A corner shelf for use in kitchens.

5 Shelves

Parametric 

Product Version: Revit Building 7

16940 Downloads

This is a completely customizable Teknion ie workstation. I added in the computer, baffle, books, shelves and chair via extrusions and Revit families. I'm new at creating things so it's not perfect...

Product Version: Revit Architecture 2009

7748 Downloads

Needed a criss cross bookcase for an assignment I'm doing and made this one, might be usefule for someone else too :)

2380h x 2650w x 300d and shelves are 40 thick

Product Version: Revit Architecture 2011

9615 Downloads

Parametric Values include dimensions, number of shelves, and wheter one of the doors is opened or not. 

Door handles only go up to a specified height, so it can be used for small cabinets and big ones. All instanced (I use them to furnish industrial kitchens)

No Rating

Product Version: Revit Architecture 2009

3578 Downloads

Modern but simple wall shelf.

I've added a number of different dimension parameters to this, so all three shelves even though joined can change in height and width. materials changable too

last one for today

enjoy

Product Version: Revit MEP 2014

16484 Downloads

This casework family is over the top!  There are the usual casework dimensions, but in addition, there are instance parameters to open the doors, pull out the top drawer, and slide out the two shelves hidden behind the doors, all individually controlled.  There are dedicated materials assigned by casework subcategories.  The model is replete with pots and pans sitting on the sliding shelves.  There are ten predefined widths.  At the narrower sizes, you'll see the pots and pans sticking out through the cabinet sides, so if you want, for instance, a 21" unit, you'll have to edit the family to remove or reposition them.  The unit is modelled on the American Woodmark line of cabinets.  The properties URL will take you to the American Woodmark web site.  This is a complex model.  I have tested it thoroughly, but if there are any difficulties, please leave a note for me.

I have updated this model.  It has more subtle engraving on the doors, curved handles, and the doors open more reliably.  Open them in angular increments of something less than 90°.  For example, if you want them opened to 90°, do it in two operations with the first angle 70° and the next 20°.  Close them the same way.

Product Version: Revit Architecture 2013

7367 Downloads

With or without doors or back panel. Matrix of shelves dependant on unit height. Dimensiones parametrizadas

Armario o estantería, puertas y fondo apagables, matriz de estantes dependiente de altura del mueble.

Product Version: Revit Architecture 2013

16181 Downloads

Dark and Light colored woods, 4 large cabinets, 8 small cabinets, 2 large glass cabinets with 3 shelves per cabinet, 6" Deep for a built in effect.

No Rating

Product Version: Revit Architecture 2010

5868 Downloads

A simple control room/ studio control console. For schematic design only - the width can be adjusted slightly, but too much shrinking/stretching will make the object look funny. there are shelves for monitors and equipment.

Product Version: Revit Architecture 2012

6867 Downloads

Parametric Storage Shelf.  Select from 36" or 72" height.  The second and fourth shelves height can also be adjusted.

Product Version: Revit Architecture 2014

27844 Downloads

Modern Bookcase: Shelves sculpted in shape of tidal wave

Ascending & descending curves at opposite ends as each shelf level increases

Visit my website at http://www.4u2cdesign.com

Product Version: Revit Architecture 2010

2213 Downloads

Basic Puck Light,  Set the height or align to the bottom of your cabinets or shelves. 

Add it to your cabinet families.

Enjoy!! 

Product Version: Revit Architecture 2017

8210 Downloads

Product Version: Revit Structure 2018

1305 Downloads

Simple wall mounted plate rack  with 2 shelves for plates and one regular shelf. Fully parametric - posts to divide the plates change to match the cabinet width.

No Rating

Product Version: Revit Architecture 2016

2642 Downloads

Modern Entertainment Center for Multi-Media Equipment

Solid to Void Geometry with Vert Alum Rods and Glass Shelves - Main Unit is made of Blue Plastic Laminate

Visit my website at http://www.4u2cdesign.com

No Rating

Product Version: Revit Architecture 2010

2847 Downloads

adaptation of "Linebased Shelve x* cm" uploaded by Hamseb

Line based

2 or 5 shelves

height, depth length instance based

http://vtourinteractive.webs.com/

No Rating

Product Version: Revit Architecture 2010

5840 Downloads

Book shelf 771, with a few improvements.  Added a toe kick, added a back to the bookcase, and added some parameters to control the width and height of the shelves.  Comments welcome. 

Product Version: Revit Architecture 2009

40895 Downloads

Book shelf 772 - now with even more parameters!  Adjust width, height, depth, and number of shelves (from 1 to 6).  Books can be turned on and off. 

Update: In response to some comments about the file size, I've uploaded a version of this this that's been slimmed down significantly.  Appearance and function are still the same. 

Product Version: Revit Architecture 2010

66161 Downloads

Parametric Storage Shelf.  Select from 36" or 72" height.  The second and fourth shelves height can also be adjusted.

This is an updated version that is type based.  This one works better than the one I previously posted.

