Fully Parametric room tag that shows wall finish, base finish, floor finish and ceiling finish 

Product Version: Revit Architecture 2013

4451 Downloads

A very modern and sophisticated look with a full refrigeration option for Ice Cream Cakes and novelty, it is available in Deli, Pastry and 4 models in Self Serve. It can tie into any Oscartek™ Gelato and Ice cream showcase. It has a tilt back hydraulic front glass for ease of cleaning. Available in any Oscartek™ pre-finish. LED lighting is standard.

No Rating

Product Version: Revit Architecture 2014

7240 Downloads

A very modern and sophisticated look with a full refrigeration option for Ice Cream Cakes and novelty, it is available in Deli, Pastry and 4 models in Self Serve. It can tie into any Oscartek™ Gelato and Ice cream showcase. It has a tilt back hydraulic front glass for ease of cleaning. Available in any Oscartek™ pre-finish. LED lighting is standard.

No Rating

Product Version: Revit Architecture 2014

3179 Downloads

A very modern and sophisticated look with a full refrigeration option for Ice Cream Cakes and novelty, it is available in Deli, Pastry and 4 models in Self Serve. It can tie into any Oscartek™ Gelato and Ice cream showcase. It has a tilt back hydraulic front glass for ease of cleaning. Available in any Oscartek™ pre-finish. LED lighting is standard.

Product Version: Revit Architecture 2014

2440 Downloads

A very modern and sophisticated look with a full refrigeration option for Ice Cream Cakes and novelty, it is available in Deli, Pastry and 4 models in Self Serve. It can tie into any Oscartek™ Gelato and Ice cream showcase. It has a tilt back hydraulic front glass for ease of cleaning. Available in any Oscartek™ pre-finish. LED lighting is standard.

Product Version: Revit Architecture 2014

3597 Downloads

Do you use RCP's as Lighting/Electrical plans?  So do we!  These families have an invisible model line at 7', so if you set your RCP cut plane to just below 7', all of your outlet symbols will show up.  I got tired of having to change it for each project, and I'm sure lots of other people have too.  So this is basically the outlet that everyone else has offered, but with that model line so that it will show up on an RCP. 

No Rating

Product Version: Revit Architecture 2008

7249 Downloads

A very modern and sophisticated look with a full refrigeration option for Ice Cream Cakes and novelty, it is available in Deli, Pastry and 4 models in Self Serve. It can tie into any Oscartek™ Gelato and Ice cream showcase. It has a tilt back hydraulic front glass for ease of cleaning. Available in any Oscartek™ pre-finish. LED lighting is standard.

No Rating

Product Version: Revit Architecture 2014

3049 Downloads

A very modern and sophisticated look with a full refrigeration option for Ice Cream Cakes and novelty, it is available in Deli, Pastry and 4 models in Self Serve. It can tie into any Oscartek™ Gelato and Ice cream showcase. It has a tilt back hydraulic front glass for ease of cleaning. Available in any Oscartek™ pre-finish. LED lighting is standard.

Product Version: Revit Architecture 2014

2886 Downloads

A modification to one of Andygleach's light fixtures.  Farmhouse style light fixture, ceiling-mounted, Parametric pendant drop height and materials.

Product Version: Unknown

5393 Downloads

A giant Chinese Lantern style light fixture. Non-parametric fixture. Parametric distance from ceiling.

Product Version: Unknown

3719 Downloads

This is a ceiling mounted light fixture... you can't really tell from the pic but it consists of several layers of light blue acrylic in a cloud shape... so it appears more blue in renderings....

Product Version: Revit Architecture 2009

18507 Downloads

A very modern and sophisticated look with a full refrigeration option for Ice Cream Cakes and novelty, it is available in Deli, Pastry and 4 models in Self Serve. It can tie into any Oscartek™ Gelato and Ice cream showcase. It has a tilt back hydraulic front glass for ease of cleaning. Available in any Oscartek™ pre-finish. LED lighting is standard.

No Rating

Product Version: Revit Architecture 2014

5087 Downloads

A very modern and sophisticated look with a full refrigeration option for Ice Cream Cakes and novelty, it is available in Deli, Pastry and 4 models in Self Serve. It can tie into any Oscartek™ Gelato and Ice cream showcase. It has a tilt back hydraulic front glass for ease of cleaning. Available in any Oscartek™ pre-finish. LED lighting is standard.

