters exist for Countertop Material, Wall Material, and Brace Material.

Includes "Defy 600 Hob and under counter oven" uploaded by Cassie

Defy 600 Hob and under counter oven

Product Version: Revit Architecture 2013

27893 Downloads

Shuffleboard table, 10'-4" length (8'-8" playing surface length).  Parameters control materials and puck on/off visibility.

Dimensions are not parameter controlled.  Based on dimensions of Indio metal outdoor shuffleboard table from Pottery Barn. Felt color is blue.  

https://www.potterybarn.com/products/indio-metal-shuffleboard-slate-mp/?pkey=cgame-tables

Keywords: Shuffleboard, puck, bar game, game

No Rating

Product Version: Revit Architecture 2020

2728 Downloads