Daniels International Sharpsmart Disposal (multiple types). Face-based

Product Version: Revit Architecture 2014

4063 Downloads

Parametric width, length, height, thickness, material, support number, support offset, support material.

-BYU Revit Team

No Rating

Product Version: Revit Architecture 2016

1027 Downloads

Here is an fully parametrical breastwork support with break

Enjoy

No Rating

Product Version: Revit Architecture 2013

391 Downloads

Technogym

No Rating

Product Version: Revit Architecture 2017

1106 Downloads

This has correct rfa file.

No Rating

Product Version: Revit Structure 2011

1835 Downloads

For leading cables through the roof membrane on flat roofs in a watertight manner. E.g. at solar panels, air conditioners and other electrical equipment.

No Rating

Product Version: Revit Architecture 2019

47 Downloads

PDL  56E1-S external termination point  (ETP)  fibre optic cable to the home  (FTTH) wall box.

Wall based,  white plastic single gang enclosure.

MEP connection -  communications.

CBI (NZ) 78-11  -  cable communication systems 

Revit 2018

No Rating

Product Version: Unknown

505 Downloads

This bracing is sized for 25" and 30" countertops.

No Rating

Product Version: Revit Architecture 2011

1929 Downloads

For leading cables through the roof membrane on flat roofs in a watertight manner. E.g. at solar panels, air conditioners and other electrical equipment.

No Rating

Product Version: Revit Architecture 2019

34 Downloads

Humanscale: 5G90091F Keyboard System     

Product Version: Revit Architecture 2008

3392 Downloads

For leading cables through flat roof surfaces with bitumen or foil (single ply) roof membranes in a watertight manner. E.g. at solar panels, air conditioners and other electrical equipment. The detachable bends makes installation flexible and easy to handle.

No Rating

Product Version: Revit Architecture 2019

85 Downloads

Wall Based Detail

No Rating

Product Version: Revit Architecture 2009

2133 Downloads

M100 offers limitless opportunities in recessed, semi-recessed as well as suspended and surface mounted extrusions. Multiple, different fluorescent and MR 16 modules, track, as well as one of the strongest continuous run joining systems in the lighting industry, coupled with a variety of available connectors, allow the user total freedom of imagination. Vertical as well as horizontal mounting is possible, as are installations in non-accessible ceiling situations. The M100 system encourages a harmonious solution to any project challenge.

Product Version: Revit Architecture 2010

15392 Downloads

For leading cables through flat roof surfaces with bitumen or foil (single ply) roof membranes in a watertight manner. E.g. at solar panels, air conditioners and other electrical equipment. The detachable bends makes installation flexible and easy to handle.

No Rating

Product Version: Revit Architecture 2019

34 Downloads

Parametric Canopy. Horizontal Supports are Offset inwards rather than to the sides.

No Rating

Product Version: Revit Architecture 2015

2298 Downloads

Adjustable aux channel.

Parametric with all-thread hangars from ceiling and supports from cabinets below or stanchion post.

Splice, wall mount and end caps included

No Rating

Product Version: Revit Architecture 2017

701 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

610 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

334 Downloads

countertop bracket made at nohs

No Rating

Product Version: Revit Architecture 2014

3235 Downloads

This end panel is sized for 25" and 30" countertops.

No Rating

Product Version: Revit Architecture 2011

1987 Downloads

MIFAB® Series MC-56 wall mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron adjustable wall plate with mounting studs and fixture leveling hardware

No Rating

Product Version: Unknown

45 Downloads

NEO® Systems- A new generation of interior luminaires constructed of glass and polished aluminum. Neo® is developed with a dedicated systems approach for total design freedom and specification flexibility for suspended, ceiling mount or surface mount applications. Precision reflector and Microprism diffuser technology is utilized to optimize output of T5 fluorescent sources. The utilization of all visible light is the key to the NEO® luminaire philosophy.

Product Version: Revit Architecture 2010

12143 Downloads

100% recycled rubber, UV resistant  Strut (on C5-B) - 14 gauge galvanized steel (1 5/8” wide x 7/8” tall)

No Rating

Product Version: Unknown

29 Downloads

POOL SPOT

Art. S.3693 12 MODULES LED RGBW (W=6000K)  24VdcRated luminaire luminous flux: 430lmRated input power: 31WLuminaire efficacy: 14lm/WRequires remote ON-OFF power supply or Dimmable power supply CELUMINAIRE TYPESubmersion luminaire. IP rating IP 68MATERIAL CHARACTERISTICSTalc-filled technopolymer housing. Marine grade stainless steel AISI 316L front trim 2 mm thick. A4 grade Stainless Steel screws with 2,5-3% molybdenum content whitch increases the resistance against corrosion. Toughened transparent glass 4mm thick for MICROPOOL SPOT, 8mm MINIPOOL SPOT and POOL SPOT. Mechanical resistance IK 10 Silicone gaskets.LIGHTING PERFORMANCEThe spectral distribution of the light is intended to change the appearance of the scene or object lit. Not intended for use in other applications. Lamp  fixed position. LOR -- WIRINGPOOL SPOT requires a FLANGE accessory to anchor the fitting to the bottom of pools or fountains. The stainless steel flange is supplied with fastening screws, both for fixing the fitting to the flange and for the anchorage to the bottom of the pool. Should the fixation with screws be impossible, the weight of the accessory still allows to keep the luminaire sitting on the bottom of the pool. Single cable entry with M20 brass cable gland. Luminaire hard wired with 6 m. cable (5 x 1mm²) cable type H07RN8-F for MICROPOOL RGBW, 6 m. cable (5 x 1mm²) cable type H07RN8-F for MINIPOOL RGBW and 8 m. cable (5 x 1mm²) cable type H07RN8-F for POOL RGBW closed by cable gland and sealed with B component epoxy resin, wired internally protected by silicon sheaths Isolation: CLASS III . Available colours: Stainless steel (cod.19). Weight: 4.48 Kg LED circuit included. Not suitable to install outside the water.The luminaire cannot be installed out of the water. Not compatible with pools containing salt water and that are treated with salt water chlorinationPOOL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

972 Downloads

No Rating

Product Version: Unknown

43 Downloads

Trash /waste bin with tray top holder for restaurant

No Rating

Product Version: Revit Architecture 2014

8507 Downloads

Dimensions - 2.50” Height x 12” Width x Length as specified in chart

Material

Base - 100% recycled rubber, UV resistant

Maximum Load - 1,200 lbs. - for each 12” long support

No Rating

Product Version: Unknown

22 Downloads

Base with 14 gauge Galvanized Channel (13/16” high)

No Rating

Product Version: Unknown

37 Downloads

Combination rack for 6 bedpans and 6 urinals with drip tray. Not parametric

Product Version: Revit Architecture 2013

4104 Downloads

CRL (C.R. Laurence) HRF 14 BS rigid combination fastener with custom 4 point spider anchor. Can be used with varying glass sizes from 1/2" to 1 1/16" and variable system depth.

 http://www.crlaurence.com/crlapps/showline/offerpage.aspx?Productid=41982&GroupID=21214&History=39327:9307:13453:14103&ModelID=21214

Product Version: Revit Architecture 2012

8059 Downloads