Forums >> Revit Building >> Technical Support >> Linked, then Bound, Groups and Levels they reside on?

ETBass

active

Joined: Tue, Apr 30, 2013
0 Posts
No Rating

Working on a Multi-Family complex, in 2013.  Originally we tried to link in the Unit groups.  Decided to Bind these links and use as Groups within current model.  Now that that has been completed, the Groups are on their correct level (in all views plan, section, 3D, etc.), but the offset from the respective level is now at 32'-0", even though the group is shown to be at correct level. 

If I change the current offset 32'-0") to be at the correct level (0'-0"), it wants to fix the Group?  If I choose top Fix Group, it then wants to place the Fixed Group at Level One (even though it was at Level 4 to start with).  When the Linked Units were originally done, they were all done on Level One in their respective file.

All plans, sections, elevations ,etc. show the groups where they should be, but the Base Level offset is whack...any ideas on what to look at?

Thanks

This user is offline

Can individual Objects be bound in Arch then changed in MEP

10

Levels in linked files

8

Cannot turn off levels in linked file

6

Swapping Levels

3

Multiple or repeat levels in linked file

1