I think I've corrected a little problem with the door not adjusting properly with a type change.  This is American Woodmark's 1 door, 1 drawer, 1 roll out tray divider base cabinet.  It comes in two widths:  12" and 15".  The tray has three compartments at the larger size and two at the smaller.

No Rating

Product Version: Revit Architecture 2013

3048 Downloads

7' Black Chatsworth patch panel rack with cable management on each side.

Product Version: Revit Architecture 2008

3547 Downloads

Simple C-Channel Frame with Cable Supports. Fully Parametric

No Rating

Product Version: Revit Architecture 2015

5132 Downloads

Simple canopy. C Channel frame with 6 cable supports

No Rating

Product Version: Revit Architecture 2015

6591 Downloads

Fast food tray with a burger, drink and chips. (3/3)

This file is just the burger, download the other components that can be found on my profile. 

Tags - chips , fast food , drink , coke , burger , mcdonalds , tray , food , cup 

No Rating

Product Version: Revit Architecture 2017

4964 Downloads

 This support is used where there is a need for more knee space.

No Rating

Product Version: Revit Architecture 2013

1722 Downloads

This American Woodmark casework family is a narrow vertical tray storage unit.  It includes the tray divider and an adjustable shelf.  The door opens with an instance parameter.  The pre-defined materials are assigned with casework sub-categories.  American Woodmark offers this cabinet in a single width, 9", but does also offer a reduced 14" depth.  Both models are included as family types.  The URL opens the catalog wherein you can find this cabinet.

No Rating

Product Version: Revit Architecture 2012

4972 Downloads

3 Phase Industrial Socket with Switch. (IT Racks, Kitchen Equipments and can be Cable Tray Mounted).No of phases and family category can be adjusted.Make sure you add 2D Annotation separately for floor plan.

No Rating

Product Version: Revit MEP 2019

655 Downloads

Fast food tray with a burger, drink and chips. (2/3)

This file is just the cup drink, download the other components that can be found on my profile. 

Tags - chips , fast food , drink , coke , burger , mcdonalds , tray , food , cup 

Product Version: Revit Architecture 2017

5912 Downloads

Cable Railing with flat stock balusters and top rail. Includes angled baluster at corners. 2 options: handrail and guardrail without handrail.  It's not a family, it's a project, so you just have to copy/paste the railing into your project. I added a material parameter to the balusters. The materials of the rails can be edited in the railing properties window.

Product Version: Revit Architecture 2014

44829 Downloads

This casework family is an American Woodmark base cabinet with two doors, one deep roll out tray, one drawer, and an adjustable shelf.  The doors can be opened individually, the tray can be rolled out, the drawer can be pulled open, and the shelf can be moved up and down.  The shelf even has clips holding it in place!  The URL opens the catalog that contains the three available widths.  The pre-defined materials are assigned through casework sub-categories.

No Rating

Product Version: Revit Architecture 2012

5730 Downloads

This model is a face based model for the vertical plate.

Both plates are in a diamond shape and there is a cable between them.

There are 2 parameters - one adjust how far from the wall the bottom / horizontal plate is; the other adjusts how far below the vertical plate the bottom plate is.

Stainless Steel Material. 

Product Version: Revit Architecture 2011

18981 Downloads

This American Woodmark casework family is a model of their one door, one drawer, one roll out tray divider base cabinet.  They offer two widths, 12" and 15", and those are included as family types.  The 12" has a tray divider with two compartments (one divider) while the 15" sports a three compartment divider (two dividers).  All movable components operate with instance parameters.  The trays are not adjustable beyond pulling them out.  There are actually two trays that get swapped in and out with your selection of cabinet width.

I've upgraded this cabinet.  It's a Revit 2013 model now and I've fixed a problem with the door.  The upgraded cabinet is a separate download.

