Ceiling lighting component for kitchens, offices, rooms, etc. Material can be modified as well as light intensity. Enjoy.

Product Version: Revit Architecture 2010

28334 Downloads

Parabolic shape / t-5 bulb lighting / commercial setting

Height Adjustable / Ceiling Mounted

Product Version: Revit Architecture 2015

15962 Downloads

Its not actually a ceiling light, its just a lighting component i think, but it is easily ofset to the correct height.

Im uploading this because it's the light i always use in my renderings because it provides a good even source.

Hope this helps.

Made at NOHS

Product Version: Unknown

20082 Downloads

based on the Exo Pendant lamp by Tech Lighting; all three sizes created, drop length adjustable. NOT A CEILING HOSTED FAMILY.

No Rating

Product Version: Revit Architecture 2017

9829 Downloads

*****REVIT 2021 DOWNLOAD*****

Parametric Ceiling Fan family with lighting included

Material and Light Source distance from ceiling parameters included.

***Make sure to change light diffusor material to a self illuminated glass so light source will show***

Product Version: Revit Architecture 2020

11060 Downloads

Distance from ceiling and materials - parametric.

Product Version: Revit Architecture 2013

59098 Downloads

Gun metal vent hood with built in lighting. Both hood and ductwork height is adjustable. Materials adjustable as well, just make sure you assign the vent lights to the "Light Filter" material before rendering.

All parameters should be instance parameters.

WARNING: Not a ceiling based model, so you will need to adjust duct height versus hood height.

Product Version: Revit Architecture 2015

26133 Downloads

Simple ceiling lamp created for a small project. ispiration from Vistosi Comó PL. d= 170mm h= 220mm

No Rating

Product Version: Revit Architecture 2015

9970 Downloads

Another quickly modelled Ceiling Pendant.

Again, ceiling drop and ceiling rose, Shade and wire connection all changable in materials.

Size of shade is 420dia x 260h.

No Rating

Product Version: Revit MEP 2014

21088 Downloads

This lighting fixture is a model of the 52" Harbor Breeze ceiling fan.  The four lights can be individually turned on.  The fan blades are nested families and if you open one for editing, you'll be able to adjust the blade angle and length within reasonable bounds.  They are preset for the 52" model.

Product Version: Revit Architecture 2013

21742 Downloads

Quickly Modelled Ceiling Pendant for a small domestic job.

Ceiling drop is changable and also materials for Shade, Shade trim, Ceiling rose and wire connection.

Enjoy

Product Version: Revit MEP 2014

18816 Downloads

This is a very robust, fully parametric lighting family based on Edge Lighting's Monorail System. Within the the one family there is a 4' & 8' monorail with various pendant hosted to it. The pendants contained are the "Copa", the "Fili", the "Kiki", the "Pahu", the "Peri" and the "Scope". Each pendant family also has types within it representing the finishes available from Edge Lighting.

Product Version: Revit MEP 2011

24434 Downloads

First one of the day....

Yet another Ceiling pendant. this time a contrast of wood and ceramic shade. All materials are changable along with the ceiling drop height.

Face based family.

Enjoy

Product Version: Revit MEP 2014

16764 Downloads

This is a designed lamp which can be placed anywhere in the ceiling in the ceiling plan can change materials also

No Rating

Product Version: Revit Architecture 2014

4015 Downloads

I've been looking for Progress Lighting revit families and been unsuccessful for residential use. I'll watch to see if anybody downloads before offering any additional.

No Rating

Product Version: Revit Architecture 2013

4928 Downloads

Quickly modelled Copper Light pendant.

This familiy is face based so will host to your ceiling or any other host.

Pendant drop is an instance type parameter so you can simply duplicate the fitting and adjust the drops as needed like i did in the render.

Enjoy

Product Version: Revit MEP 2014

21795 Downloads

Pole lighting for sidewalks, adjustable height, resembles the old gas lamps.

Product Version: Unknown

15126 Downloads

Last one for the day.

Chrome Ceiling Pendant. Again with all the others, Ceiling drop & materials are all changable.

Face based family

enjoy

Product Version: Revit MEP 2014

12365 Downloads

Simple non-parametric lighting piece that sits in floor.

Product Version: Unknown

23557 Downloads

Ceiling Art that is ceiling based.

Product Version: Revit Architecture 2009

3276 Downloads

Patio String Lighting. It's not Parametric but its easy to change the cable length and number of lights and spacing by editing the family.

Product Version: Revit Architecture 2014

19528 Downloads

Based on the Rejuvenation Fixture Jefferson, this is a ceiling based light fixture in the style of a traditional schoolhouse light.  I have heard that it might be better to not be ceiling hosted so that if the ceiling changes, the fixture will remain.....

I have not adjusted the photometrics so don't rely on those.

No Rating

Product Version: Revit Architecture 2009

22553 Downloads

A ceiling hosted attic/ceiling access panel. Has two sizes predefined

Product Version: Unknown

14269 Downloads

Large chandellier light family based on the Sonneman brand 'Constellation Hedron' light fixture.

Based on the Sonneman spec, the geodesic dome form measures 45" in diameter with 40 LED bulbs.  

Modeled as a Generic Family.  Not face-based or ceiling hosted-- you'll need to set the elevation within your model.

The model DOES include lighting which will illuminate space in rendering programs.  The lighting does not utilize the actual IES files-- and is an estimated look using generic Revit lighting fixtures in the estimated locations of the light fixture lighting.

The handing distance is unfortunately not parametric at this time-- I haven't had time to adjust this value.  Feel free to make your own updates and share.  

For more on the Sonneman fixture, visit https://sonnemanlight.com/constellation-hedron-chandelier

No Rating

Product Version: Unknown

2025 Downloads

Parametric roof strip lighting, acts as skylight

Product Version: Revit Building 9.1

26937 Downloads

Wall lighting

No Rating

Product Version: Revit MEP 2015

3370 Downloads

A generic ceiling based model of a ceiling router, about 8" diameter. 

No Rating

Product Version: Revit Architecture 2016

2155 Downloads

Detail Ceiling yang tidak memerlukan 3D

Product Version: Unknown

4190 Downloads

This is a ceiling Access hatch/panel. you can change the dimensions and the materials of everything. It is ceiling based. 

Product Version: Unknown

20439 Downloads

Slope of ceiling is 9.09 degrees

No Rating

Product Version: Revit Architecture 2010

1867 Downloads