Parametric controls give one more flexibility for ceiling or floor mounted units

Product Version: Revit Building 9.1

2274 Downloads

Fully dynamic family of Titus TDC diffuser. This diffuser was designed to be an accurate representation of all sizes of this type shown in the 2004 Titus catalog. It is not an exact architectural model. It serves only as a tool for mechanical design to represent the diffuser and to carry all the applicable mechanical data realted to it such as airflow, size, throw, manufacturer, model, etc... (Some customization may need to be performed to coordinate the shared parameters used in the design of this model with your schedules.)

Product Version: Revit MEP 2008

2594 Downloads

Two "beds" to lay down, and bench seating the rest of the way around. Complete with headrests and an LED ambient lighting fixture. Filled with water.

Product Version: Revit Architecture 2010

1724 Downloads

Lithonia Lighting OVFL 2RH Floodlight.  2-Head LED Security Floodlight

No Rating

Product Version: Revit Structure 2017

8442 Downloads

This Light is Fully Parametric. It is not hosted.  The part witch attaches to the Ceiling can all so be angled to match the slop of the ceiling. This is done by entering a number with inches over 12" (ex. for a 4/12 slope enter 4")

Because of popular demand I remade this based  off the 2015 verstion that I made a while back. 

The light is made by Delray Lighting Inc.

http://www.delraylighting.com/big_lights.html

 Hope you like it,

smh

Product Version: Revit Architecture 2014

8702 Downloads

Lighting Fixture Family

Materials Changeable 

No Rating

Product Version: Revit Architecture 2018

9213 Downloads

This is a helical bulb with 26 watts and 1700 lm/w made as close to the real thing as i could, not sure what use you could have, maybe use for track lighting so you dont have to group or something, not sure, comments are welcome

Product Version: Unknown

2514 Downloads

non parametric carriage lamp based on Visa Lighting, Midlands Craft 12". Revit Version 2015

Product Version: Unknown

14386 Downloads

Lighting Fixture Family

Materials Changeable 

No Rating

Product Version: Revit Architecture 2018

4274 Downloads

Please ignore the grass I needed the right lighting for the sofa... I designed this completely from my head. Behind the back cushions there is rolled back support for extra comfort.

Product Version: Revit Architecture 2012

14217 Downloads

McKeon top coiling fire door with egress pocket door.  The egress door is located in a pocket in the wall and when the system activates, it swings into position and the coiling door drops from above.  This family includes all elements as well as a 'closed' and 'open' position.  It is hosted on a face of a wall, more specifically the back of the pocket where the egress door is in.  Ceiling height and width are instance controlled parameters allowing you to set them specifically for each import.  It includes 2d linework details (copies from McKeon) for both side tracks in plan view and then the coiling mechanism above the ceiling in elevation and section views.

Product Version: Revit Architecture 2011

3005 Downloads

https://www.etsy.com/listing/483924039/ray-double-wall-light-modern-wall-sconce?ref=share_v3_lx

here is the link if you wish to buy it 

REVIT VERSION 2022

Product Version: Unknown

5522 Downloads

Designed By Muuto, Lightology

11.5" Tall and 12.75" Wide

Material is dtermined by Type

Ceiling Based 

No Rating

Product Version: Revit Architecture 2020

466 Downloads

Red Spot Light, but colour is changable. Spotlight case material can be changed. Ceiling Based

Product Version: Revit Architecture 2009

15983 Downloads

Modern Cascading Chandelier - Dropped Chord Bulbs

Spiraling Downward in a Cascade Pattern

Design by PLC Lighting

Visit my website at http://www.4u2cdesign.com

No Rating

Product Version: Revit Architecture 2010

11249 Downloads

Wall mounted uplight. Materials are parametric. Be sure to set the lens material to glass and the reflector to Chrome or Mirror. Based on the Varial by Belfer Lighting.

Product Version: Unknown

8368 Downloads

MINISTAGE ROUND SPOT

Art. S.1315W1 MODULES COB 3000K  220-240Vac 1225lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1040lmRated input power: 11.2WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEProjector. IP rating IP 66MATERIAL CHARACTERISTICSDie-cast EN AB-47100 aluminium housing with high corrosion resistance.Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCE99.98% pure aluminium reflectors, or with concentrating lenses: The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source. Clear toughened glass. LOR -- INSTALLATION AND MAINTENANCEThe tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away. WIRINGSupply 5m cable section type FEP/FEP + PCP (Microstage and Ministage) or FLAT (Stage and Megastage) sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 1.73 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGN MICROSTAGE BLADE OF LIGHT PATENTED, REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

1928 Downloads

Light based on the Sphere by Eden Lighting. 

No Rating

Product Version: Unknown

3177 Downloads

AVENUE STREET LIGHTING 36led

Art. S.3090N36 MODULES LED 4000K  220-240Vac 12614lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 9976lmRated input power: 107WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 66MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLE CONNECTIONPole mounted in painted aluminium with Ø 102 mm connection. ON REQUEST ADAPTOR for cylindrical poles Ø 76 mm.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H05RN-F cable. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Anthracite grey (cod.24). Weight: 18.96 Kg Glow Wire test: -- Exposed windage area : 0,06 m² ( 1000mm ), 0,05 m² ( 800mm ), 0,04 m² ( 645mm )LED circuit included.AVENUE PATENT PENDINGThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

678 Downloads

Basketball Backstop on Pole, Ceiling and Floating

Product Version: Revit Building 9.1

14447 Downloads

Glass Sconce with exposed bulb. Edison bulb. Black Finish. Industrial. Farmhouse Fixture. Bar lighting. 

No Rating

Product Version: Revit Architecture 2018

13947 Downloads

Gymnasium light fixture ceiling mount.

No Rating

Product Version: Revit Structure 2009

5220 Downloads

BR40 Can Light Structure

Ceiling Based Object

Enjoy!

Product Version: Revit Architecture 2017

29451 Downloads

Replication of Ashland wall sconce light by SPI Lighting.

Revit 2022 file

Product Version: Unknown

1531 Downloads

You can change the material of things but the size is not parametric. 

No Rating

Product Version: Revit Architecture 2013

3332 Downloads

Art Sconce

No Rating

Product Version: Unknown

4661 Downloads

A basic, but parametric "house". It is meant to show what an area would look like with other nearby structures.

*Notes*

• Automatic lighting does not work , but it is disabled by default anyway


• Several of the parameters have misleading names


• Feel free to use this however you want

No Rating

Product Version: Unknown

317 Downloads

Height parameter included as well as material parameters. Should act as a ceiling based fixture. REVIT 2023

No Rating

Product Version: Unknown

1067 Downloads

Create By Mohamed Mostafa 

at Revit 2016

My Channel Youtube

https://www.youtube.com/c/MohamedMostafaAlsharif

My Page in FaceBook

https://www.facebook.com/3dquality

Product Version: Revit MEP 2016

351 Downloads

Non-hosted lamp.  Currently shown as wall mounted but could be adapted to be desk mounted.  No lighting attributes - for room layout purposes only

Product Version: Revit Architecture 2009

8383 Downloads