Forums >> Revit Building >> Technical Support >> Shared Parameter In Annotations

Bennydablade

active

Joined: Mon, Aug 24, 2015
0 Posts
No Rating

I am trying to create an annotation that will read the title block parameters I have set up in each project. For instance, i have created title block parameters that you fill out in project information and they populate on the title block, i.e. lot, block, address etc. We also put that information on the site plan in a notation. I would like for that notation to read the title block parameters. If I change the family category to title block, then it screws with how i can use it in the project, but the parameters work. If it is in another category (generic annotation) then the parameters don't work properly. I have attached the annotation family as well as our title block family. Any help would be great.

-----------------------------------

DO or DO NOT, There is no try!

This user is offline

Bennydablade

active

Joined: Mon, Aug 24, 2015
0 Posts
No Rating

Found this post after continued searching on the forums. Thanks to @WWHUB for the solution.

Tags not "dumb" annotations.

https://www.revitcity.com/forums.php?action=viewthread&thread_id=24945

-----------------------------------

DO or DO NOT, There is no try!

This user is offline

Shared Parameter File Deleted

10

Cannot Locate SHARED PARAMETER FILE!

2

Genereic annotations and shared parameters.

8

Shared Material Between Families

6

Referencing a Shared Parameter in a Family parameter formula.

4