Forums
|
Forums >> Revit Building >> Technical Support >> DRAWING ANGLED WALLS
|
|
|
active
Joined: Wed, Apr 19, 2006
9 Posts
No Rating |
Was just wondering if anyone knew how to draw an angled wall in Revit 9. By angled I mean straight in plane but the bottom and top of the wall are offset from each other. The top of the wall sticks out over the bottom. How do you get a wall to do this without having to create a mass instead?
|
This user is offline |
|
 | |
|
|
site moderator|||
Joined: Tue, May 16, 2006
13079 Posts
 |
If you mean the wall lies in a vertical pane then click on the wall and choose edit profile from the options bar.... Yo can create a parallelgram or even a circular wal. If not that, then please clarify.
|
This user is offline |
|
|
|
active
Joined: Thu, Nov 10, 2005
390 Posts
|
Use massing.
|
This user is offline |
|
|
|
active
Joined: Wed, Apr 19, 2006
9 Posts
No Rating |
Thanks guys but I needed to draw glass curtain wall on an angle, and be able to put a curtain grid on it to create mullions quickly. I did make a mass out of glass and it worked but I was unable to apply a grid. Just wondering if there was a quicker way of doing it thats all.
|
This user is offline |
|
|
|
site moderator|||
Joined: Fri, Feb 10, 2006
1874 Posts
 |
watch this free cadclip from CADClips (DGCAD). you can do the same with straight line also. it should solve your problem http://www.cadclips.com/downloads/CADCLIP-CURVED-CURTAIN-SYSTEM.wmv HTH
-----------------------------------
best regards, coreed,aia bmpArchitects,Inc. "Revit has to be implemented, Not installed." Long Live Revit |
This user is offline |
|
|
|
active
Joined: Wed, Apr 19, 2006
9 Posts
No Rating |
Thankyou so much for that... problem solved!
|
This user is offline |
|
|
|
active
Joined: Tue, Nov 20, 2007
2 Posts
No Rating |
I am rather new to Revit and need some instructions on how to use the mass and face option for bulding walls. I'm trying to build a curved angled wall, but I just can't figure out how to go about it.
|
This user is offline |
|
|
|
active
Joined: Tue, Nov 20, 2007
2 Posts
No Rating |
I am rather new to Revit and need some instructions on how to use the mass and face option for bulding walls. I'm trying to build a curved angled wall, but I just can't figure out how to go about it.
|
This user is offline |
|
|
|
Similar Threads |
|
Making Angled or canted walls |
Revit Building >> Technical Support
|
Tue, Jun 3, 2008 at 2:10:07 PM
|
5
|
|
Angled Walls in Revit |
Revit Building >> Tips & Tricks
|
Mon, Jan 12, 2015 at 8:48:26 AM
|
6
|
|
Curved Angled Glass Walls |
Revit Building >> Technical Support
|
Thu, Jan 20, 2011 at 3:01:49 PM
|
4
|
|
Revit 2011-putting openings in angled walls. |
Revit Building >> Technical Support
|
Sat, Sep 10, 2011 at 5:45:27 AM
|
3
|
|
angled walls |
General Discussion >> Revit Project Management
|
Thu, Jun 25, 2009 at 11:08:21 AM
|
7
|
|
|
Site Stats
Members: | 2106071 | Objects: | 23178 | Forum Posts: | 152305 | Job Listings: | 3 |
|
Search