Forums >> Revit Systems >> Technical Support >> Circuit Numbering (UK Templates)

donks38

active

Joined: Sun, Aug 11, 2013
1 Posts
No Rating

Hi

In the UK we number circuits L1, L2 and L3 depending on the phase. So i need a way to number my circuits corresponding to the way and number they are placed in the dis board.Example: On a 12 way 3 phase board, circuit number 4L1 would be the 10th single phase way used, however Revit does not seem to let me number it as 4L1 as it lists all of the 36 outgoing ways and not in groups of 3. So my 4L1 ends up as 10L1 or just circuit 10. I cannot find a way around this and unfortunately even though 10L1 would still get you to the right way on the board it's not accepted by some consultancies or clients......anyone??

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Does this help you?

http://inside-the-system.typepad.com/my_weblog/2010/06/controlling-circuit-naming-to-match-local-standards.html

This user is offline

donks38

active

Joined: Sun, Aug 11, 2013
1 Posts
No Rating

Yes maybe, at least to an extent, not sure if it will allow me to group the circuits as follows though:

Board Way 1  -1L1

Board Way 2  -1L2

Board Way 3  -1L3

Board Way 4  -2L1

Board Way 5  -2L2

Board Way 7  -2L3

etc.......

This user is offline

Electrical circuit prefix separator

0

Circuit Homerun

0

Panel Schedule Circuit # Parameter

0

Fliter By Circuit

0

Split Circuit Receptical Circuiting with Branch Duplex Recepticals

2