No Rating

Product Version: Revit Architecture 2014

4016 Downloads

A small glass chandelier made for a stylish ceiling

Product Version: Unknown

4154 Downloads

CEILING MOUNTED ISLAND RANGE HOOD

Product Version: Revit Architecture 2008

31162 Downloads

BLITZ 4 WINDOWS

Art. S.4089W 1 MODULES COB 3000K  220-240Vac 1867lm 17.4W CRI 90 MacAdam step 3Rated luminaire luminous flux: 303lmRated input power: 18.1WLuminaire efficacy: 17lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCELuminaires come with toughened glass lenses already installed using the appropriate "lens-carrier slide". These may be substituted with coloured dichroic lenses. INSTALLATION AND MAINTENANCEA robust, die-cast aluminium cap is secured to the base with four stainless steel screws. WIRINGDouble cable entries with PG13,5 (Ø 7÷12 mm) cable glands. Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.9 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

929 Downloads

Circular Halo Pendant Light - fully parametric in placement height, depth, inside radius, and outside radius (therefore lens thickness). Hosted by level, not ceiling.

Hanging cords not included, as many manfucturers use different hanging styles.

Product Version: Revit Architecture 2015

1075 Downloads

LED Recessed fixture use for Living room, Kitchen, Bedroom ceiling...

♥Enjoy ♥ !

Product Version: Revit Architecture 2017

7183 Downloads

Medium span scissor truss w/bearing point (Flat ceiling for porches, etc.) Plumb Cut

No Rating

Product Version: Unknown

2301 Downloads

CMi Series In-Ceiling SpeakersSoundTube’s CMi series incorporates BroadBeam® full-frequency dispersion technology and fixed-wing installation features for any type of hanging-tile or sheetrock application.

No Rating

Product Version: Unknown

2111 Downloads

BLINKER

Art. S.6080W 1 MODULES COB 3000K  220-240Vac 2419lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 567lmRated input power: 23WLuminaire efficacy: 25lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 06LIGHTING PERFORMANCEReflector in 99.98% pure anodized aluminium . Acid-etched toughened glass 4 mm thick. LOR -- INSTALLATION AND MAINTENANCEThe recessing box is provided with support ribs that make it crush-proof during installation; the ribs are molded to the recessing box and cannot fall out before installation. The ribs must be removed before the installation of the luminaire. The lamp body is secured to the recessing box through stainless steel clips; the electric components are protected by a covering reflector that houses the light source. WIRINGSingle cable entry . Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.28 Kg Glow Wire test: --LED circuit included.BLINKER REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

213 Downloads

Hosted to floor, can adjust mounting height. Not hosted to ceiling. With exit sign symbol on plan.

No Rating

Product Version: Revit Architecture 2011

1231 Downloads

Parametric Exit Sign.

Family is face based so it can be used on a linked ceiling.

Available parameters:

  Color of letters (Red or Green)

  1 Sided or Two Sided

  Arrows to left or right

No Rating

Product Version: Revit MEP 2010

19079 Downloads

This is a simple outdoor ceiling based 1' black light box.

No Rating

Product Version: Revit Architecture 2013

4164 Downloads

This is a parametric hanging box light. It is not ceiling based but you can change the elevation of the light and the length of the cables so that they'll go up to the cieling. You can also change the width, length and materials. 

REVIT 2016

Product Version: Revit Architecture 2016

16835 Downloads

2012 Mercedes CLS 350 CDI - All materials are listed under CLS350 for easy location and changing of materials.  I've started working with lights so you can turn off the lighting by changing the materials of each to chrome to maintain an off effect.

NOTE: AutoCad File to large to download

FILE TYPE: Revit 2012 64 bit

Product Version: Revit Architecture 2012

8520 Downloads

Wall mounted Ansul Pull from the R-102 Fire Suppresssion System. Can be either flush mounted or mounted with the conduit running outside of the wall. The conduit has an parameter allowing you to enter the height of the ceiling above for it to die into. Mounts at 4'-0" AFF (standard).

No Rating

Product Version: Revit Architecture 2013

4145 Downloads

MINIREEF BOLLARD

Art. S.5240W 1 MODULES COB 3000K  220-240Vac 1740lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1090lmRated input power: 16.8WLuminaire efficacy: 65lm/WPower supply Dimmable  DALI 2 / PUSH CELUMINAIRE TYPEBollard fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) and extruded EN AW-6060 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCE99.98% pure anodized aluminium reflector. Polycarbonate lens  transparent  with controlled downward light emission for avoiding any glare, UV-stabilised and vandalproof . Lamp  fixed position . INSTALLATION AND MAINTENANCEGarden mounted fixtures are to be installed and used with the ground stake accessory or cemented root flange. These cannot be installed directly to the ground or cement bases without the relative accessories because the contact between the two different materials may lead to an accelerated process of oxidation of the fixture. WIRINGDouble cable entries with grommets. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), BURNISHED BRONZE (cod.20). Weight: 6.13 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

410 Downloads

2011 Cadillac DTS Limousine - All materials are listed under LIMO for easy location and changing of materials.  Lighting materials are set up for the headlights, fog, and rear running lights just need to change the corresponding materials listed under LIGHTS to the matching material LIMO - LIGHTS - ON.

File type: Revit 2012 64 bit

Product Version: Revit Architecture 2012

7845 Downloads

ceiling mounted glass light fixture

No Rating

Product Version: Unknown

4400 Downloads