model pattern - pebble pattern

Product Version: Unknown

21754 Downloads

.pat file for Board and Batten wall pattern (model patern).

The spacing in this file is set at 12".  If you want to increase the spacing, just edit the .pat file in Notepad and change the 12s to whatever you want the spacing to be.  Credit Robert Cloward for the original code.

Product Version: Unknown

792 Downloads

The pattern is currently scaled to 3x12, if you need something larger or smaller change the import scale. For example, a 6x24 tile would be imported at 2.00 scale.

To rotate the pattern to 45 degrees, fill a region then rotate using the rotate tool and then edit the boundaries to fix the edges.

If you are having trouble downloading the file, right click on the page of code and do a save as file. Set the type to all files and change the .txt to .pat. If .pat is already selected you may still need to erase it and type it in manually. If you save the file and it appears on your computer as a text file that opens with notepad, save that file as a .pat file and Revit should be able to import it as a hatch pattern.

Product Version: Unknown

5019 Downloads

Product Version: Unknown

962 Downloads

Plywood Model Pattern

Product Version: Unknown

5653 Downloads

2x2 Brick Pattern

Product Version: Unknown

17008 Downloads

Product Version: Unknown

18722 Downloads

Product Version: Revit Architecture 2020

10204 Downloads

drafting pattern - Pattern I ran across on an older blueprint. Used for rated walls. Shows up with gaps between the lines but prints fine.

Product Version: Unknown

1243 Downloads

No Rating

Product Version: Unknown

3393 Downloads

Fully parameter.

Product Version: Revit Architecture 2015

2000 Downloads

Fully parameter.

No Rating

Product Version: Revit Architecture 2015

2005 Downloads

This is a model type pattern for a stone veneer.  It has regular height coursing with random lengths.  The heights of the courses are 4", 6", 8" and 12."   It will course at 3', 7'-2", 8', 9', 10', 11', 12', 13' and 15.'  The pattern was drawn at 1/4 scale so when you create your model hatch you need to put in a scale of 4.  The pattern repeat is at 15' height.

Product Version: Revit Architecture 2013

7804 Downloads

Product Version: Revit Architecture 2017

895 Downloads

No Rating

Product Version: Revit MEP 2009

697 Downloads

Hi again

No Rating

Product Version: Unknown

105 Downloads

This is the good family version of a hexagon table, aluminum for a contemporary restaurant

No Rating

Product Version: Unknown

1612 Downloads

Hi again

No Rating

Product Version: Unknown

130 Downloads

Hi again

No Rating

Product Version: Unknown

195 Downloads

Hi Again

No Rating

Product Version: Unknown

195 Downloads

Hi again

No Rating

Product Version: Unknown

171 Downloads

Hi again

No Rating

Product Version: Unknown

103 Downloads

Hi, Again

No Rating

Product Version: Unknown

89 Downloads

Hi again

No Rating

Product Version: Unknown

295 Downloads

Hi Again

No Rating

Product Version: Unknown

248 Downloads

Hi again

No Rating

Product Version: Unknown

130 Downloads

Import drafting scale at .25 for a good clarity level.

Product Version: Revit Building 9.1

4201 Downloads

its fully parametric

Product Version: Revit Architecture 2017

10557 Downloads

Series 27 V-Pattern Cast Copper Silicon Alloy Strainers are designed to protect system components from dirt, rust and other damaging debris in the piping system. This series is ideal for beverage dispensers, ice cube machines, dental equipment, instrument control systems and similar applications.

No Rating

Product Version: Revit MEP 2014

100 Downloads

5" Designer tile (.pat) model based tile pattern can be used in revit and other supported software.

How to use in revit

1.Copy the text. open note pad. Paste it and save with .pat(dot pat) extension

2. Open material tab then surface pattern then model pattern-- New--load the pat.

No Rating

Product Version: Unknown

1079 Downloads