Product Version: Revit Architecture 2014

10482 Downloads

Download: http://bimobject.com/en/hyllteknik-en/product/fsslw7wsonse  

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app 

The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1

Product Version: Unknown

3610 Downloads

This is a wall based oven tower with one extra large oven on the bottom, 2 smaller ones in the middle and shelves on the top, there are 2cversions closed and with the bottom open, the drawer on the bottom is part way open in both. the third file is the open tower with an added light built in as the Heating Coil thing you may have to play with the w/lm in the properties for rendering to look right it is a modern design (the top handles were done like they are intentionally)

Product Version: Unknown

23039 Downloads

Wall based shelf ^parametric

Hidden Instance parameter displays shelf in plan as dashed lines

Shelves Instance paramter displays shlef in elevation as dashed lines even when it is behind another object as long as the invisible line passes the object in front

Shelf can be offset from wall

No Rating

Product Version: Revit Architecture 2015

5776 Downloads

Aviator wing desk as seen on www.restaurationhardware.com

"Inspired by streamlined World War II fighter planes, our desk is a shining swoop of metal, its shape mimicking the bent wing of a plane. Poised as if for take-off, it features a polished aluminum patchwork exterior accented with steel screws, built around a solid hardwood frame. 3 canvas-lined shelves offer ample storage."

Revit 2012

Product Version: Unknown

9553 Downloads

EDIT:  new 2014 version here--http://www.revitcity.com/downloads.php?action=view&object_id=15176

It's much improved.

Old info:

Adaptation of the basic shelving unit, with some randomized extrusions plopped down on the shelves.  Scalable to a degree, 4-6' aprox height.  Looks reasonable in array.

Books only visible at "fine" detail level.  Shelving is bare at medium/coarse.

Product Version: Revit Architecture 2010

63444 Downloads

FIXED

Wall based, double door opening & shelf for a cool room display for a bottle shop or store.

Glass door with stainless steel frame, shelving and handle. 4 shelves that with heights that adjust automatically.

Height, width, offset from floor, shelf depth, handle height and handle size are all PARAMETRIC.

Product Version: Unknown

14304 Downloads

This casework family is a model of an American Woodmark wall cabinet.  It sports two doors that can be opened individually, and three adjustable shelves with clips.  The materials are pre-defined and assigned through casework subcategories.  The URL opens the catalog wherein this cabinet can be found.  American Woodmark offers two widths and both are family types.

Product Version: Revit Architecture 2012

11045 Downloads

This casework family model is of an American Woodmark wall cabinet.  It has one reversible operating door and three adjustable shelves.  The materials are pre-defined and assigned using casework subcategories.  The URL parameter opens the American Woodmark wall cabinets catalog wherein this cabinet can be found.  The five widths offered by American Woodmark are included as family types.

Product Version: Revit Architecture 2012

9181 Downloads

The Brookfield 60", double sink, Antique Black vanity by James Martin Furniture features hand-carved accenting filigrees and raised panel doors. Two doors, on either side, open to shelves for storage below and three center drawers, made up of a lower double-height drawer and both middle and top standard drawers, offer additional storage space. The look is completed with Antique Brass finish door and drawer pulls. Each cabinet is configured to work with our variety of either 2cm, 3cm, or a 4 cm countertops. The matching decorative wood backsplash is included.

No Rating

Product Version: Revit Architecture 2020

5933 Downloads

A sliding archive system shelves, for hunging big formats (like A0 sheets), brought from real life to digital world, by looking a manufactured unit by the paraguayan company Felipe Aghemo.

The parts have standart 3105xmm lenght, 900mm or 1350mm width, and 2170mm height; but the composition and materials are fully parametric.

Manufactered by Felipe Aghemo. Country: Paraguay.

Modeled by dufb. Country: Brazil.

============

Um sistema de prateleias/arquivos deslizantes, para pendurar grandes formatos (do tipo A0), trazido da vida real para o mundo digital, a partir de produto fabricado pela empresa paraguaia Felipe Aghemo.

Os módulos tem tamanho padrão de 3105xmm (altura), 900mm ou 1350mm (largura), e 2170mm (altura); mas a composição de quantidades de módulos e materiais de acabamento são inteiramente parametrizados.

Fabricado por Felipe Aghemo. País: Paraguai.

Modelado por dufb. País: Brazil.

No Rating

Product Version: Revit Structure 2017

1141 Downloads

A sliding archive system of shelves for small formats (like A3, A4) and/or books, brought from real life to digital world, measured from a manufactured unit by the paraguayan company Felipe Aghemo.

The parts have standart 3180xmm lenght, 403 or 767mm width, and 2240mm height. The composition and materials are fully parametric.

Manufactered by Felipe Aghemo. Country: Paraguay.

Modeled by dufb. Country: Brazil.

============

Um sistema de arquivos deslizantes, com prateleiras para pequeno formatos (A3, A4) e/ou livros, trazido da vida real para o mundo digital, a partir de produto fabricado pela empresa paraguaia Felipe Aghemo.

Os módulos têm tamanho padrão de 3180xmm (comprimento), 403 ou 767mm (largura), e 2240mm (altura). A composição de quantidades de módulos e materiais de acabamento são inteiramente parametrizados.

Fabricado por Felipe Aghemo. País: Paraguai.

Modelado por dufb. País: Brazil.

Product Version: Revit Architecture 2017

1488 Downloads