Snow fence tube protects your inhabitants from falling snow during the melting season.

 The snow fence satisfies SS 831335

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

1833 Downloads

Snow fence profile protects your inhabitants from falling snow during the melting season.

 The snow fence satisfies SS 831335

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

900 Downloads

Roof steps are a simple way to creat an access route, for example, up to a chimney. They may be used on roofs of up to a 4-meter access height with a pitch of a 45 degrees.

They are installed in a straight line one over the other are finished off with anchoring device for personal fall protection, for example , a rdige rail.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

472 Downloads

Roof steps are a simple way to creat an access route, for example, up to a chimney. They may be used on roofs of up to a 4-meter access height with a pitch of a 45 degrees.

They are installed in a straight line one over the other are finished off with anchoring device for personal fall protection, for example , a rdige rail.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

242 Downloads

The function of the anchor loops and ridge rail is to rofm an anchor point for personal fall protection. The ridge rail is used on pitched roofs; on low-pitched roofs (pitches of less than 6 degrees) with asphalt or artificial material-based sealing surfaces, anchor loops are used.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

373 Downloads

The function of the anchor loops and ridge rail is to rofm an anchor point for personal fall protection. The ridge rail is used on pitched roofs; on low-pitched roofs (pitches of less than 6 degrees) with asphalt or artificial material-based sealing surfaces, anchor loops are used.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

224 Downloads

Facade ladder for evacuation, ascending to the roof and chimney.

Installed with a bracket depending on the depth of the roof foot. Handrails shall be installed with a bracing kit on facade ladders and on roofs or other permanently installed access device.

Satisfies the requirements set out in SS 831340

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

720 Downloads

Rail (0.5 m height) at the access hatch and around skylights etc. from supports when ascending/descending to the roof and shall prevent people from going onto roof areas that cannot withstand the weight of a person.

They are also approved for the anchoring of personal fall protection according to SS 831333.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

554 Downloads