 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
|
Product Version: Revit Architecture 2019
46 Downloads
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
|
Product Version: Revit Architecture 2019
24 Downloads
|
|
|
 |
The ventilation cowl from JUAL is 20 x 20 cm cross section and 30 cm high. It can be delivered in different sizes, insulated or non-insulated. |
No Rating |
Product Version: Revit Structure 2019
97 Downloads
|
|
|
 |
Vent for pressure equalizaton of roof constructions. Can be supplied in stainless steel and in various plastic types. |
No Rating |
Product Version: Revit Architecture 2019
75 Downloads
|
|
|
 |
Roof console / flashing with bitumen top membrane. It is fixed to the roof with a "socket set screw" or a toggle anchor. Fasteners are not included and are purchased separately from JUAL.
|
No Rating |
Product Version: Revit Architecture 2019
44 Downloads
|
|
|
 |
Roof consoles from JUAL for fixing technical installations to the roof are supplied with integrated bitumen membranes. The consoles apply to flat roofs as well as pitched roofs and secure a waterproof and strong connection between roof construction and the technical installation.This roof console applies to roof surfaces with one layer of bitumen membrane. |
No Rating |
Product Version: Revit Architecture 2019
52 Downloads
|
|
|
 |
As a beautiful finish on both the roof and facade, the JUAL ROOFLINE Parapet System is used for buildings with flat roofs. |
No Rating |
Product Version: Revit Architecture 2019
659 Downloads
|
|
|
 |
As a beautiful finish on both the roof and facade, the JUAL ROOFLINE Parapet System is used for buildings with flat roofs. |
No Rating |
Product Version: Unknown
411 Downloads
|
|
|
 |
This soil pipe ventilation is for insertion into soil pipes that terminate below roof surface. The range fits soil pipes with DN-diameters from ø50 to ø200 mm.
|
No Rating |
Product Version: Revit Architecture 2019
136 Downloads
|
|
|
 |
The soil pipe ventilation with double pipe has an movable pipe for installation in a soil pipe which is lead through the roof surface. It fits soil pipes in DN diameters from ø50 to ø110 mm. |
No Rating |
Product Version: Revit Architecture 2019
253 Downloads
|
|
|
 |
The JUAL Vapour Barrier Roof Outlet is a vertical roof outlet which is installed in the vapour barrier below the insulation. The bottom part of the outlet fits into a standard downpipe. The upper part of the outlet pipe is wider and has a lip seal. It works as a watertight socket for a standard roof outlet which is installed at the roof surface.The vapour barrier roof outlet is available in one length and in various standard diameters. |
No Rating |
Product Version: Revit Architecture 2019
87 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
16 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
11 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
7 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
8 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
16 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
12 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
8 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
19 Downloads
|
|
|
 |
|
No Rating |
Product Version: Revit Architecture 2019
28 Downloads
|
|
|
 |
For leading cables through flat roof surfaces with bitumen or foil (single ply) roof membranes in a watertight manner. E.g. at solar panels, air conditioners and other electrical equipment. The detachable bends makes installation flexible and easy to handle. |
No Rating |
Product Version: Revit Architecture 2019
25 Downloads
|
|
|
 |
For leading cables through flat roof surfaces with bitumen or foil (single ply) roof membranes in a watertight manner. E.g. at solar panels, air conditioners and other electrical equipment. The detachable bends makes installation flexible and easy to handle. |
No Rating |
Product Version: Revit Architecture 2019
65 Downloads
|
|
|
 |
For secure lead-through of cables and pipes on flat roofs. The Cable Flashing Ø160 is delivered with integrated membrane for installation on roofs with bitumen or foil membrane. Both the pipe and the top are equipped with an EPDM rubber edge. The top is detachable for easier cable and pipe adjustment. |
No Rating |
Product Version: Revit Architecture 2019
79 Downloads
|
|
|
 |
For leading cables through the roof membrane on flat roofs in a watertight manner. E.g. at solar panels, air conditioners and other electrical equipment. |
No Rating |
Product Version: Revit Architecture 2019
37 Downloads
|
|
|
 |
For leading cables through the roof membrane on flat roofs in a watertight manner. E.g. at solar panels, air conditioners and other electrical equipment. |
No Rating |
Product Version: Revit Architecture 2019
29 Downloads
|
|
|
 |
The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet. |
No Rating |
Product Version: Revit Architecture 2019
186 Downloads
|
|
|
 |
The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet. |
No Rating |
Product Version: Revit Architecture 2019
85 Downloads
|
|
|
 |
The vertical bowl outlet consists of a bowl that cumulates the water before it flows down into the pipe system of the building via vertical pipes of standard diametres from ø50 to ø110 mm.Bowl outlets are made from stainless steel and can be delivered with integrated bitumen or foil membrane. |
No Rating |
Product Version: Revit Architecture 2019
78 Downloads
|
|
|
 |
The vertical bowl outlet consists of a bowl that cumulates the water before it flows down into the pipe system of the building via vertical pipes of standard diametres from ø50 to ø110 mm.Bowl outlets are made from stainless steel and can be delivered with integrated bitumen or foil membrane. |
No Rating |
Product Version: Revit Architecture 2019
71 Downloads
|
|
|
 |
The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types. |
No Rating |
Product Version: Revit Architecture 2019
140 Downloads
|
|
|
Search