Forums >> Revit Building >> Technical Support >> 2020 revit - doors not recognizing rooms in a phased project

arcitek66

active

Joined: Sat, Nov 16, 2013
0 Posts
No Rating

I have a phased project (3 phases) and none of the doors are recognizing the rooms.  The error message keeps mentioning there is no room information with the door.  I checked the door families and the Door Location in ticked on showing the swing to or from arrow.  The arrow is long enough to be in each room.  The Door Schedule will show no room name or any"To" or "From" room information.

Room schedule picks up the room names and numbers.  I thought maybe the actual rooms need to have the same phase assigned to them as the doors but you cannot assign phases to the rooms.

I have searched various forums but everyone seems to suggest the same thing, make sure the door location tick is on in the door family.  Any help would be greatly appreciated.

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Rooms are absolutly phase specific.  Read this:

http://help.autodesk.com/view/RVT/2016/ENU/?caas=caas%2Fsfdcarticles%2Fsfdcarticles%2FRevit-How-to-show-rooms-and-room-tags-in-different-phases.html

This user is offline

arcitek66

active

Joined: Sat, Nov 16, 2013
0 Posts
No Rating

Hello WWHub,

Thank you for the link.  Yes, I finlly figured all of that out with some great help from another forum here.  They brought up some good points that I was not even thinking about plus I found out there was some user error on my side so there is that.

This user is offline

How to Tag all rooms at the same time

10

project set-up - needed/wanting to use/link the same model 2x within project

1

Importing IFC into Revit 2020. Windows/Doors not showing in plan/elevations/sect

0

AutoCAD translation file for phased project

2

Door Schedule Problem - All Room Fields are Blank

1