This is a double door that has 3d panel with adjustable swing and door handle.

Product Version: Unknown

23745 Downloads

Fully parametric Door & Awning Window combination.  The whole component schedules as a window,  while the door is 'shared' and schedules as a door. 

Calculates and stores Vent area for Door & Window and Light area for Window,  in Family Parameters 'VentArea" and "LightArea" - so that they can be scheduled.

Product Version: Revit Architecture 2009

22197 Downloads

Single entrance door with changeable dimensions, feel free to edit the door in the editor. Changeable materials and original materials included.

Product Version: Revit Architecture 2015

4293 Downloads

Parametric Iron Grill Door (Burger Door)with Base Cover Family. Can adjust Width & Height. Base Cover Height can adjust easily & can be on/off by one click.

 If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks.

Product Version: Revit Architecture 2018

3169 Downloads

I was planning a hotel and couldn't find a communication door for adjoining rooms, so I made one from this family found on RevitCity. Door handles are correct, one handle for each room, thereby locking the other room out without permission.

Product Version: Unknown

3237 Downloads

Door with adjustable opening percentage and hidden line to show door pocketing into opening.  Note:  You may nead to adjust your odject styles to make the Hidden Lines under Doors Black instead of Blue.

No Rating

Product Version: Revit Architecture 2012

3295 Downloads

Door to replace panel in Curtain Wall

Single Glass Door with frame top and bottom

Pull handle inside and out

Product Version: Revit Architecture 2008

112203 Downloads

second version of the door family that can be opened in 3D views

a new version of the door. you can now change the materials and the angle parameter is in english.

Product Version: Revit Architecture 2009

33962 Downloads

The parametric door contains embedded threshold along with standard ironmongery required in a Sauna door.

Product Version: Revit Architecture 2014

6237 Downloads

The parametric door contains embedded threshold along with standard ironmongery required in a Staircase door.

No Rating

Product Version: Revit Architecture 2014

6610 Downloads

This is a single glass door with adjustable trim exterior and interior. The stiles and rails are individually adjustable. The awning window height can be adjusted. I have added common door sizes to the family types add and adjust, as you need to.

Product Version: Unknown

15052 Downloads

This is a single glass pocket door. The door can be changed so the glass is translucent. Sizing is a usual for any Revit object.

Product Version: Revit Building 9

16137 Downloads

Single flush Door hollow metal, with two types of door panels (Glass,Louver) and frames (Single rabbet, Double rabbet), fully parametric, textured_Family Types Catalog in attachment.

Product Version: Revit Architecture 2012

7427 Downloads

This is a face based door bell button. All materials are parametric.

The picture here is of the original door bell button from which this family is inspired !!

Product Version: Revit Architecture 2012

5271 Downloads

This American Woodmark casework family is their one door, one drawer, cutting board door rack kit base cabinet.  The cutting board is mounted inside the door for easy access.  American Woodmark installs the cutting board kit on 18" cabinets only, so that is the only family type.  The cutting board will not adjust its width if you change the cabinet width.

No Rating

Product Version: Revit Architecture 2012

5839 Downloads

double door can do 45, 90 180 degrees.  Swing Angle is per leaf. Width per leaf.

Product Version: Revit Architecture 2015

7765 Downloads

Exterior light, barn light, gooseneck

No Rating

Product Version: Revit Architecture 2017

13176 Downloads

Definately the best bifold door on Revit city!!!. Check it out and tell me if I'm wrong. It is fully parametric.There is a slight problem that need to be rectified.....I'll re-upload as soon as its fixed.

Please rate and leave comments. You can also give me ideas on what to model next!!!!.

I know the door leafs look shit. U can edit them and reload them into the main nest. Shouldn't be too much of an effort.

Chao guys.

Product Version: Revit Architecture 2011

66555 Downloads

McKeon top coiling fire door with egress pocket door.  The egress door is located in a pocket in the wall and when the system activates, it swings into position and the coiling door drops from above.  This family includes all elements as well as a 'closed' and 'open' position.  It is hosted on a face of a wall, more specifically the back of the pocket where the egress door is in.  Ceiling height and width are instance controlled parameters allowing you to set them specifically for each import.  It includes 2d linework details (copies from McKeon) for both side tracks in plan view and then the coiling mechanism above the ceiling in elevation and section views.

Product Version: Revit Architecture 2011

3005 Downloads

This is a perametric single door that can be adjusted to fit the detail level of your project. All components on door and be hiden or revealed through its perameters.

No Rating

Product Version: Unknown

343 Downloads

Single flush Door hollow metal, with two types of door panels (Glass,Louver) and frames (Single rabbet, Double rabbet), fully parametric, textured_Family Types Catalog in attachment. Graphical representation of fire rating is included.

Product Version: Revit Architecture 2012

6651 Downloads

Here is a file to have Door/Window/Gate schedule and associated door panels. the window was using door family template, the chain link fence was using curtain wall with gate.

Change Door tags:1. While placing the door, click “Tags” in the Option Bar,2. In “Loaded Tags And Symbols”, under “Doors” Category, click “Loaded Tags”, then, switch between “Door Tag-AAA”, and “Wdw Tag-AAA”.

To link parameters from a nested family to the host family you will need to do the following.1. Open the host family with the nested inserted.2. Click on the nested family.3. Click “Edit Type” in the Properties.4. The “Type Properties” window will be shown.5. Click the parameter that you want to associate with other parameter.6. Click the little button at the far right of the parameter line you want to change7. Select parameter out of list or click add parameter and recreate the parameter.When the parameter is linked there will be an (=) sign on the little button.

Make sure that the associated parameters are in the same Group, which means Text, or Dimension. If the parameter is a length, then it needs to have a value instead of 0’ 0”.

No Rating

Product Version: Revit Architecture 2015

1651 Downloads

Fully Parametric - Rabbet 1 & 2, Stop, Backbend 1 & 2, Backbend Fold, Face, Wall Stud, Sheathing 1 & 2.  Compatable with HM Door Frame for door details.

No Rating

Product Version: Revit Architecture 2008

1559 Downloads

Parametric Door with Door opening Sizes plus Structural opening sizes and an instance based Call button plate (Left or Right etc)

Product Version: Revit Architecture 2011

142700 Downloads

FULLY WOODEM AND GLASS MAIN DOOR WITH FULL PARAMETERS

Product Version: Revit Architecture 2017

6896 Downloads

Resize the door to any width, specify the number of panels you want and voila!

Product Version: Unknown

30356 Downloads

Garge door 8' high with an arched opening and windows

Product Version: Unknown

21423 Downloads

2' Door- Ivory Plastic

Adjustable Length/Height

Product Version: Unknown

12690 Downloads

Pintuan-ready to use, parametric door..enjoy..

No Rating

Product Version: Unknown

12888 Downloads

Wooden door for residential projects

Product Version: Revit Architecture 2010

41458 Downloads