No Rating

Product Version: Revit Architecture 2012

5970 Downloads

This is a casework family model of American Woodmark's 1 door, 1 drawer, 1 deep roll out tray, 1 adjustable shelf base cabinet.  The door, drawer, and tray all operate independently.  The shelf is vertically adjustable and is held in place with clips.  The five widths offered by American Woodmark are included as family types.  Materials are pre-defined and assigned using casework subcategories.

I have updated this model.   It has more subtle engraving on the doors, curved handles, and the door opens more reliably.   Open it in angular increments of something less than 90°.   For example, if you want it opened to 90°, do it in two operations with the first angle 70° and then go to 90°.   Close it the same way.

Product Version: Revit Architecture 2013

3882 Downloads

Wall hosted chain support for holding up your roof or awning or whatever you like. Fully Parametric that automatically adjusts chain length and angle based on a couple parameters that dictate where the supports will be.

No Rating

Product Version: Revit Architecture 2013

5564 Downloads

Modern Martini Side Table w/ Tray Top.  Made in the USA,  quick ship.   Designed by Brad Ascalon.

HighTower Group

No Rating

Product Version: Unknown

6280 Downloads

3 Phase Unswitched Industrial Socket. (IT Racks, Kitchen Equipments and can be Cable Tray Mounted).No of phases and family category can be adjusted.Make sure you add 2D Annotation separately for floor plan.

Product Version: Unknown

543 Downloads

QED Pendant with uplight module. Steel and aluminum body with opal acrylic diffuser. Cable suspended, and hosted to a ceiling. Adjustable cable height.

Product Version: Revit Architecture 2009

12247 Downloads

Heres a Fully parametric shower tray and enclosure modelled for a recent job. The tray is changable in width and depth. The screen and screen framing changes when altering width & depth.

Shower tray material, Screen, Screen frame, Handle, and Trap materials are all changable.

Hope you like it.

Comments are welcome. Cheers

Product Version: Revit MEP 2014

72362 Downloads

This casework family is American Woodmark's one door, one drawer, one adjustable shelf, one factory installed drawer accessory kit, one deep roll out tray base cabinet. American Woodmark offers four standard cabinet widths with eight drawer accessory kit permutations per width. I've made all permutations family types, so there are 32 types. The door opens, the tray slides out, and the drawer slides out. There is a control for sliding the accessory back to clear the drawer, although some of the accessories should not be moved. For example, the chopping block is designed to slide back into the cabinet so you have access to the drawer contents, but the molded plastic cutlery divider, shown here, sits in the bottom of the drawer and should not be moved.

Product Version: Revit Architecture 2012

7762 Downloads

No Rating

Product Version: Revit Architecture 2017

133 Downloads

Pipe support assembly created for a SMEP modular residential project.

Consisting of a strut (length can be schedule), a strap, and angles.

Oriented from the strut's left end. The straps can be aligned to pipe centres.

Let me know of any improvements you hvae.

Product Version: Revit MEP 2012

3810 Downloads

Product Version: Revit Architecture 2011

3489 Downloads

Parametric

Product Version: Revit Architecture 2013

9848 Downloads

No Rating

Product Version: Revit Architecture 2015

4182 Downloads

BOWMAC Post and Bearer support B197, metric, NZ

Product Version: Revit Architecture 2008

1006 Downloads

This is a generic shelf and pole family that has 3 sizes with and without the pole for use in most closet shelving conditions.  the cleats adjust themselves accordingly for the pole visibility. The vertical support family is used between the shelving and has is flexible in all directions with a front clip.

Product Version: Revit Building 9.1

4499 Downloads

This is a generic shelf and pole family that has 3 sizes with and without the pole for use in most closet shelving conditions.  the cleats adjust themselves accordingly for the pole visibility. The vertical support family is used between the shelving and has is flexible in all directions with a front clip.

No Rating

Product Version: Revit Building 9.1

2786 Downloads

Decorative natural log with support

model by Ilya Sibiryakov

RA - 2010

Check out My projects made in Revit

Product Version: Revit Structure 2010

7951 Downloads

These family was made for showing barrier cables around a parking deck.

No Rating

Product Version: Revit Architecture 2013

1490 Downloads