Line based parametric wood plank fence

Product Version: Revit Architecture 2013

5769 Downloads

Fully parametric swinging barn door.

Product Version: Revit Architecture 2020

2355 Downloads

Fully Parametric road guard rail. line based

Product Version: Revit Architecture 2013

7804 Downloads

Updated my original upload with the ability to slope the fence with a delta elevation parameter. Also added flip controls to change direction of the fence

Product Version: Revit Architecture 2013

23824 Downloads

Fully Parametric radial arrayed floor mounted seating. adjust seat height, width, depth and if seat is up or down aswell as radius to front edge of chair and the total array angle. Also materials.

Product Version: Revit Architecture 2013

10289 Downloads

Fully Parametric radial arrayed floor mounted seating. adjust seat height, width, depth and if seat is up or down aswell as radius to front edge of chair and the total array angle. Also materials.

Product Version: Revit Architecture 2013

5122 Downloads

Fully parametric flat/single slope trellis for exterior site improvements.

All parameters have been organized and sorted by importance.

Product Version: Revit Architecture 2016

8507 Downloads

Parametric Sliding Roadway Security Fence Gate

Product Version: Revit Architecture 2013

8695 Downloads

Did a project recently and needed to know turn clearances for a gurney so I built this family. Fully parametric. Can change between having back wheels fixed/front wheels pivoting and all wheels pivoting. Could also be used as a basepoint for car turning but would not be perfect.

Product Version: Revit Architecture 2016

2133 Downloads

Parametric Church Pew

-Length

-Depth

-Material

-Kneel Board Down/Up

Automatically inserst middle supports based off the overall length.

Edit - Slight adjustment to paramaeters to make the end offsets evenly spaced with any middle supports. Also the kneel board is now cut at all supports when down.

Product Version: Revit Architecture 2013

11161 Downloads

Parametric Brick arch which auto adjusts based on brick size, opening width and spring height

Product Version: Revit Architecture 2013

6160 Downloads

2 way swing door. change angle of swing

Product Version: Revit Architecture 2013

8376 Downloads

Updated parametric chainlink fence. Fixed an issue with post caps visibility parameter.

Added ability to slope fence using a 'delta elevation' parameter

Product Version: Revit Architecture 2013

31235 Downloads

A parametric pass thru window with countertop sill.

Parameters:

-width

-height

-sill thickness

-interior sill overhang

-exterior sill overhang

-glazing offset

-pass through width and height

-talking hole height and radius

-materials

Product Version: Revit Architecture 2013

2820 Downloads

Basic Lounge Chair. Change the Backrest angle to anything between 5° and 70°

Product Version: Revit Architecture 2013

11721 Downloads

Parametric

Product Version: Revit Architecture 2013

6247 Downloads

Fully parametric Chainlink fence. Works at any length.

Product Version: Revit Architecture 2013

12383 Downloads

Revit 2021 Line Based Detail Item Stair or Ramp Arrow Family.

Parameters include: Visibility of "Slope Label", "UP/DN Label", "Arrow Head", "Dot" as well as a rotation for the "UP/DN Label" and offsets for label positioning and arrow and dot sizes.

No Rating

Product Version: Unknown

943 Downloads

Fully Parametric.

No Rating

Product Version: Revit Architecture 2013

3290 Downloads

Parametric portable loading ramp. Modeled slightly based on Duraramp design but not exact copy.

No Rating

Product Version: Revit Architecture 2016

929 Downloads

I have made a spirograph detail item in revit for fun. You can see some of the designs which can be made inlcuding a standard oval. There are many parameters to adjust to alter the shape. Some notes on how they work are:

-i have placed 180 of the nested spirograph dot family and adjusted the rotation parameter of each so that there is 1 ever 2 degrees of rotation meaning the spirograph covers a total of 360 degrees.

-if the larger circle radius can be divded equally by the smaller circle radius then the pattern will complete in one 360deg rotation

-if the larger larger circle radius is not equally divisible by smaller circle radius (ex. LR = 100, SR = 60 then you wil have to find lest common multiple of LR to figure out how many rotations around the large circle are required (3 x 100 = 5 x 60 = 300) and place multiple of the item and rotate into alignment using the radial arm parameter turned on.

- if the small radius is exactly half the large radius you will be making an oval, the number of complete rotations the small circle makes indicates how many vertices there are if thats what you want to call them.

- if the arm length is greater than small radius then you will get the loops at the vertices, if the length is smaller than you will get rounded vertices

No Rating

Product Version: Revit Architecture 2020

232 Downloads

Built a fully parametric draw bridge to test out some things. Enjoy

No Rating

Product Version: Revit Architecture 2016

895 Downloads

Fully Parametric Bench Top. Family can be nested into Host family to build the base and framing. REVIT 2022

Parameters:

- Outside Radius

- Inside Radius

- Panel Width

- Panel Thickness

- Panel Gap

- Total Angle

- Material

No Rating

Product Version: Unknown

122 Downloads

Follow up to my previous bench top post. Revit 2022

Have added the supports and associated parameters.

Everything is fully adjustable. There is a lot of math to make things work properly and align.

No Rating

Product Version: Unknown

349 Downloads

Follow up to my previous bench top post.

Have added the supports and associated parameters.

Everything is fully adjustable. There is a lot of math to make things work properly and align.

No Rating

Product Version: Unknown

674 Downloads

Update to my previous family. Added a fully parametric backrest which can be turned on and off. 

Works for all total rotation angles between 10 and 360.

Revit 2022

No Rating

Product Version: Unknown

1231 Downloads

Revit 2022

door family with varrying panels of that style which can be switched with a family type parameter.

Parameters include:

- Width

- Height

- Frame Thickness

- Thickness (door)

- Center Rail Height

- Top Rail Width

- Center Rail width

- Side rail width

- Bottom Rail Width

- Trim Width

- Trim Thickness

- Handle Height

- Handle Inset

- New (instance)

- Existing (instance)

- Undercut (instance)

- Deadbolt On/Off (instance)

No Rating

Product Version: Unknown

1150 Downloads

Revit 2022

Door family with varrying panels of that style which can be switched with a family type parameter.

Parameters include:

- Width

- Height

- Frame Thickness

- Thickness (door)

- Center Rail Height

- Top Rail Width

- Center Rail width

- Side rail width

- Bottom Rail Width

- Trim Width

- Trim Thickness

- Handle Height

- Handle Inset

- New (instance)

- Existing (instance)

- Undercut (instance)

- Deadbolt On/Off (instance)

No Rating

Product Version: Unknown

1013 Downloads

Made a quick pitless weighbridge as it was requested in the forums.

Fully parametric.

No Rating

Product Version: Revit Architecture 2020

421 Downloads

Revit 2022

Door family with varrying panels of that style which can be switched with a family type parameter.

Parameters include:

- Width

- Height

- Frame Thickness

- Thickness (door)

- Center Rail Height

- Top Rail Width

- Center Rail width

- Side rail width

- Bottom Rail Width

- Trim Width

- Trim Thickness

- Handle Height

- Handle Inset

- New (instance)

- Existing (instance)

- Undercut (instance)

- Deadbolt On/Off (instance)

No Rating

Product Version: Unknown

269 Downloads