Revit 2018 Dryer Vent with Pipe and wall cutting void_parametric

Product Version: Unknown

1171 Downloads

Revit 2018 Concrete Pier Block_parametric

No Rating

Product Version: Unknown

1549 Downloads

Revit 2018 Water Heater Stand_parametric

No Rating

Product Version: Unknown

785 Downloads

Revit 2018 Ellipse Passageway Casing_created with door template_parametric

No Rating

Product Version: Unknown

739 Downloads

Revit 2018 Arch Passageway Casing_created with door template_parametric

No Rating

Product Version: Unknown

2629 Downloads

Revit 2018 Curved Wall Opening_parametric

How to use:

1. Create a curved/radial/radius wall in plan view.

2. Load the family while still in plan view.

3. Select "Place on Work Plane".

4. Place the family on the midpoint of the exterior curved wall.

5. Open a 3D view and select the opening.

6. Select "Edit Type" in the "Properties Palette" in order to enter the radius of your wall and the appropriate wall depth/thickness in the family.

7. Select "Cut Tool", select the opening, and then select the wall.

**Note: You will have to adjust the radius of the wall or the width of the opening should the family fail to flex. I created a few Family Types to help. All other Parameters flex without issue. Be sure that you enter a value for the wall depth that will cut through your entire wall.

No Rating

Product Version: Revit Architecture 2018

1902 Downloads

I included a .txt file so that you can use the Type Catalog in the image. Place the .txt file in the same location (directory) as this family. You can enter the nail types manually, but the catalog is much easier.

Also, this family allows you to cut through material by using the cut tool.

The Dimensions are based off of Appendix A Table L4 of the NDS (National Design Specification For Wood Design) 2005 Edition.

CSI (Construction Specifications Institute) MasterFormat 06 05 23.10 Nails.

No Rating

Product Version: Revit Architecture 2018

644 Downloads