Base Plate Connection - Single Row. Fully configuable, plate size, plate thickness, bolt location, bolt size, bolt spacing, number of bolts, grout pad thickness etc. Required to be hosted to an element (ex. beam or column) or a workplane.

No Rating

Product Version: Revit Structure 2013

4995 Downloads

The bucket bracket is to be used at the ends of a wood beam. Two downloads are available, one with the stand-alone connector, and one with it attached to the ends of a glulam beam. The glulam beam with integrated bucket bracket is easier to use, but if you wish to use different parameter settings for each side, or want to use the bracket on a different beam family, use the standalone bracket family file. All parameters are shared, so they can be used in schedules. The detail of the model has to be medium for the plates to appear, and fine for the bolts to appear.

See http://dylanbrowndesigns.com/resources/parametric-timber-connections-for-revit/ for an illustrative guide on how to use the connector.

This file was made in Revit 2018.

No Rating

Product Version: Unknown

529 Downloads

Parametric Detail Componenet. An improvement on the OOTB Bolt - Side Family. My biggest beef with this family has always been no washers! Instance parameter adds a washer to the head end or the nut end or both. Instance parameter adds a symbolic bolt hole thru the bolted assembly. Bolt shaft is also a instance parameter. I typically only use A307 3/8"Ø, A325 1/2"Ø, A325 3/4"Ø or A325 1"Ø bolts so these are the only types. Parameters exist though to add more. Type parameters are based on values from Portland Bolt. Revit 2016.

Product Version: Revit Structure 2016

2366 Downloads

This Stirrup Bracket is to be used at the top or bottom of a wood column. Two downloads are available. One with the stand-alone connector, and one with it attached to the bottom of a glulam column. The glulam column with integrated stirrup bracket is easier to use, but if you wish to place the bracket on the top of the column, or use in a different column family, the stirrup bracket family file should be used instead. All parameters are shared, so they can be used in schedules. The detail of the model has to be medium for the plates to appear, and fine for the bolts to appear.

See http://dylanbrowndesigns.com/resources/parametric-timber-connections-for-revit/ for an illustrative guide on how to use the connector.

This file was made in Revit 2018.

No Rating

Product Version: Unknown

3053 Downloads

The knife plate connector is to be used at the top or bottom of a wood column. Two downloads are available. One with the stand-alone connector, and one with it attached to the bottom of a glulam column. The glulam column with integrated knife plate is easier to use, but if you wish to place the knife plate on the top of the column, or use in a different column family, the knife plate family file should be used instead. All parameters are shared, so they can be used in schedules. The detail of the model has to be medium for the plates to appear, and fine for the bolts to appear.

See http://dylanbrowndesigns.com/resources/parametric-timber-connections-for-revit/ for an illustrative guide on how to use the connector.

This file was made in Revit 2018.

Product Version: Unknown

4757 Downloads

MIFAB MI-E-G Series electronic grease interceptor with powder epoxy coated interior and exterior, and 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket removable through the bottom. Interceptor complete with standard no hub inlet and outlet for flow through installation and gasketed lid secured with bolts.

No Rating

Product Version: Unknown

89 Downloads

Our Madison range comes with a high back and upholstered arms to ensure maximum comfort. Showwood feet available in Bleached Beech, Cherry, Natural Beech, Oak, Walnut and Wenge stains as standard, plus customers own stains.

Reversible cushions ensure even wear and prolong fabric life.Polished Timber Feet (Front) plus Castors (Rear) to aid manoeuvrability.The Extreme version is the same domestic looking settee with high back and elegantly curved arms to ensure maximum comfort yet constructed to benefit from all the safety features required for challenging environments. It is ergonomically designed to guarantee good posture. It has a reinforced frame with plywood skinning and plywood under bottom to add extra weight.Anti-tamper security fixings such as no visible staples and use of non-retractable screws.Metal back tacking has been removed - slip stitching where requiredExtreme feet fitted with non-retractable bolts and removable cushions for easy cleaning.Reversible cushions prolong the life of the upholsteryZipper tag over sewn.

(Created in Revit 2014)

Product Version: Unknown

10033 Downloads

MIFAB Series MI-HEL ____ helicopter port fuel interceptor constructed from high-strength 1/4” (6) plate steel, ASTM-A242, outlet vent connection, internal vent connection, gasketed access covers fastened with stainless steel bolts, 2” (51) fuel drain connection, 1” (25) fresh water supply connection with gate valve, back flow preventer, automatic water level float valve, external sight glass water level indicator with drain cocks, 2” (51) interceptor drain plugs, channel support rails and body corner lifting lugs. Interceptor shall be coated with a two-part epoxy interior and exterior coating.

No Rating

Product Version: Unknown

124 Downloads