Biological Safety Cabinet

Product Version: Revit Building 5.1

2373 Downloads

Panametric Cabinet Door I've also used as a mirror over a bathroom sink.

No Rating

Product Version: Unknown

2051 Downloads

Media Cabinet - Corner

Product Version: Unknown

5812 Downloads

Corner China Cabinet created in RAC2010.

No Rating

Product Version: Revit Architecture 2010

6395 Downloads

This American Woodmark model is their double oven, 84" high, 2 butt doors, 1 drawer cabinet.   American Woodmark offers this cabinet in two widths: 27" and 30" and those are the two family types.   All doors and the drawer operate independently.   The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation. For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°. Close them the same way.

No Rating

Product Version: Revit Architecture 2013

4159 Downloads

Another component of the Farmhouse style Kitchen cabinets. This one has a single cabinet door.

Product Version: Unknown

16511 Downloads

This casework family is a model of American Woodmark's two doors, two drawers, four roll out trays base cabinet. The trays are not supposed to be adjustable, but in this model you can adjust the height of the top two trays. All components operate independently. Materials are pre-defined and assigned via casework subcategories. American Woodmark offers four widths which are included as family types. The URL parameter opens the catalog wherein this cabinet is found.

No Rating

Product Version: Revit Architecture 2012

5164 Downloads

This American Woodmark model is their double oven, 90" high, 2 butt doors, 1 shelf, 1 drawer cabinet.  American Woodmark offers this cabinet in three widths: 27", 30", and 33" and those are the three family types.  All doors and the drawer operate independently.  The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation. For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°.  Close them the same way.

No Rating

Product Version: Revit Architecture 2013

2959 Downloads

This is a contemporary recessed wall mounted medicine cabinet manufactured by Robern. Standard sizes are included as types. I'm nearly certain that I based the model on the catalog picture/ drawings rather than shop drawings/ so some assumptions were made. 

Product Version: Revit Architecture 2012

1784 Downloads

Wall based cabinet with a roll-down door. Fully parametric. Elevation is based at bottom of the unit so as to sit on the counter.

Revit 2019

No Rating

Product Version: Unknown

1193 Downloads

Wall Cabinet - 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

5993 Downloads

This American Woodmark model is their double oven, 96" high, 2 butt doors, 2 shelves, 1 drawer cabinet. American Woodmark offers this cabinet in three widths: 27", 30", and 33" and those are the three family types. All doors and the drawer operate independently. The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation. For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°. Close them the same way.

No Rating

Product Version: Revit Architecture 2013

3089 Downloads

This American Woodmark casework family is a narrow vertical tray storage unit.  It includes the tray divider and an adjustable shelf.  The door opens with an instance parameter.  The pre-defined materials are assigned with casework sub-categories.  American Woodmark offers this cabinet in a single width, 9", but does also offer a reduced 14" depth.  Both models are included as family types.  The URL opens the catalog wherein you can find this cabinet.

No Rating

Product Version: Revit Architecture 2012

4905 Downloads

This is a generic upper cabinet for quick plan layouts,  elevations, and blocked 3D views.  It is wall-hosted.  Length, height, and mounting height are adjustable.

There are no doors or any detail; just blocks.

Product Version: Revit Architecture 2008

1322 Downloads

This is a generic base cabinet for a rectangular island.  Use for quick plan layouts,  elevations, and blocked 3D views.  Length, height, and mounting height are adjustable.

There are no doors or any detail; just blocks.

Product Version: Revit Architecture 2008

2409 Downloads

This casework family is a model of American Woodmark's two doors, two drawers, two deep roll out trays, and one adjustable shelf base cabinet.  Materials are pre-defined and assigned via casework subcategories.  All movable components operate independently.  American Woodmark offers four widths and they are included as family types.  The URL parameter opens the catalog wherein this cabinet is found.

No Rating

Product Version: Revit Architecture 2012

4433 Downloads

Corner Wall Cabinet with Built in T.V, load you own picture and your ready to go.

No Rating

Product Version: Revit Architecture 2012

1951 Downloads

puck type under cabinet light with editable mounting height and finish.

No Rating

Product Version: Revit Architecture 2009

20842 Downloads

Wall Cabinet - 2 Door above microwave shelf

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

6596 Downloads

Wall Cabinet - Open

 *** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

3999 Downloads

Based on Brandon Dorsey's really great parametric 3- drawer base cabinet - all the bugs aren't out of this - but it has top drawer, drawer, and bottom drawer sizes.  May need to edit family to adjust some parameters - I am not as savy as Brandon.

No Rating

Product Version: Unknown

2389 Downloads

Upper Cabinet with a microwave shelf.

Product Version: Unknown

16584 Downloads

Generic upper cabinet with open shelves.  Parametric dimensions with on/off options for 1, 2, or 3 shelves.

No Rating

Product Version: Revit Architecture 2009

11744 Downloads

Line Based Euro-Style Upper/Lower Cabinet Casework that divides the length by the max_spacing automatically. Adjust max_spacing for number of cabinets.

Product Version: Revit Architecture 2011

16731 Downloads

Line Based Euro-Style Lower Cabinet Casework that divides the length by the max_spacing automatically. Adjust max_spacing for number of cabinets.

Product Version: Revit Architecture 2011

7788 Downloads

This casework family is American Woodmark's one door, one drawer, one adjustable shelf, one factory installed drawer accessory kit, one deep roll out tray base cabinet. American Woodmark offers four standard cabinet widths with eight drawer accessory kit permutations per width. I've made all permutations family types, so there are 32 types. The door opens, the tray slides out, and the drawer slides out. There is a control for sliding the accessory back to clear the drawer, although some of the accessories should not be moved. For example, the chopping block is designed to slide back into the cabinet so you have access to the drawer contents, but the molded plastic cutlery divider, shown here, sits in the bottom of the drawer and should not be moved.

Product Version: Revit Architecture 2012

7583 Downloads

• Base cabinet designed for the storage of 24" x 36" Paper.
• The thickness of the Counter top is compensated for and is easily adjusted

No Rating

Product Version: Revit Architecture 2008

17920 Downloads

FHR_no cabinet

No Rating

Product Version: Unknown

1859 Downloads

cabinet door family

Product Version: Unknown

3055 Downloads

Kitchen Cabinet - Linear Type (2.20 m) w/ complete accesories

Product Version: Revit Architecture 2017

18167 Downloads