 |
Everything is parametric including:
- Louver angle, thickness, and spacing
- Awning cable can be adjusted (height & length) as required including the mounting plate
- As many sections of louvers as you want as long as you start with at least 2 mounts.
- Length, Width, and Height of the unit itself.
This is saved in Revit 2018 format |
|
Product Version: Revit Architecture 2017
6096 Downloads
|
|
 |
Series ISCA-132-L/R/2 Industry Standard single vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, 4 in. (102mm) no hub side inlet(s), epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements. |
No Rating |
Product Version: Revit MEP 2014
37 Downloads
|
|
|
 |
The object is fabricated to support ducts especially when wall mounted bracket is not relevant |
No Rating |
Product Version: Unknown
157 Downloads
|
|
|
 |
Series ISCA-132-D Industry Standard back-to-back vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, 4 in. (102mm) no hub side inlet(s), epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements. |
No Rating |
Product Version: Revit MEP 2014
50 Downloads
|
|
|
 |
2x3x6' loom with just the wefts and support bars |
|
Product Version: Revit Architecture 2020
677 Downloads
|
|
|
 |
Parametric: - support numbers - overhang |
|
Product Version: Revit Architecture 2009
11541 Downloads
|
|
|
 |
PA speaker with length and support as parametric...!
With Annotation |
|
Product Version: Revit MEP 2015
2605 Downloads
|
|
|
 |
spider Crane with parametric Boom Extension. I did not have time to model the hook cable and may need to add few parameters depending on your needs. I have decide to create one as I have not seen a parametric spider crane quiet as good as this. Hopefully it will help create better for future needs. Enjoy! by Vision Artititech |
|
Product Version: Unknown
1568 Downloads
|
|
|
 |
Wood frame stair with 100mm support beam |
|
Product Version: Revit Architecture 2017
1605 Downloads
|
|
|
 |
This is a partially-parametric recessed shelving unit - intended support system is walls built around it within the project. |
|
Product Version: Revit Architecture 2011
8411 Downloads
|
|
|
 |
A rough model of an Excalibur Dehydrator (9-tray model). |
No Rating |
Product Version: Revit Architecture 2013
583 Downloads
|
|
|
| |
Support bracket for linear counter |
|
Product Version: Unknown
2240 Downloads
|
|
|
 |
Kohler - K-3340
Undertone� Undercounter Prep Tray Kitchen Sink, 21 1/4" x 15 3/4" x 2" |
No Rating |
Product Version: Unknown
1092 Downloads
|
|
|
 |
HI GUYS WE ARE FROM SINGAPORE! WE HOPE TO CREATE COOL ITEMs THAT IS UNIQUE. ITEMs WE CREATED ARE MOSTLY MODERN ZEN. PLEASE SUPPORT US. :) |
|
Product Version: Unknown
903 Downloads
|
|
|
 |
Hi all, this is an industrial crane that i just finished. I am using it for visualization of a renovation project which will repurpose existing industrial cranes.
The thing is, that it´s completely parameterized, you can alter the length of the main beams, the slider position, and even the height of the hook and diameter of the cable..and of course materials. All parameters are mapped, so you don´t have to open the family to change them, just do so from the project browser once the crane is selected.
Enjoy, and happy rendering (or whatever you want!) |
|
Product Version: Revit Architecture 2013
10835 Downloads
|
|
|
 |
False Ceiling Quotation/ Design/ Installation/ Technical Support;
Web: wingyipengineering.com
Email: Wingyip@wingyipeng.com
Tel: 3124 1222 W. S. Chan ( Tony ) |
No Rating |
Product Version: Revit Architecture 2019
531 Downloads
|
|
|
 |
Precast concrete. Parametric column with 2 corbels. Support for beams and floors. |
No Rating |
Product Version: Revit Architecture 2013
3492 Downloads
|
|
|
 |
Mostly Parametric and Materials
Base and Support arm on /off
Made for a project Hope it works for you
just trying to give back !
Revit 2017 |
No Rating |
Product Version: Revit Architecture 2016
2948 Downloads
|
|
|
| |
Metal framed with curved support brackets and corrugated roof sheeting structure for sun control not parametric |
|
Product Version: Revit Architecture 2008
4073 Downloads
|
|
|
 |
Please ignore the grass I needed the right lighting for the sofa... I designed this completely from my head. Behind the back cushions there is rolled back support for extra comfort. |
|
Product Version: Revit Architecture 2012
14264 Downloads
|
|
|
 |
Bleacher sim. to Jaypro 4 Rows Tip and Roll Bleachers.
4 families to adjust length - 7 1/2 ft, 15 ft, 21 ft and 27 ft.
Adjust material for the planks and support. |
|
Product Version: Unknown
21830 Downloads
|
|
|
 |
False Ceiling Quotation/ Design/ Installation/ Technical Support;
Web: wingyipengineering.com
Email: Wingyip@wingyipeng.com
Tel: 3124 1222 W. S. Chan ( Tony ) |
No Rating |
Product Version: Revit Architecture 2019
2005 Downloads
|
|
|
 |
False Ceiling Quotation/ Design/ Installation/ Technical Support;
Web: wingyipengineering.com
Email: Wingyip@wingyipeng.com
Tel: 3124 1222 W. S. Chan ( Tony ) |
No Rating |
Product Version: Revit Architecture 2019
1756 Downloads
|
|
|
 |
False Ceiling Quotation/ Design/ Installation/ Technical Support;
Web: wingyipengineering.com
Email: Wingyip@wingyipeng.com
Tel: 3124 1222 W. S. Chan ( Tony ) |
No Rating |
Product Version: Revit Architecture 2019
583 Downloads
|
|
|
 |
False Ceiling Quotation/ Design/ Installation/ Technical Support;
Web: wingyipengineering.com
Email: Wingyip@wingyipeng.com
Tel: 3124 1222 W. S. Chan ( Tony ) |
No Rating |
Product Version: Revit Architecture 2019
1763 Downloads
|
|
|
 |
False Ceiling Quotation/ Design/ Installation/ Technical Support;
Web: wingyipengineering.com
Email: Wingyip@wingyipeng.com
Tel: 3124 1222 W. S. Chan ( Tony ) |
|
Product Version: Revit Architecture 2019
1191 Downloads
|
|
|
 |
False Ceiling Quotation/ Design/ Installation/ Technical Support;
Web: wingyipengineering.com
Email: Wingyip@wingyipeng.com
Tel: 3124 1222 W. S. Chan ( Tony ) |
No Rating |
Product Version: Revit Architecture 2019
1791 Downloads
|
|
|
 |
False Ceiling Quotation/ Design/ Installation/ Technical Support;
Web: wingyipengineering.com
Email: Wingyip@wingyipeng.com
Tel: 3124 1222 W. S. Chan ( Tony ) |
No Rating |
Product Version: Revit Architecture 2019
745 Downloads
|
|
|
| |
Wood and steel support for linear work counter |
No Rating |
Product Version: Unknown
1812 Downloads
|
|
|
 |
False Ceiling Quotation/ Design/ Installation/ Technical Support;
Web: wingyipengineering.com
Email: Wingyip@wingyipeng.com
Tel: 3124 1222 W. S. Chan ( Tony ) |
|
Product Version: Revit Architecture 2019
1253 Downloads
|
|
|
Search